• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2017

In order to evaluate a stress state of concrete according to the change of tensile force of prestressed beam, improved nonlinear resonant ultrasonic spectroscopy(NRUS) method is proposed. This technique is advantageous to evaluate the stress state in initial state because the method shows much higher sensitivity than existing linear ultrasonic methods. The NRUS technique measure a nonlinearity parameter, which is calculated from the resonant frequency shift of ultrasonic wave related to the medium state, and the result is also closely related to the stress state of concrete. In this study, the nonlinearity parameter was measured with the change of tensile force to verify the close relationship between the two factors, and the effect of repetitive load cycle on the change of nonlinearity parameter was analyzed. In addition, sensitivity comparison with the linear ultrasonic pulse velocity method was performed. Through the experimental results, the possibility of NRUS technique for the evaluation of stress state in prestressed beam was confirmed.

• Water for future
• /
• v.28 no.5
• /
• pp.129-140
• /
• 1995

In this study we derived steady-state relationships between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage through numerical experiments with Richards equation on a hillslope. Numerical experiments analyzed the sensitivity of topographic and soil hydraulic properties on steady-state relationships between surface saturation area and subsurface outflow. And the power law for the extent of surface saturation area was determined as a function of subsurface outflow or soil moisture storage.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.658_659
• /
• 2009

This paper deals with the numerical implementation of the material sensitivity analysis, which is used to efficiently determine an optimal electric current distribution on a ship hull by corrosion of ship. A material sensitivity formula for the forward problem formulated in terms of the equivalent current method is analytically derived. Then, the components of the adjoint system including the electric pseudo-source are thoroughly investigated in order to obtain the first-order gradient information of an objective function with respect to the electric current. The purposed method has been successfully applied to a model ship and the predicted result on the underwater electric field due to corrosion of ship have been compared to that computed by FNREMUS software.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.33-39
• /
• 2005

Complex permittivities of material in a wide bandwidth are measured by using an open-ended coaxial probe. To obtain a confident complex permittivity profile, the accuracy of measured reflection coefficients and the stability of the conversion model should be guaranteed in advance. In this paper, the sensitivity of our conversion model is analyzed by employing two instruments with different uncertainties. And various factors effected on the accuracy of measured reflection coefficients are investigated in experiment.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.205-208
• /
• 2001

기존 의료용 초음파 진단장치에 사용되고 있는 선형 배열 탐촉자를 대상으로, 과도음장의 전파특성을 해석하고, 음장 변화에 민감하게 영향을 미치는 구동 펄스의 형태 및 탐촉자의 요소의 크기(element width), 곡률반경(Radius of curvature), 초점길이(focal length) 등 구조적인 변화에 따른 과도음장 전파 특성의 변화 양상을 시뮬레이션을 통해 체계적으로 해석하였다. 나아가, 매질이 간, 근육, 지방 등의 생체 조직인 경우의 음장 변화 특성을 비교 분석하였다.

• The Korean Journal of Rheology
• /
• v.6 no.1
• /
• pp.49-59
• /
• 1994

높은 전기장 하에서 다분산, 비구형 실리카/실리콘 오일 현탁액의 전기유변 (electrorheological, ER)현상을 살펴 보았다. 전기유변유체는 전기장 방향으로 사슬구조를 형 성하는 특성을 보이며 이것이 유변물성의 향상에 기여하는 것으로 알려졌다. 동적(dynamic) 상태 실험에서 전기장 하의 실리카 현탁액은 매우낮은 임계변형율(${\gamma}$c =0.1%)이상에서 비선 형 점탄성을 보였다. 저장탄성계수(G＇)는 변형율 변화에 손실탄성계수(G＂)는 매질의 점도 에 더 민감한 의존성을 보였다. 또한 겉보기 항복응력은 입자의 부피분율과 전기장에$\Phi$1.9E1.4 의 의존성을 보였는데 부피분율에 대한 의존성이 큰 이유는 0.1 이상의 부피분율에서 복합 사슬 구조 내의 입자들 간의 상호 정전효과가 지배적으로 나타나기 때문이라고 생각된다. 정상상태 실험에서는 부피분율이 크거나 높은 전기장 하에서 전단속도가 0.1sec-1 정도 이하 로 감소함에 따라 전단응력이 급겨히 증가하는 현상을 보였다. 그러므로 본질적인 동적 항 복응력을 얻기 위해서는 매우 낮은 전단속도 영역의 특이한 응력거동을 고려해야한다. 큰 전단속도 하에서는 hydrodynamic interaction의 영향으로 전단속도의 증가에 따라 전단응력 이 증가하였다. 이같은 전단응력의 거동을 계단전단실험으로 확인하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.10a
• /
• pp.45-46
• /
• 1991

분리막 공정은 상변화를 일으키지 않기 때문에 장치비가 저렴하며, 열 및 화학적으로 민감한 물질, 특히 생체물질 등을 다루는데 적합하다. 또한 최종 생성물질을 정제하는 방법으로는 이온교환 크로마토그래피, 전기 영동 및 친화성 크로마토그래피(affinity chromatography)가 있다. 이중 친화성 크로마토그래피는 가장 선택적이고, 단일 장치로서 기존의 분리방법에 비해 약 1000배 가까이 정제할 수 있다. 본 실험에서는 트립신 억제제인 m-aminobenzamidine을 포함하고 있는 수용성 고분자를 제조하여 트립신을 선택적으로 분리하고자 하였으며, 본 연구 필요한 분리막은 막제조가 용이하며 비용이 저렴한 cellulose acetate막을 사용하였다. CA 막의 세공크기는 겔화매질의 에탄올 농도로 조절하였다. Casting 용액의 조성은 다음 표에 간략하게 나타내었다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.61-66
• /
• 2001

Defocused Fourier plane holograms are stored in disk-type holographic memories where thin recording media are used, the areal storage density per hologram and the intensity uniformity of the signal beam at the recording plane are studied. As the pixel pitch of the spatial light modulator that represents binary data increases, the storage density per hologram increases if exact Fourier holograms are stored. When defocused Fourier plane holograms are stored, however, we show that there exists an optimal pixel pitch that maximizes the area storage density per hologram in general, to increase the areal storage density per hologram, f/# of the Fourier transform lens that focuses the data image should be as small as possible. In this case, not only the intensity distribution at the recording plane but also the recording area becomes very sensitive to the degree of defocusing. Therefore, even if the exact Fourier plane holograms are stored, the defocusing effect owing to the medium thickness should be taken into account to achieve the maximal areal storage density per hologram.logram.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.827-834
• /
• 2003

In this paper, we implemented an optical information security system using computer generated hologram based on the principle of interference and BaTiO$_3$that is photorefractive material. First of all, we would generate binary phase hologram which can reconstruct the original image perfectly, and regard this hologram as the image to be encrypted. And then applying the interference rule to the hologram, encrypted and reference (fkey information) images are generated. In the decrypting process, we can get an interference intensity by interfering the reference image and the encrypted image in the Mach-Zehnder interferometer. and transforming interference intensity information into phase information using LCD(liquid crystal display) and finally recover original image by inverse Fourier transforming the phase information. In this process, the Intensity information generated by interference of two images is very sensitive to external vibrations. So, we get a stable interference using the characteristic of SPPCM(self pumped phase conjugate mirror) of BaTiO$_3$that is photorefractive material. The proposed method has an advantage of double image encryption by encrypting the hologram of the image instead of original image.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.165-171
• /
• 2017

The effect of the concentric solid tube inserted inside the vibrator on the sound field distribution was analyzed for the sound waves focused on the center axis in the fluid - filled cylindrical piezoelectric transducer. The sound waves radiated from the inside of the cylindrical piezoelectric vibrator are transmitted through the fluid medium and are reflected or transmitted on the wall surface of the solid tube, and are focused on the central axis. At this time, the sound field distribution centered on the acoustic tube varies depending on the acoustic impedance and the thickness of the solid tube. In order to theoretically analyze this, the transfer matrix for each medium is derived, and the sound pressure level at the center axis is theoretically analyzed. For the acrylic tube with various thicknesses, the changing trend in the sound pressure level measured on the central axis agrees well with the result of the theoretical analysis, and it confirmed that the sound pressure formed at the center changes very sensitively with the thickness of the solid tube.