• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.564-577
• /
• 2015

The objectives of this study were to investigate the possibility of establishing a tree nursery at Saemangeum reclaimed land and to classify landscape trees based on the salt tolerance. A tree nursery (2.0 ha) was made in Gunsan Okgu area in 2012 with underground drain lines on the reclaimed land established in 2010. Salt content of the nursery soil within the 60 cm depth in 2013 was 5.13 dS/m and 8.20 dS/m for the pre-desalinated and non-desalinated lands, respectively. Thirty-six woody plant species (22 tree species and 14 shrub species at ages of 1 to 4) with a total of 3,943 individuals were planted in early April, 2013 and their growth performance was monitored until September of the same year. The average survival rate of the transplanted plants was 71.4% in late September, suggesting the high possibility of establishing a tree nursery at the reclaimed land. Based on the survival rate and tree vigor (amount of healthy leaves and crown development), the following 17 species with some salt tolerance were classified into three groups: "salt tolerant group" (3 species, Tamarix chinensis, Cudrania tricuspidata, Ilex serrata), "recommended group" (5 species, Pinus thunbergii, Albizia julibrissin, Ligustrum obtusifolium, Rosa rugosa, Pleioblatus pygmaeus), "plantable group" (9 species, Zelkova serrata, Hibiscus syriacus, Elaeagnus umbellata, Sorbus alnifolia, Sophora japonica, Metasequoia glyptostroboides, Quercus acutissima, Ulmus parvifolia, Robinia pseudoacacia). Seven tree species that had been adapted to the reclaimed land for three to four years before being transplanted to new reclaimed land in Gunsan Okgu area showed average survival rate of 98%, suggesting that pre-conditioned trees would survive well in the reclaimed land.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1119-1124
• /
• 1997

This study was carried out for improvement and correction of the traditional pressure variation method (PVM) in the respiration rate measurements of fresh fruits and vegetables using a microcomputer system and a differential pressure sensor. Water vapor pressure in the container was calculated by equations for psychrometric calculations. At the beginning of experimental period water vapor pressure in the container was increased and maintained constantly in the most experimental period, but was decreased dramatically after $CO_2$ scrubbing. The percentages of water vapor pressure on total differential pressure were $33{\sim}46%$ at $1^{\circ}C$, $23{\sim}45%$ at $11^{circ}C$ and $35{\sim}53%$ at $21^{\circ}C$. The differences between the respiration rates determined by gas chromatography and corrected pressure variation method (CPVM) were $0.2{\sim}0.3\;mgCO_2kg^{-1}h^{-1}$ at $1^{\circ}C$, $0.2{\sim}2.9\;mgCO_2kg^{-1}h^{-1}$ at $11^{\circ}C$ and 1.0{\sim}9.0\;mgCO_2kg^{-1}h^{-1}$ at $21^{circ}C$, while those between gas chromatography and normal pressure variation method (PVM) were $0.8{\sim}1.2\;mgCO_2kg^{-1}h^{-1}$ at $1^{\circ}C$, $3.9{\sim}11.0\;mgCO_2kg^{-1}h^{-1}$ at $11^{\circ}C$ and $8.0{\sim}32.0\;mgCO_2kg^{-1}h^{-1}$ at $21^{circ}C$, respectively. The differences of the respiration rates with CPVM were smaller than those with PVM. CPVM, therefore, were more exact and convenient method than PVM in the measurement of respiration rate of fresh produce.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.47-75
• /
• 2009

Recently, researches on Management Information Systems (MIS) have laid out theoretical foundation and academic paradigms by introducing diverse theories, themes, and methodologies. Especially, academic paradigms of MIS encourage a user-friendly approach by developing the technologies from the users' perspectives, which reflects the existence of strong causal relationships between information systems and user's behavior. As in other areas in social science the use of structural equation modeling (SEM) has rapidly increased in recent years especially in the MIS area. The SEM technique is important because it provides powerful ways to address key IS research problems. It also has a unique ability to simultaneously examine a series of casual relationships while analyzing multiple independent and dependent variables all at the same time. In spite of providing many benefits to the MIS researchers, there are some potential pitfalls with the analytical technique. The research objective of this study is to provide some guidelines for an appropriate use of SEM based on the assessment of current practice of using SEM in the MIS research. This study focuses on several statistical issues related to the use of SEM in the MIS research. Selected articles are assessed in three parts through the meta analysis. The first part is related to the initial specification of theoretical model of interest. The second is about data screening prior to model estimation and testing. And the last part concerns estimation and testing of theoretical models based on empirical data. This study reviewed the use of SEM in 164 empirical research articles published in four major MIS journals in Korea (APJIS, ISR, JIS and JITAM) from 1991 to 2007. APJIS, ISR, JIS and JITAM accounted for 73, 17, 58, and 16 of the total number of applications, respectively. The number of published applications has been increased over time. LISREL was the most frequently used SEM software among MIS researchers (97 studies (59.15%)), followed by AMOS (45 studies (27.44%)). In the first part, regarding issues related to the initial specification of theoretical model of interest, all of the studies have used cross-sectional data. The studies that use cross-sectional data may be able to better explain their structural model as a set of relationships. Most of SEM studies, meanwhile, have employed. confirmatory-type analysis (146 articles (89%)). For the model specification issue about model formulation, 159 (96.9%) of the studies were the full structural equation model. For only 5 researches, SEM was used for the measurement model with a set of observed variables. The average sample size for all models was 365.41, with some models retaining a sample as small as 50 and as large as 500. The second part of the issue is related to data screening prior to model estimation and testing. Data screening is important for researchers particularly in defining how they deal with missing values. Overall, discussion of data screening was reported in 118 (71.95%) of the studies while there was no study discussing evidence of multivariate normality for the models. On the third part, issues related to the estimation and testing of theoretical models on empirical data, assessing model fit is one of most important issues because it provides adequate statistical power for research models. There were multiple fit indices used in the SEM applications. The test was reported in the most of studies (146 (89%)), whereas normed-test was reported less frequently (65 studies (39.64%)). It is important that normed- of 3 or lower is required for adequate model fit. The most popular model fit indices were GFI (109 (66.46%)), AGFI (84 (51.22%)), NFI (44 (47.56%)), RMR (42 (25.61%)), CFI (59 (35.98%)), RMSEA (62 (37.80)), and NNFI (48 (29.27%)). Regarding the test of construct validity, convergent validity has been examined in 109 studies (66.46%) and discriminant validity in 98 (59.76%). 81 studies (49.39%) have reported the average variance extracted (AVE). However, there was little discussion of direct (47 (28.66%)), indirect, and total effect in the SEM models. Based on these findings, we suggest general guidelines for the use of SEM and propose some recommendations on concerning issues of latent variables models, raw data, sample size, data screening, reporting parameter estimated, model fit statistics, multivariate normality, confirmatory factor analysis, reliabilities and the decomposition of effects.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.70-83
• /
• 2013

To widen prospect of villa as Korea traditional garden, the result of the research about constructional characteristics of Seogo-jeongsa and Sameun-jeong of Yeoju Lee family at Toero-ri, Miryang-si, Gyeongsangnam-do, Korea, is abstracted as below. Seogo-jeongsa(西皐精舍) and Sameun-jeong(三隱亭) was intended to practise retirement with sense of unity with the head residence, since Seogo-jeongsa was 340m far and sameun-jeong was 630m far away from head residence, which set within 1km. Although Seogo-jeongsa's basic prop, Sameun-jeong's timber, which are both from designer's pen name and head residence name, "Hangjae(恒齋)" and "Yongjae(庸齋)," and Hanseoam have each different exposure, it is homogeneous as space configurational side in order to optimize the gaze leading effect and appreciated domestic trees from the pond, which is center of the garden and the significant facility. Method of direction of Seogo-jeongsa's Hwalsudang(活水塘) and Sameunjeong's pond of Sameun-ji(三隱 池) gets attention by distinction. Especially, directing of 3 step water flow from behind to front and traditional pond method, called Bangji-Bangdo(方池方島), were very unique that any other place can be found. Also, the middle islet on the pond at both villa, which isn't more supper, but more for the symbolic molding that seek a stone pagoda(石假山), is more interesting directing method as considering the relationship of the 3 stone pagoda imageries on the surface of Ghwayukchon(果肉泉) At the same time, Seogo-jeongsa and Sameun-jeong shows very different characteristics from traditional villa that adopted both domestic trees and foreign trees. Particularly, it is extremely exceptional case to plant vigorous needleleaf tree, such as Chamaecyparis pisifera, C. obtusa, Pinus bungeana, P. palustris, Sciadopitys verticillata, Metasequoia glyptostroboides and Cedrus deodara, on Sameun-jeong. Moreover, adopting foreign wild needleleaf trees for landscaping trees, such as a Torreya nucifera, Taxus cuspidata, P. parviflora, and foreign landsacping trees, such as P. bungeana, Cryptomeria japonica and C. obtusa tells planting trend of the late Joseon dysnasty era. Also, as we can know from 2 Jipgyeong(集景), which is 'Seogo-jabyoung 17 young(西皐雜詠十七詠)', and 'Sameun-jeong 12 Gyoung(三隱亭十二景)' which are set on both villa, the intend to expand the garden area is strongly shown by the natural forest directing. As a result, Seogo-jeongsa and Sameun-jeong, located at Toero-li Miryang, are sharing the traditional Joseon dynasty era's custom, such as space and visual composition; however, it is different and attractive garden remains as a point of view of water directing, stone pagodas, and adopting foreign landscaping trees.

• Journal of Korean Classical Literature and Education
• /
• no.32
• /
• pp.159-191
• /
• 2016

This paper describes the procedure of recreating the classics which introduced in author's lecture on "Classics and Creation." The work and result of this paper is based on the activities in the Korean language and literature lecture which the author was leading at university A in Seoul in 2014. This paper aims to identify aspects of introspection that college students underwent during the procedure of recreating. The subjects for analysis were the works created by college students participating in the class through three presentations. In section 2, it is discussed three major issues regarding the process of recreating classics. One is "presentation of the background for the selection of the work to recreate and the way of implementation". Second is "analysis of the original works and case studies on recreated works". Third is "recreation of works and meta writing". Those activities were conducted as part of the lecture. In section 3, it is investigated that the pattern of introspection of college students. It focused on analyzing the attitudes of the students toward life based on their selection, analysis, and recreation of classic works. Moreover, their self-assessment of the recreated works was examined as well. It is noted that the attitudes and tendency of students when faced with problems if any. While the students in the class selected diverse works for recreating, this paper compared and analyzed the works and introspective aspects of two students who recreated Simcheongjeon. Therefore, aspects of creativity could be identified based on the pattern of their recreation, which participants subtly describe the relationship with their father in recreated works. In accordance with the analysis, it is required to select more works for an effective class on recreation of classic literature and investigate a more systematic and diverse methodology for doing so. However, since the class for recreation of classic literature uses the narrative of the original work, it would reduce the burden on creation. In addition, it is possible to scrutinize in-depth problems of participant's general issue in life by using classic literature as a medium for introspection. Moreover, it was identified that a public presentation of these works enabled exploring self-narration on more objective aspects and collecting feedback from others.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.693-724
• /
• 2018

This article was started to find a way for creating a performance out of Gut. In order to find such way, the first thing that had to be done was to organize the Gut performances that had been made until now. It was to organize the existing study on the performances and to seek a different way from it, believing that the virtue of a performance is to 'create diversity'. However, it was not easy to organize the Gut performances, which became full-scale in the 1980s, because they were never organized before. Therefore, based on my direct and indirect experience, I have organized the most important performances in chronological order. Most importantly, as the planners of the performances (can sometimes be a group or an organization instead of an individual) are the ones who make the show possible, I have noted on them with keen interest. The National Folk Art Performance Contests in Korea, Theater 'Space Sarang', The Association of Gut, Theater 'Madangsesil', Seoul Nori Madang, and National Gugak center were the center space and planning body of the Gut performances. Recording the history of Gut is a worthwhile work of its own. However, it is a substantial amount of task to be done with individual effort, and it has to be progressed as a public project in order to promote and spread its value. Therefore, this article raises the need for it. Meanwhile, as stated earlier, this article has recorded the history of Gut performances as a precondition to finding a way to create a performance out of Gut. From the experimental organization of the Gut performances history, I could find out that most of the performances had the people who did Gut as the main body and the method of the Gut performance did not significantly deviate from just reenacting the original Gut at the time of when it was performed. Therefore, I have introduced Shinmyeong, the Nori-Pae (troupe), and TheGwangdae, the Korean Traditional Performance troupe, who create Madangguk from various Gut materials. By refining the wholly complicated performance elements of the Gut, it could escape from the 'reenacting' performance to becoming a material or a metaphor for a whole new performance.

• 기호학연구
• /
• no.57
• /
• pp.211-255
• /
• 2018

This paper attempts to "re-read" the webtoon Misaeng, which was once an important issue in the field of public discourse on "labor". Our hypothesis was that the dual actactial structure of Misaeng's hero Jang Geurae gave a dual structure to the entire text, which leads to the discovery of text meaning that was not mentioned in the existing discourse. This is based on the concept of 'meta-story character', which Hiroki Azuma talked in his postmodern literary theory. To verify this hypothesis we analyzed the text by applying the Parisian semiotics, more specifically J. Fontanille's theory. Jang Geurae is observed to be a actant of dual structure divided into 'character' of the enunciated level and 'player' of the enunciation level. Considering this characteristic of the hero, Misaeng can be interpreted as a metafiction that shows the 'shifting' between the subject of the enunciated level and the subject of the enunciation level. On the level of 'character' Jang's existence mode turns out to be "Deficiency (actualized)", but on the level of 'player' Jang 's existence mode turns out to be "Inanity(potentiallized)." His somatic responses also show a duality, which is represented by Fontanille's corps-actant model, where on the level of 'character' the somatic actant of Jang consists of 'Moi-chair(ego-flesh)' and 'Soi-idem(self-idem)', and on the level of 'player' it consists of 'Moi-chair(ego-flesh)' and 'Soi-ipse(self-ipse)'. The former mainly acts as a 'role' and takes charge of exteroceptive perception, while the latter mainly acts as 'attitude' and takes charge of interoceptive perception. Because of this dissociative nature of actant, Jang's two 'self' draw the re-adjustment of values without serious conflict between the collective norms and the individual identity. This is in sharp contrast with other characters who struggle with the conflict between the environment and "self". It becomes customary to adopt norms that are suspected to ineffective, but if you raise questions, the normative system can be updated. On one axis of Misaeng there are characters who have lost themselves in customs. On the other axis, there is Jang who can not help dismantling the existing ineffective norms and updating the normative system. Jang's existence mode seems to be one of many possible modes generated by this era where people share no longer solid community values, His actantial structure also communicates with readers of these days who put themselves more in subject of enunciation level than of enunciated level.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.23-46
• /
• 2017

Although there have been cases of evaluating the value of specific companies or projects which have centralized on developed countries in North America and Europe from the early 2000s, the system and methodology for estimating the economic value of individual technologies or patents has been activated on and on. Of course, there exist several online systems that qualitatively evaluate the technology's grade or the patent rating of the technology to be evaluated, as in 'KTRS' of the KIBO and 'SMART 3.1' of the Korea Invention Promotion Association. However, a web-based technology valuation system, referred to as 'STAR-Value system' that calculates the quantitative values of the subject technology for various purposes such as business feasibility analysis, investment attraction, tax/litigation, etc., has been officially opened and recently spreading. In this study, we introduce the type of methodology and evaluation model, reference information supporting these theories, and how database associated are utilized, focusing various modules and frameworks embedded in STAR-Value system. In particular, there are six valuation methods, including the discounted cash flow method (DCF), which is a representative one based on the income approach that anticipates future economic income to be valued at present, and the relief-from-royalty method, which calculates the present value of royalties' where we consider the contribution of the subject technology towards the business value created as the royalty rate. We look at how models and related support information (technology life, corporate (business) financial information, discount rate, industrial technology factors, etc.) can be used and linked in a intelligent manner. Based on the classification of information such as International Patent Classification (IPC) or Korea Standard Industry Classification (KSIC) for technology to be evaluated, the STAR-Value system automatically returns meta data such as technology cycle time (TCT), sales growth rate and profitability data of similar company or industry sector, weighted average cost of capital (WACC), indices of industrial technology factors, etc., and apply adjustment factors to them, so that the result of technology value calculation has high reliability and objectivity. Furthermore, if the information on the potential market size of the target technology and the market share of the commercialization subject refers to data-driven information, or if the estimated value range of similar technologies by industry sector is provided from the evaluation cases which are already completed and accumulated in database, the STAR-Value is anticipated that it will enable to present highly accurate value range in real time by intelligently linking various support modules. Including the explanation of the various valuation models and relevant primary variables as presented in this paper, the STAR-Value system intends to utilize more systematically and in a data-driven way by supporting the optimal model selection guideline module, intelligent technology value range reasoning module, and similar company selection based market share prediction module, etc. In addition, the research on the development and intelligence of the web-based STAR-Value system is significant in that it widely spread the web-based system that can be used in the validation and application to practices of the theoretical feasibility of the technology valuation field, and it is expected that it could be utilized in various fields of technology commercialization.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.510-522
• /
• 1999

The air pollutants ; $SO_2$, $SO{_4}^{-2}$, $NO{_3}^-$, $Cl^-$ are absorbed into soils through falling with dusts and rain from the atmosphere. The sources of heavy metal contaminants in the environments are agricultural and horticultural materials, sewage sludges, fossil fuel combustion, metallurgical industries, electronics and waste disposal etc.. The soils and hydrosphere can be polluted on the way of the circulation of these heavy metals. Studied pollutant anions are $SO{_4}^{-2}$, $NO{_3}^-$ and $Cl^-$ and heavy metals are Se, Mo, Zn, Cd, Pb, Mn, Cr, Co, V, As, Cu and Ni which are the elements to be concerned with the essentials for plants, with animal and human health. This study is with the aim of selecting the species of roadside trees and green space trees which have excellent absorption of air pollutants and heavy metals from the atmosphere and the soils in the urban area. Two areas are designated to carry out this study : urban area ; Kwangju city and rural area ; the yard of Forest Environment Institute of Chollanam-do, at Sanje-ri, Sampo-myum, Naju city, Chollanam-do (23km away from Kwangju). This study is carried out to understand the movement of anions and heavy metals from the soils to the trees in both areas, the absorption of anions and heavy metals from atmosphere into leaves and the amounts of anions and heavy metals in leaves and fine roots(< 1mm dia.) of roadside trees and green space trees in Kwangju and trees in the yard of Forest Environment Institute of Chollanam-do. The tree species selected for this study in both areas are Ginkgo biloba, Quercus acutissima, Cedrus deodara, Platanus occidentalis, Robinia pseudoacacia, Alnus japonica. Metasequoia glyptostroboides. Zekova serrata. Prunus serrulata var. spontanea, and Pinus densiflora. The results of the study are as follows : 1. $SO{_4}^{-2}$, $NO{_3}^-$ and $Cl^-$ concentrations are higher in the soils of the urban area than in those of the rural area, and $NO{_3}^-$ and $SO{_4}^{-2}$ are higher in the leaves than in the roots due to the absorption of the these pollutants through the stomata. 2. Ginkgo biloba, Robinia pseudoacacia. Zekova serrata, Quercus acutissima, and Platanus occidentalis can be adequated to the roadside trees and the environmental trees due to their good absorption of $NO{_3}^-$ and $SO{_4}^{-2}$. 3. Heavy metals in the soils of both areas are in the order of Mn > Zn > V > Cr > Pb > Ni > Cu > Mo> Cd, and in the leaves and roots of the trees in the both areas are in the order of Mn>Zn>Cr>Cu>V>Ni. Both orders are similar ones except V. There are more in the urban soils than in the rural soils in amount of Mn, Zn, Pb, V, Cu. 4. It is supposed that there is no antagonism between Mn and Zn in this study. 5. Se, Co and As are not detected in the soils, the leaves and the roots in both areas. Sn, Mo, Cd and Pb are also not detected in the leaves and roots in spite of considerable amount in the soils of both areas.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.149-161
• /
• 2014

The export of domestic public services to overseas markets contains many potential obstacles, stemming from different export procedures, the target services, and socio-economic environments. In order to alleviate these problems, the business incubation platform as an open business ecosystem can be a powerful instrument to support the decisions taken by participants and stakeholders. In this paper, we propose an ontology model and its implementation processes for the business incubation platform with an open and pervasive architecture to support public service exports. For the conceptual model of platform ontology, export case studies are used for requirements analysis. The conceptual model shows the basic structure, with vocabulary and its meaning, the relationship between ontologies, and key attributes. For the implementation and test of the ontology model, the logical structure is edited using Prot$\acute{e}$g$\acute{e}$ editor. The core engine of the business incubation platform is the simulator module, where the various contexts of export businesses should be captured, defined, and shared with other modules through ontologies. It is well-known that an ontology, with which concepts and their relationships are represented using a shared vocabulary, is an efficient and effective tool for organizing meta-information to develop structural frameworks in a particular domain. The proposed model consists of five ontologies derived from a requirements survey of major stakeholders and their operational scenarios: service, requirements, environment, enterprise, and county. The service ontology contains several components that can find and categorize public services through a case analysis of the public service export. Key attributes of the service ontology are composed of categories including objective, requirements, activity, and service. The objective category, which has sub-attributes including operational body (organization) and user, acts as a reference to search and classify public services. The requirements category relates to the functional needs at a particular phase of system (service) design or operation. Sub-attributes of requirements are user, application, platform, architecture, and social overhead. The activity category represents business processes during the operation and maintenance phase. The activity category also has sub-attributes including facility, software, and project unit. The service category, with sub-attributes such as target, time, and place, acts as a reference to sort and classify the public services. The requirements ontology is derived from the basic and common components of public services and target countries. The key attributes of the requirements ontology are business, technology, and constraints. Business requirements represent the needs of processes and activities for public service export; technology represents the technological requirements for the operation of public services; and constraints represent the business law, regulations, or cultural characteristics of the target country. The environment ontology is derived from case studies of target countries for public service operation. Key attributes of the environment ontology are user, requirements, and activity. A user includes stakeholders in public services, from citizens to operators and managers; the requirements attribute represents the managerial and physical needs during operation; the activity attribute represents business processes in detail. The enterprise ontology is introduced from a previous study, and its attributes are activity, organization, strategy, marketing, and time. The country ontology is derived from the demographic and geopolitical analysis of the target country, and its key attributes are economy, social infrastructure, law, regulation, customs, population, location, and development strategies. The priority list for target services for a certain country and/or the priority list for target countries for a certain public services are generated by a matching algorithm. These lists are used as input seeds to simulate the consortium partners, and government's policies and programs. In the simulation, the environmental differences between Korea and the target country can be customized through a gap analysis and work-flow optimization process. When the process gap between Korea and the target country is too large for a single corporation to cover, a consortium is considered an alternative choice, and various alternatives are derived from the capability index of enterprises. For financial packages, a mix of various foreign aid funds can be simulated during this stage. It is expected that the proposed ontology model and the business incubation platform can be used by various participants in the public service export market. It could be especially beneficial to small and medium businesses that have relatively fewer resources and experience with public service export. We also expect that the open and pervasive service architecture in a digital business ecosystem will help stakeholders find new opportunities through information sharing and collaboration on business processes.