• Title/Summary/Keyword: 멀티모드형

Search Result 58, Processing Time 0.037 seconds

Multipaction Sensitivity Analysis of X-band Output Filter for Geostationary Satellite (정지궤도위성 X-대역 출력필터 멀티팩션 민감도 해석)

  • Kim, Joong-Pyo;Lee, Sun-Ik;Lim, Won-Gyu;Kim, Sang-Goo;Lee, Sang-Kon
    • Journal of Satellite, Information and Communications
    • /
    • v.10 no.3
    • /
    • pp.131-136
    • /
    • 2015
  • In this paper, prior to the flight model X-band dual-mode circular cavity filter required for the high power transmission of the observation payload in the geostationary satellite, the development model are designed and analyzed to show the analytical multipactor requirement margin. First of all, the multipaction breakdown power sensitivities were analyzed by changing the iris width and thickness within the filter, and through that the iris width and thickness was selected and then the multipaction threshold powers over the frequencies within the bandwidth were analyzed and the required margin of 8 dB was obtained. Also for the high power transmission filter, another important phenomena known as corona breakdown are analyzed for the iris width and thickness changes. Finally the development model manufactured was tested and the results met the key requirements.

단말기에서의 SDR 기술

  • 김선영;강법주;김창주
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.3
    • /
    • pp.48-57
    • /
    • 1999
  • 안테나 단에서 직접 수신 신호의 디지털화가 이루어지고 그 해당 신호의 처리는 고속 디지털 신호처리기 내에서 소프트웨어로 수행되는 방식을 SWR(Software Radio)이라 한다. 그러나 현재의 기술 수준을 감안하여 보다 현실적인 SDR(Software Defined Radio) 정의가 필요하게 되었다. SDR이란 수신신호의 디지털화가 안테나 이하의 임의의 단(IF단)에서 이루어지는 무선으로 정의된다. 물론 A/D변환기등의 기술이 더욱 발전되면 궁극적으로는 SWR로 진화될 것이다. 그러면 SDR은 왜 필요한 것일까? 현재 사용중인 이동통신 단말기의 단점은 어느 한 표준 또는 방식에 종속되어 언제 어디서나 임의의 시스템에 접속되어 사용하기에는 많은 기술 종속적인 문제 및 제약을 내포하며, 사용방식에 따른 시스템의 유연성이 없고, 상용 서비스 도중에 발생되는 단말기 문제의 해결(recall service)이 어렵고, 많은 기술료를 지불해야 한다는 것이다. 부연하면 CDMA 셀룰라의 경우 퀄컴 등의 특정한 회사에 의해 기술이 폐쇠되어, 정보의 흐름이 자유스럽지 못할 뿐더러, 이로 인해 기술진화가 보다 빠르게 진행되지 못하고, 전세계적으로 많은 새로운 우수 제품의 출연에 제약이 가해진다는 것이다. 따라서 SDR(Software Defined Radion)을 도입, 하드웨어 및 소프트웨어를 개방형 구조(open architecture)로 개발한다면 정보의 흐름을 자유롭게 할 수 있고, 이로 인하여 세계적으로 다양한 신제품의 개발이 촉진되고 결과적으로 전세계 시장이 커지게 되는 일석이조의 효과를 얻을 수 있게 된다. 또한 이 같은 개방형 단말기 개발의 필요성은 최근 시장동향으로 볼 때, 기존의 단말기 회사 입장에서는 새로운 수익 모델이 필요한 시점이고, 또한 2002년경에 판매되는 단말기의 80%정도는 멀티모드타입 단말기일 것으로 예측되는 점, 그리고 금년말까지 100개 회사 이상이 SDR 포럼 멤버로 가입할 것으로 예측되는 점, 무선 인터넷 폭발적인 성장으로 복합 멀티미디어 단말기 시대가 다가오는 점 등으로 미루어 볼 때, 고객의 서비스 가치선택에 역점을 둔 기술을 중시해야 한다는 점에서 더욱 설득력을 지닌다. 따라서 이 같은 목적과 3세대 이동통신 및 인터넷 사용자의 증가, 반도체기술의 발전에 힘입어, 과거 군용 시스템에서 이용되던 SWR 기술을 상용시스템 특히 3세대 이동통신에 적용하려는 연구가 활발히 진행되고 있다. '96년 SDR 포럼이 결성되었는데, 목적은 휴대형 장치(hand-held devices), 기지국(base stations), 차량형 장치(mobile stations)를 포함하는 다중모드(multi-mode), 다중대역(multi-band) SDR을 위한 개방형 구조의 표준을 정하기 위함이다. 이 같이 public forum에 의한 표준(open architecture standard)이 정해지면 그 다음은 이를 어떻게 구현할 것인가가 문제가 될 것이다. 본고에서는 먼저 SDR 단말기 요구사항을 살펴보고, 이 요구사항들을 만족하는 SDR 단말기 구조, SDR 계층참조 모델, 그리고 기존의 단말기 구조와 SDR 계층참조 모델의 연관관계에 대해 살펴보고, 크게 두가지 종류의 단말기 즉 사용 SDR 단말기와 군용 SDR 단말기에 대해 살펴보고, 설계 절차 및 현재 시점에서 단말기 구현을 위해 해결해야 하는 기술적 과제를 살펴보고 결론을 언급한다.

  • PDF

Fast Game Encoder Based on Scene Descriptor for Gaming-on-Demand Service (주문형 게임 서비스를 위한 장면 기술자 기반 고속 게임 부호화기)

  • Jeon, Chan-Woong;Jo, Hyun-Ho;Sim, Dong-Gyu
    • Journal of Korea Multimedia Society
    • /
    • v.14 no.7
    • /
    • pp.849-857
    • /
    • 2011
  • Gaming on demand(GOD) makes people enjoy games by encoding and transmitting game screen at a server side, and decoding the video at a client side. In this paper, we propose a fast game video encoder for multiple users over network with low-powered devices. In the proposed system, the computational complexity of game encoders is reduced by using scene descriptors, which consists of an object motion vector, global motion, and scene change. With additional information from game engines, the proposed encoder does not need to perform various complexity processes such as motion estimation and ratedistortion optimization. The motion estimation and rate-distortion optimization skipped by scene descriptors. We found that the proposed method improved 192 % in terms of FPS, compared with x264 software. With partial assembly code, we also improved coding speed by 86 % in terms of FPS. We found that the proposed fast encoder could encode over 60 FPS for real-time GOD applications.

Embedded System Design of Automotive Media Server Platform with the MOST Interface (MOST 인터페이스를 갖는 차량용 미디어 서버 플랫폼에 대한 임베디드 시스템 설계)

  • Kwak, Jae-Min;Park, Pu-Sik
    • Journal of Advanced Navigation Technology
    • /
    • v.10 no.3
    • /
    • pp.262-267
    • /
    • 2006
  • For growing need for the multimedia application in the vehicles, the MOST protocol has been focused on. The MOST protocol supports three kinds of communication modes; short control message, asynchronous packets, and reserved synchronous stream data. Because of a variety of transportation, the MOST is suitable for various applications in vehicle environment. In this paper, we implemented embedded system which is MOST-enabled AMS platform and tested the network communication operation through the control port and the synchronous channel of the source port. We implemented the prototype platforms which communicate each other on the MOST's POF network. Moreover we implemented the DivX decoder attached AMS platform and verified the operation by transferring the video stream and the control messages through the MOST network.

  • PDF

A Design of an Embedded Microprocessor with Variable Length Instruction Mode (가변길이 명령어 모드를 갖는 Embedded Microprocessor의 설계)

  • 박기현;오민석;이광엽;한진호;김영수;배영환;조한진
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.4
    • /
    • pp.83-90
    • /
    • 2004
  • In this paper, we proposed a new instruction set(X32Y ISA) with 3 different types of instruction mode. The proposed instruction set organizes 32-bit, 24-bit, 16-bit instruction in order to solves a problem of memory size limitation in an embedded microprocessor. We designed a 32-bit 5 stage pipeline RISC microprocessor based on the X32V ISA. To verify the proposed the X32V ISA and a microprocessor, we estimated a program code size of multimedia application programs using a X32V simulator. In result, we verified that the Light mode and the Ultra Light mode obtains 8%, 27% reduction of a program code size through comparison with the Default mode. The proposed microprocessor was verified all X32V instructions execution at Xilinx FPGA with 33MHz operating frequency,

Multi Frequency Thin Film Loop Antenna for Multi-media Devices (멀티미디어단말기용 박막형 다중주파수 안테나)

  • Shin, Cheon-Woo
    • Journal of Korea Multimedia Society
    • /
    • v.12 no.9
    • /
    • pp.1288-1296
    • /
    • 2009
  • This paper is for multi-frequency thin film loop antenna used on smart phone, PMP and PDA like as a multi-media devices. We developed a loop pattern folding methods to reduce a thin film antenna dimension using that mutual coupling folding loop occurs the higher frequency resonation. To reduce the thin film size for loop antenna, we fold the loop pattern repeatedly control the coupling coefficient than generate a not only higher mode resonation but also basic resonation from loop pattern. To realization the thin film folded loop antenna, we used a $30mm{\times}9mm$ PI film the thickness is 20um so that we realize the CDMA850, GPS, DCS, PCS, WCDMA antenna simultaneously and it's radiation efficiency is over 50% and gain is 0dBi.

  • PDF

A Study on High-Power Handling Capability of X-Band Circular Waveguide Cavity Filter (X-대역 원통형 도파관 캐비티 필터의 고전력 핸들링 능력 연구)

  • Lee, Sun-Ik;Kim, Joong-Pyo;Lim, Won-Gyu;Kim, Sang-Goo;Lee, Pil-Yong;Jang, Jin-Baek
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.1
    • /
    • pp.49-60
    • /
    • 2017
  • In this paper, we presented the result of the study on high-power handling capability of the X-band circular waveguide cavity filter configured at the output of high power amplifier(120 W) for geostationary satellites. The dual mode circular waveguide cavity filter with 6th order is selected and the physical model of the filter is designed after determination of the size of resonator from mode chart. Multipactor margin analysis is performed by the SEM method and the VMF method. The result shows that the VMF method predicts lower multipactor breakdown thresholds than the SEM method. Evaluating the multipactor margin obtained by the VMF method to ECSS criteria, we could decide to perform multipactor test. The multipactor test conducted in ESA facility shows that multipactor did not occur even until the RF power increased up to 540 W. In consequence, by both analysis and test, we could verify that the X-band circular waveguide cavity filter has the sufficient high-power handling capability to operate on orbit.

Implementation of Integrated Receiver for Terrestrial/Cable/Satellite HD Broadcasting Services (유럽형 지상파/케이블/위성 멀티모드 HD 방송 수신이 가능한 통합 수신기 구현)

  • Lee, Youn-Sung;Kwon, Ki Won;Kim, Dong Ku
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.11
    • /
    • pp.2113-2120
    • /
    • 2015
  • This paper presents an integrated receiver to support multimode broadcasting standards such as DVB-T2, DVB-C2, and DVB-S2 in a single platform. The integrated receiver consists of a tuner block, a receiver engine, a frame processor, and an A/V decoder. The receiver engine includes a channel decoding engine and a demodulation engine to perform OFDM and APSK demodulations. The frame processor performs deinterleaving and BB frame decoding functions. The demodulator engine and the frame processor are implemented in two FPGA devices and DSP-based embedded software, respectively. To verify the functionality of the integrated receiver, it is tested in the laboratory. Commercial PC-based modulators are used to generate the DVB-T2, DVB-C2, and DVB-S2 modulated signals. The integrated receiver was tested under various operation modes as specified in the standards such as DVB-T2, DVB-C2, and DVB-S2 and showed successful operation in all the scenarios tested.

TCP Transmission Mode for the IEEE 802.15.3 High-rate WPAN (IEEE 802.15.3 High-rate WPAN을 위한 TCP 전송모드)

  • 이왕종;이승형;전영애
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.10c
    • /
    • pp.667-669
    • /
    • 2004
  • IEEE 802.15.3 High-Rate WPAN(Wireless Personal Area Network)은 TDMA방식을 사용하며 10m내외에서 멀티미디어와 같은 실시간, 대용량 데이터의 전송을 목적으로 한 기술이다. TDMA방식을 사용하는 기술은 디바이스들이 통신을 하기 전에 미리 채널시간을 할당받아야 한다. IEEE 002.15.3 High-Rate WPAN 환경에서 TCP stream을 전송할 경우 TCP ACK을 전송하기 위해 새로운 채널시간을 할당받아야 한다 송신단은 전송할 데이터와 할당받은 채널시간이 남아있더라도 TCP ACK을 수신할 때까지 아무런 전송도 할 수 없게 된다. 본 논문에서는 High-rate WPAN환경에서 TCP stream을 효과적으로 지원하기 위해 송신단이 할당받은 채널시간동안 송신단과 수신단이 충돌없이 채널을 사용하며 네트워크의 성능을 향상시키는 방법을 제안한다.

  • PDF

Optimal Design of Piezoelectric transformer for High Efficiency and High Power density using AWE (AWE를 이용한 고효율 고전력 밀도 압전 변압기의 최적설계)

  • Seo, Jung-Moo;Joo, Hyun-Woo;Jung, Hyun-Kyo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07b
    • /
    • pp.780-783
    • /
    • 2004
  • 본 논문에서는 유한요소법과 등가회로법을 이용하여 윤곽 진동형 압전변압기의 특성을 해석하고 이를 통해 압전변압기의 매칭 임피던스와 기계 및 전기적 결합계수를 계산하였다. 실험적 결과를 통하여 수치해석의 타당성을 검증한 후, 진화 전략에 기초한 멀티 모드 함수의 최적 알고리즘을 이용하여 고효율 고전압 밀도 압전 변압기의 형상 최적화를 수행하였다. 최적화 과정에서의 계산 시간을 단축시키기 위하여 AWE(Asymptotic Waveform Evaluation)를 적용한 유한요소법을 사용하였다.

  • PDF