• 제목/요약/키워드: 면내변위

검색결과 80건 처리시간 0.026초

홀로스펙클 간섭법을 이용한 3차원 변위측정의 정량적 연구 (Quantitative Analysis of 3-D Displacements Measurement by Using Holospeckle Interferometry)

  • 주진원;권영하;박승옥
    • 대한기계학회논문집
    • /
    • 제17권5호
    • /
    • pp.1208-1217
    • /
    • 1993
  • 본 장치의 핵심은 상 홀로그래피(image holography)시스템을 구성하여 상을 확대시키고, 기준파(reference beam)의 세기를 일반적인 홀로그래피방법에 비해 매우 약하게 하여 홀로그램 기록시 확대된 영상에 스텍클 무늬를 선명하게 기록되도록 한 것이다. 물체에 미소변위를 가하여서 변형 전과후의 상태를 이중으로 기록한 홀로그 램을 얻은 후, 이로부터 확대된 홀로그래피 간섭무늬와 선명한 영의 무늬를 얻을 수 있었다. 본 시험장치로 구성된 홀로스펙클 방법의 신뢰성을 평가하기 위하여 이론적 인 변위량을 알고 있는 외팔보의 변형을 대상으로 하여 실험하였다. 외팔보에 면외 변위와 면내변위를 각각 발생시켜 이때 얻어지는 홀로그래피 간섭무늬와 영의 간섭무 늬의 간격으로부터 면위를 정량적으로 분석하였으며, 면외변위와 면내변위를 동시에 발생시켜 면내변위가 홀로그래피 간섭무늬에 미치는 영향과 면외변위가 영의 간섭무늬 에 미치는 영향을 분석하였다. 또한 홀로스펙클 방법을 이용하여 일반적인 방법으로는 는 측정이 어려운 볼 압입문제의 3차원 변형상태를 측정하고 유한요소법의 결과와 비교하였다.

전자처리 스페클 패턴 간섭법에 의한 2차원 면내변위 측정에 관한 연구

  • 김경석;김형수;양승필;최형철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1992년도 추계학술대회 논문집
    • /
    • pp.172-176
    • /
    • 1992
  • 금속의 조면, 불투명 유리 또는 종이 등의 확산 반사면에 레이저광을 조사하면 확산광 가운데 또는 그 상 가운데 보통의 광에서는 볼 수 없는 반점 모양의 형태가 나타나게 된다. 이러한 현상은 레이저의 단색성, 가간섭성, 집속성등의 우수한 성질과 응용 면에 있어서의 풍부한 가능성으로 레이저 응용계측이 연구되어 왔다. 따라서 레이저 개발에 따른 새로운 계측 법이 급속히 진전되는 가운데 그 중에서 구조 및 재료강도의 계측분야의 일환으로 레이저를 이용하여 물체표면의 정보를 갖는 스페클 패턴(speckle pattern)이 변화하는 성질을 이용하여 어떠한 물체를 상온 하에서 인장력에 의한 면내변위를 2차원적으로 측정하고자 한다.

면내회전자유도를 갖는 4절점 곡면 쉘요소 (A Four-node General Shell Element with Drilling DOFs)

  • 정근영;김재민;이은행
    • 한국지진공학회논문집
    • /
    • 제16권4호
    • /
    • pp.37-52
    • /
    • 2012
  • 이 연구에서는 감절점쉘요소의 개념에 근거한 새로운 4절점 곡면 쉘요소를 제시하였다. 회전장이 독립변수로 도입된 범함수에 의하여 면내회전자유도를 도입함으로써 개발된 쉘요소에서는 절점당 6자유도를 갖도록 하였다. 아울러 쉘요소의 면내거동 개선을 위하여 4개의 비적합변위형에 의한 비적합변위를 면내방향의 변위성분에 추가하였으며, 면외거동 개선을 위하여 대체전단변형률장이 적용되었다. 이 연구에서의 비적합변위형의 수치적 구현에 있어서 일정한 변형률상태를 표현할 수 있도록 하기 위하여 비적합변위형의 직접 수정법이 적용되었다. 이렇게 정식화된 쉘요소 강성행렬의 수치적분에 있어서는 부피적분을 위하여 9점 적분법이 사용되었다. 개발된 쉘요소는 바람직하지 못한 영에너지모드를 갖지 않으며, 일정한 변형률 상태를 표현할 수 있음을 확인하였다. 개발된 4절점 곡면 쉘 요소에 대한 다양한 수치예제를 통한 검증 결과, 전반적으로 양호한 거동을 보여주고 있음을 확인하였다.

레이저 스페클 간섭법을 이용한 면내변위 측정시스템 개발 (The Development of In-Plane Displacement Measurement System on Laser Speckle Interferometry)

  • 윤홍석;김경석;박찬주;최태호;최정석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.556-560
    • /
    • 2005
  • The measurement method by Laser Speckle Interferometry which uses the interference law which will grow precedes and with it explains a resolution measurement ability and together the change of place arrowhead and general measurement, at real-time measurement sensitivity it has application boat song from candle precise measurement field it is increasing. But, currently the domestic application technique to sleeps and optical science military merit by optical science interferometer and directness it composes purchases to the level which it applies the expensive commercial business equipment the outside and in spite of the technical ripple effect is deficient even in many strong point. The hazard which complements like this problem point form technical development it leads from the research which it sees and an application degree and to sleep as the measurement equipment which tries to develop the small-sized optical science interference sensor and an interpretation program it raises it does.

  • PDF

ESPI를 이용한 세탁기 적용 기계 구조물의 면내변위 측정에 관한 연구 (The Study on Measurement of In-Plane Displacement in Mechanical Structure applied to Washing Machine using ESPI)

  • 이학주;김상태;최은오;장석원
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.108-113
    • /
    • 2001
  • Recently, the mechanical structures applied to many industrial products, especially in electronic products, appear to be miniaturized and complicated. This trend makes it difficult to analyze the stress distribution of those mechanical structures and generates new challenges for precise measurement of strain. Therefore, generally most of those cases largely depend on the finite element analysis. But the development of optical metrology which has the capability of non-contact, full-field and precise measurement makes it possible to solve these measuring problems. Among the optical measurement techniques, the electronic speckle pattern interferometry (ESPI) has been developed and considered as one of the most useful tools for measuring displacement and deformation. But the shortage of recognition and difficulties of measurement have limited its industrial applications in spite of its excellent capabilities. Therefore in this study, in order to enhance the industrial application of ESPI, the measurement of in-plane displacement of mechanical structure with ESPI, which is applied to washing machine and cannot be measured by strain gauges, was performed. And the verification of validity of FEA results was also done.

  • PDF

비틀림하중을 받는 기계구조물의 ESPI를 이용한 면내변위 측정에 관한 연구 (A Study on Measurement of In-Plane Displacement using ESPI in Mechanical Structure under torsional load)

  • 장석원;이학주;최은오;정찬희
    • 대한기계학회논문집A
    • /
    • 제26권4호
    • /
    • pp.693-700
    • /
    • 2002
  • Recently, the mechanical structures applied to many industrial products, especially in electronic products, appear to be miniaturized and complicated. This trend makes it difficult to analyze the stress distribution of those mechanical structures and generates new challenges for precise measurement of strain. In order to solve this measurement problem many optical measurement techniques have been suggested. Among those, the ESPI(Electronic Speckle Pattern Interferometry) has been considered as one of the most useful tools. But the shortage of recognition and difficulties of measurement have limited its industrial applications in spite of its excellent capabilities. Therefore in this study, not only the verification of the FEA result but the enhancement of industrial application of ESPI was tried by measuring the in-plane displacement of mechanical structure with ESPI, which is difficult to be measured with strain gauge.

초기 면내하중을 받는 복합적층판의 저속충격거동 및 손상해석 (Low-Velocity Impact Response and Damage Analysis of Composite Laminates Under Initial In-plane Loading)

  • 최익현
    • Composites Research
    • /
    • 제22권1호
    • /
    • pp.1-8
    • /
    • 2009
  • 본 논문에서는 면내하중을 받는 복합적층판의 저속충격거동과 손상을 해석하였다. 초기부터 존재하는 면내변형률을 고려하여 판의 변위장을 새롭게 가정하고, 이 가정된 변위장에 따른 적층판의 구조거동에 대한 유한요소방정식을 유도하였으며, 유한요소해석 프로그램을 코딩하였다. 유한요소해석을 수행하여 참고문헌의 수치해석 결과와 비교하였으며, 충격에너지는 동일하나 충격체의 질량과 속도가 다른 조건에 대해서도 해석하여 초기 면내하중의 영향을 분석하였다. 바닥으로부터 첫 번째 층간면에서의 잠재적인 층간분리 파손영역을 추정하여 초기 인내하중 및 충격조건에 따른 크기의 변화를 고찰하였다.

3차원 비정형 Setback 구조물의 동적 특성 (Dynamic Characteristics of a 3-dimensional Irregular Setback Structure)

  • 문성권
    • 전산구조공학
    • /
    • 제11권4호
    • /
    • pp.287-294
    • /
    • 1998
  • 입면의 형태가 임의의 층에서 큰 차이를 보이는 3차원 비정형 setback 구조물의 동적 거동 특성과 이들 구조물의 동적 거동에 미치는 바닥 슬래브의 면내 변형 효과를 분석하였다. 비정형 setback 구조물의 전반적인 동적 거동특성을 분석하기 위하여 베이스 부분의 평면적과 타워 부분의 평면적 비(R?), setback 발생위치(L?)등을 매개 변수로 사용하였다. 48개의 비정형 setback 구조물들에 대한 해석 수행 결과 setback 구조물은 정형 구조물에 비해 횡방향 1차 모드의 유효 모드 중량(effective modal weight)이 작게 나타나는 경향을 보이기 때문에 setback 구조물의 동적 거동을 파악하기 위해서는 등가 정적 해석법 대신에 동적 해석을 수행할 필요가 있음을 알 수 있었다. 바닥슬래브의 면내 변형은 보다 긴 구조물의 고유 진동 주기값을 가져오며 모드 순서 및 모드 형상에도 변화를 준다. 이러한 사실은 바닥슬래브의 면내 변형으로 인하여 횡방향 저항 요소들간의 전단력 분포와 층 변위가 영향을 받을 수 있다는 것을 의미한다. 이러한 현상은 횡방향 저항 요소들간의 강성 차가 심한 프레임-전단벽 시스템에서 두드러지게 나타난다.

  • PDF

면내 회전을 갖는 SPLINE 유한대판 요소에 의한 쉘의 해석 (Analysis of Shell Using the Spline Finite Strip with Drilling DOF)

  • 최창근;홍현석
    • 한국전산구조공학회논문집
    • /
    • 제12권2호
    • /
    • pp.185-199
    • /
    • 1999
  • 본 연구에서는 새로운 spline 유한대판 요소를 제안하였다. 제안된 정식화는 등매개 개념에 의해 기하학적 형상과 변위장을 가정함에 있어 길이방향은 3차의 B-spline 곡선으로, 횡방향에 대해서는 Lagrange 다항식에 의해 표현된다. 이 논문은 평판과 쉘해석에 있어서의 등매개 spline 유한대판 요소의 개선에 목적을 두고 있다. 이 새로운 요소는 스트립의 내부 절점에서 6개의 자유도를 갖는 합-응력 감절점 쉘 요소로부터 유도하였다. 스트립의 기하학적 형상은 강체 회전에 대한 정의에 위배되지 않고도 두께 방향을 따라 Jacobian이 일정하다는 가정을 따랐으며 고체역학에서 정의되는 면내 회전을 penalty 함수에 의한 구속조건으로 간주하여 면내 회전에 관계된 자유도를 생성하였다. 제안된 요소에 대하여 쉘의 전형적인 문제에 대한 수치예제를 보였으며 이 스트립 요소의 성능을 평가하였다.

  • PDF