• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.115-120
• /
• 1980

A kinetic study of the methanolysis of t-butylbromide and benzoylchloride in methanol-acetonitrile mixtures is reported. First order rate constants for the methanolysis of t-butyl bromide show maximum at $X_{MeOH}$=0.75∼0.9 and 25∼$50^{\circ}C$. Apparent second order rate constants for the methanolysis of benzoylchloride also show maximum at $X_{MeOH}$= 0.6∼0.95 and 12∼$26^{\circ}C$. The maximum rate is ascribed to the solvent structure change; the addition of acetonitrile to methanol perturbs the methanol structure increasing the free methanol molecules available to stabilize the transition state for the methanolysis of t-butylbromide and benzoylchloride. It has been shown that methanol acts as nucleophilic and electrophilic catalyst upon methanolysis of t-butylbromide and as electrophilic catalyst upon methanolysis of benzoylchloride.

• Journal of Energy Engineering
• /
• v.19 no.3
• /
• pp.195-202
• /
• 2010

A third of primary energy is lost as a waste heat. To improve this inefficient use of energy, systems using chemical reaction have been suggested and studied. In this study, methanol decomposition/synthesis reaction as a chemical reaction was selected for long time heat storage and long distance heat transport system because of safe, cheap and gaseous product. The purpose of this study is to find the optimal conditions in the methanol decomposition and synthesis reactions for long distance heat transport. Several parameters such as reaction temperature, pressure, $H_2$/CO ratio, space velocity, catalyst particle size were tested to find the effects on the reaction rates for the methanol synthesis. And the reaction temperature, space velocity, catalyst particle size were tested to find the effects on the production concentration for the methanol decomposition.

• Clean Technology
• /
• v.13 no.4
• /
• pp.251-256
• /
• 2007

Several studies regarding depolymerization of polycarbonate waste to get the essential monomer, bisphenol A, have been reported in recent years. However, those methods have some environmental safety problems of using highly toxic organic solvents as well as product separation problem due to the use of alkali catalyst. In this study, we proposed the combination of glycolysis and methanolysis to depolymerize the polycarbonate waste. Glycolysis reaction reached at the reaction equilibrium after about 180 minat 473.15K and dissolution of the polycarbonate was found to be a rate controlling step of the reaction. The yield of BPA was improved with the aid of combination of glycolysis and methanolysis. The methanolysis was carried out at a temperature range of $303.15K{\sim}363.15K$ and MeOH/PC molar ratio $0.5{\sim}3$. The yield of BPA had a maximum at 1.0 MeOH/PC molar ratio and increased with the reaction temperature.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.288-294
• /
• 1980

Methanolysis rate constants were determined for $CH_3O(CO)Cl,\;CH_3S(CO)Cl\;and\;CH_3S(CS)Cl\;in\;CH_3OH-CH_3CN$ mixtures. Results show that the rates are not predominantly influenced by the bulk solvent properties but are partly influenced by specific electrophilic solvation.Polarity of the solvent is not a dominant factor but it nevertheless plays a role in charge stabilization of the $S_N1$ like transition state. The methanolysis proceeds through $S_N1$ mechanism for $CH_3S(CS)Cl$ for which both specific solvation of leaving group by methanol and charge stabilization by a high dielectric medium are important, while for $CH_3O(CO)Cl\;methanolysis occurs\;via\;S_N2$ mechanism in which both of the solvent effects are unimportant.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.25-30
• /
• 1987

Solvolysis of tert-butyl halides and 1-adamantyl tosylate in methanol-acetone mixtures and solvolysis of tert-butyl bromide in methanol-chloroform mixtures have been studied. Solvent ionizing power of methanol-acetone mixtures were calculated by the Grunwald-Winstein equation and discussed the Y value variation caused by substrate changes. Y values based on 1-adamantyl tosylate is superion to others since it varies in wide range for methanol-acetone mixtures. It was found that the order of electrophilic assistance to leaving group is OTs > Cl > Br > I.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.94-94
• /
• 2000

증류수(Distilled Water)와 메탄올(CH3OH)의 혼합용액을 전기분해하여 Si 기판위에 다이아몬드상 카본을 증찰하였다. Si 기판은 HF(16%) 용액으로 산화막을 제거하고, 전이금속 Co, Ni 박막을 증착시킨 후 전기 분해 장치의 전극 (-)단자에 연결하였다. (+)단자에는 순도 99%의 탄소 전극을 사용하였다. 기존의 에탄올, 에틸렌 글리콜(H2O-HOCH2CH2OH), 메탄올등의 전해질에 1000V 이상의 고전압을 인가하는 방법대신 메탄올과 증류수, 그리고 암모니아수(NH4OH)의 비를 달리하는 혼합액을 전해질로 사용하였다. 그결과 낮은 전압 (800V 이하)과 낮은 온도(6$0^{\circ}C$ 미만)에서도 다이아몬드상 카본을 증착할 수 있었다. 증착한 시료와 용액은 XRD, SEM, FT-IR 등을 이용하여 분석하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.334-342
• /
• 1998

In this experimental study, methanol was chosen as a system material for a long -distance heat transportation. Not only transition metals but also noble metals were investigated as an active component, and several metal oxides, such as ${\gamma}$-$Al_2$,$O_3$, $SiO_2$, etc. as a support. In general, transition metal catalysts absorbed more heat than noble metal catalysts. The amount of heat absorption and CO selectivity depends on temperature and methanol partial pressure, and 25$0^{\circ}C$ Ni/$SiO_2$ catalyst showed the best result for methanol decomposition reaction.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.46-53
• /
• 2007

We depolymerized PET in supercritical methanol and observed the yield of DMT at various reaction conditions. At subcritical state below $240^{\circ}C$, the yield of DMT was very low, about only 50%. It increased dramatically to 80% at supercritical state above $260^{\circ}C$, thereafter the increasing rate was reduced significantly. Similarly, at subcritical state of 6.89 MPa, the DMT yield was only 50%, but it increased abruptly to 85% at supercritical state of 10.34 MPa, yielding no further increase above the pressure. Within 10 minutes after the beginning of the reaction, the DMT yield reached 80%, indicating that the significant portion of the reaction has proceeded, and then, the yield increased slowly. The methanol/PET ratio of 8 showed the maximum DMT yield. We found the optimum depolymerization condition fur PET methanolysis is temperature $300^{\circ}C$, pressure 10.34 MPa, reaction time 40 minutes, and methanol/PET ratio of 8.

• Clean Technology
• /
• v.8 no.1
• /
• pp.39-44
• /
• 2002

In order to recycle poly(ethylene terephthalate), methanolysis has been investigated at elevated temperature and under high pressure without catalyst to afford dimethyl terephthalate and ethylene glycol. The reaction was carried out under 62 atm, $310^{\circ}C$ for 50min to obtain 98% dimethyl terephthalate. The method has been suggested as a simple and economical one to recycle the poly(ethylene terephthalate).

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.382-386
• /
• 1997

In the present study, an attempt was made to investigate the effects of steeping treatment on browning of onion hydrolysate. After steeping treatment with solvents, phenols content of methanol and ethanol were showed 25.1mg/ml and 24.9mg/ml. And absorbance of methanol and ethanol was showed 0.26 and 0.22. L and b value of treatment with methanol and ethanol were lower than other solvents. Browning reaction of onion hydrolysate was decreased with increasing concentration of ethanol. Treatment of above 80% ethanol was effective to remove phenols and was showed a low color intensity. Treatment with 80% ethanol was more effective than addition of cystein to remove phenols and to decrease browing degree.