• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.369-379
• /
• 2011

During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.222-230
• /
• 2009

A sensor network is an important element of the ubiquitous and it consists of sensor fields that contain sensor nodes and sink nodes that collect data from sensor nodes. Since each sensor node has limited resources, one of the important issues covered in the past sensor network studies has been maximizing the usage of limited energy to extend network lifetime. However, most studies have only considered fixed sink nodes, which created various problems for cases with multiple mobile sink nodes. Accordingly, while maintaining routes to mobile sink nodes, this study aims to deploy the hybrid communication mode that combines single and multi-hop modes for intra-cluster and inter-cluster transmission to resolve the problem of failed data transmission to mobile sink nodes caused by disconnected routes. Furthermore, a 2-level hierarchical routing protocol was used to reduce the number of sensor nodes participating in data transmission, and cross-shape trajectory forwarding was employed in packet transmission to provide an efficient data dissemination method.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.167-178
• /
• 2011

As the growth of ubiquitous services, various types of ad hoc networks have emerged. In particular, wireless sensor networks (WSN) and mobile ad hoc networks (MANET) are widely known ad hoc networks, but there are also other kinds of wireless ad hoc networks in which the characteristics of the aforementioned two network types are mixed together. This paper proposes a variant of the Low Energy Adaptive Cluster Hierarchy (LEACH) routing protocol modified to be suitable in such a combined network environment. That is, the proposed routing protocol provides node detection and route discovery/maintenance in a network with a large number of mobile sensor nodes, while preserving node mobility, network connectivity, and energy efficiency. The proposed routing protocol is implemented with a multi-hop multi-path algorithm, a topology reconfiguration technique using node movement estimation and vibration sensors, and an efficient path selection and data transmission technique for a great many moving nodes. In the experiments, the performance of the proposed protocol is demonstrated by comparing it to the conventional LEACH protocol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.110-118
• /
• 2007

In multi-hop wireless network, multi-channel makes it possible to enhance network performance because it reduces channel interferences md contentions. Recently several schemes have been proposed in the literatures to use multi-channel. Especially, MCR(Multi channel routing protocol), which utilize hybrid interface assignment, is a prominent routing protocol. MCR uses simple way to change channel but efficiently reduce channel interferences. In this paper, we propose a load-aware channel selection algorithm called LCS that enhances the channel switching algerian used in MCR protocol. In LCS, channel of a node is assigned based on collected information about queue length of neighbors. Moreover this paper evaluates the performance of in by using simulation test and testbed demonstration. Test results show that the MCR with LCS outperforms the naive MCR.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.259-266
• /
• 2013

Since the wireless communications have a limited transmission, the devices just around a master node can exchange data. Though Bluetooth and Zigbee support ad hoc, they are not appropriate for real-time voice communications. In this paper, we present a TDMA-based relay protocol for several users to communicate simultaneously. The proposed protocol can relay data or voice to other nodes in real-time by the multi-hop transmission method using TDMA. And the proposed protocol improves the network performance by allocating different frequencies to the slaves depending on the routing path scheduled by the routing table. NS-2 simulation shows that the performance of the proposed protocol is good in terms of the transmission delay and pecket loss probability in the real-time voice transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1089-1096
• /
• 2019

Recently, small-scale IoT services using a small amount of information through low-performance computing have been spread. It requires low cost, low-power, and long-distance communication technologies with wide communication radius, relatively low power consumption. This paper proposes a MAC layer and routing protocol that supports multi-hop transmission in small-scale IoT environment distributed over a large area based on LoRa communication and delivering a small amount of sensing data. The terminal node is mobile and the communication type provides bidirectional transmission between the terminal node and the network application server. By applying the proposed protocol, a production line monitoring system for smart factory was implemented. It was confirmed that the basic monitoring functions are normally performed.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.77-85
• /
• 2015

Recently, wireless sensor network(WSN) have been used in various fields to implement ubiquitous computing environment. WSN uses small, low cost and low power sensors in order to collect information from the sensor field. This paper proposes a clustering algorithm for energy efficiency of sensor nodes. The proposed algorithm is based on conventional LEACH, the representative clustering protocol for WSN and it prolongs network and nodes life time using sleep technique and changable transmission mode. The nodes of the proposed algorithm first calculate their clustering participation value based on the distance to the neighbor nodes. The nodes located in high density area will have clustering participation value and it can turn to sleep mode. Besides, proposed algorithm can change transmission method from conventional single-hop transmission to multi-hop transmission according to the energy level of cluster head. Simulation results show that the proposed clustering algorithm outperforms conventional LEACH, especially non-uniformly deployed network.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.427-434
• /
• 2014

The Multihop Routing of vehicle communication environment is difficult to maintain due to heavy fluctuation of network topology and routing channel according to the movement of the vehicle, road property, vehicle distribution. We implemented GeoNetworking on the basis of ETSI(European Telecommunication Standard Institute) to maintain the vehicle safety service. GeoNetworking has its own way that delivers the data through the Unicast and Broadcast. In this paper, we compared performance index such as packet delivery ratio, end-to-end delay about GeoNetworking using the QualNet Network Simulator. Previous research assessed performance of GeoUnicast. This research has been additionally performed about GeoBroadcast, and we progressed algorithm performance through the comparison of CBF(Contention based Forwarding) of GeoUnicast with Greedy forwarding of GeoBroadcast.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.118-126
• /
• 2007

An ad hoc network is a system of wireless mobile nodes that dynamically self-organize in arbitrary and temporary network topologies allowing people and devices to internetwork without any preexisting communication infrastructure. Although ad hoc network is attractive solution, there are still some major flaws that prevent commercial growth. Security is one of these main barriers; ad hoc networks are known to be particularly vulnerable to security attack. It is difficult to establish a centralized key distribution center and a trusted certification authority to provide cryptographic keys and digital certificates to nodes. To prevent attacks in ad hoc routing protocols, many algorithms have been used. In this paper, we have depicted a secure framework for multipath routing in wireless multihop network, which is comprehensive solution for secure data forwarding in wireless multihop networks. With the simulation results, the proposed scheme is compared with existing source routing scheme.