• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.325-328
• /
• 2012

This paper intends to introduce foreign/ domestic situation on fire safety assessment of bed mattress. America continent countries and ISO recently adapt real scale test method, other coutries including Korea have been using small scale test method such as IMO FTP code's bed component fire test.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.329-332
• /
• 2012

This study focuses on the establishment of bed mattress fire test in real scale where it explains the burner heat supply, test procedure and test report in detail. Especially burner system is dealt in importance for bed mattress test in real scale due to simulating in bedding component by burner heat out-put.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.197-200
• /
• 2011

This study aims to inform of current situation related to fire safety performance regulation on bed mattress in domestic and foreign countries, and even to make a slight analysis report on heat release rate of bed mattress based on preliminary KICT study which has comparison data together with several items inside house.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.235-240
• /
• 2010

본 연구는 침대 매트리스를 초기 가연물로하여 소량의 인화성 액체를 사용한 방화 화재 특성에 관한 실험적 연구로서 인화성액체의 spill형태에 따른 가연물의 연소속도, 연소 Patterns의 분석과 동일한 공간 가연물에서 일반화재와 유류방화의 비교 실대 화재 실험 및 실험 현장에서 수거한 유류증거물의 인화성액체 종류별, 증거물의 상태에 따른 GC/Mass 분석 결과특성에 관한 연구이다.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.136-143
• /
• 2015

Poly(vinyl alcohol) (PVA) was grafted onto the multiwalled carbon nanotube (MWCNT) using ultrasound in water and modified MWCNT/PVA nanocomposite was prepared. Modified MWCNT had a good affinity with PVA matrix and showed improved dispersion state along with uniform properties. Therefore, the electrical percolation threshold was observed at 0.1 wt% MWCNT. 3.0 wt% modified MWCNT/PVA composite had 50% higher tensile strength, 430% higher elongation at break, and 100% greater modulus. Since the modified MWCNT acted as a nucleation agent, the crystallization temperature increased to $8.5^{\circ}C$ and the crystallinity increased to 11.5% at 5.0 wt% loading concentration.

• Fire Science and Engineering
• /
• v.10 no.4
• /
• pp.19-27
• /
• 1996

The objective of this research is to study on the upper layer temperature, interface height and flow regime in case of several furniture fires such as trashcan, chair, carpet, sofa, mattress and wardrobe as a fire starter in a residential room by performing the experimental studies. The upper layer temperature and the Interface height were relatively well agreed with the experimental results when the flow coefficient at the opening was 0.65-0.8 for the rectangular trashcan, 0.65-0.9 for the circular trashcan and chair, and 0.7-0.9 for the carpet, sofa, mattress and wardrobe. The interface heights for the seven furniture fires were around 1[m] maintaining steady state. However, at the time of the maximum temperature, the interface height was lowered to 0.25[m]-0.75[m] from the floor. The flow regime at the opening was filling and buoyant for the distributed fire, and for the concentrated fire it was filling and then quickly changed to flow, and the flow period was long. The descending speed of the interface height was proportioned to the inflammability of the furniture and the contact surface area with air. The time required to come down around 1[m] was within 1-3 minutes.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.173-180
• /
• 2024

The purpose of this study was to determine the accuracy of chest compression according to the patient body weight and the rescuer's weight when performing chest compression on a cardiac arrest patient that occurred on a home bed. From January 07 to January 19, 2023, 36 paramedic students from N and S universities who completed the KBLS provider curriculum of the Korea Cardiopulmonary Resuscitation Association were measured at the subject's knee position, the depth of the mattress being pressed by the weight of the manikin, and the depth of the mattress being pressed by the weight of the manikin were measured during continuous chest compression for 2 minutes. As a result of the study, if a child's cardiac arrest is found at home, the patient is moved to the floor to proceed with chest compression, and the first witness to find an adult cardiac arrest is recommended to proceed on the bed rather than force the patient under the bed to proceed with chest compression.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.524-530
• /
• 2007

This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn-on and turn-off times of switching devices, and on-state switching device voltage drop are modelled using PQR transformation and compensated using a reference power control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system. Experimental results are shown to illustrate the feasibility of the proposed strategy.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.118-126
• /
• 2007

A finite element simulation model was developed for the performance optimization of a closed type air-cell mattress used for the ulcer prevention. An H-model with material properties of human flesh and kinematic joints were used for the calculation of the body contact pressure. The material property of rubber air-cell was evaluated by tensile test of standard specimen. We evaluated the body contact pressure distribution after laying human model on the inflated air-cell mattress. It was found that the body contact pressure was dependent on cell height. but hardly affected by the thickness of the rubber in a cell.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1892-1896
• /
• 2010

최근 들어 치수 기능만을 위한 공학적 효율 위주의 하천관리 정책에서 벗어나 하천의 환경적 기능의 개선을 위한 생태하천으로의 복원사업이 이루어지고 있다. 치수적 안정성 확보를 위해 기 설치된 콘크리트 호안을 철거하는 대신에 복토후 식생매트리스 공법을 통한 자연친화적인 하천공법이 널리 사용되고 있다. 홍수로 부터 제방을 보호하기 위하여 일반적으로 제방 사면에 호안을 설치한다. 설계 홍수량의 규모가 작거나, 상대적으로 규모가 작은 하천에는 호안이 설치되어 있지 않는 경우도 있지만, 국내는 하천계획의 수립시 호안을 설치하는 것이 일반적이다. 그러나 이와 같은 자연친화적인 하천공법의 적절한 수리학적 기준이 제시되지 않아 홍수기 유실로 인한 경제적 손실이 자주 발생하고 있다. 따라서 본 연구에서는 직선수로에 친환경적인 호안을 설치하여 실험을 통하여 하천의 안정성을 살펴보았다.