• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.52-59
• /
• 2016

For almost of concrete structures by placing in cold weather, it is very important that the selection of curing method at early aged construction stage. The Exothermic curing method with hot wire and rapid hardening cement is used mostly to prevent the initial cracks and the strength decrease. Most of the construction sites, however, have not been applied to the optimal curing method caused by the simple approaches and the empirical judgements. Therefore, this paper has proposed a evaluation algorithm of the exothermic curing method for representing heating temperature, period, position of hot wire by analyzing the transient heat transfer solution. This has been implemented, moreover, using an object oriented programming language to develop structural analysis system taking account risk parameters. This system is composed of input module, database module, database store module, analysis module, and result generation module. Linkage interface between the central database and each of the related module is implemented by the visual c# concept. Graphic user interface and the relational database table are supported for user's convenience.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6504-6510
• /
• 2015

Horizontally curved I-girders are subjected to not only bending moments but also torsional moments. The torsional moment of the plate girder is addition of St. Venant torsion and non-uniform torsion. In the flange of I-shaped plate girder, a kind of open-section, the normal stresses is not distributed uniformly due to the non-uniform torsion. Because of that, one of compression flange tip can be yielded faster than the flange of general straight girder. In other words, the flange local buckling strength is decreased when the girder has initial curvature. In this paper, the numerical analysis is conducted to investigate the average stresses in flange for curved girders. The subtended angle and slenderness ratio are taken as parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.51-56
• /
• 2012

In order to reduce the complexity of HEVC, we propose a fast mode decision algorithm in depth videos. Since almost CU mode is decided as SKIP mode in depth-continuity regions, we design the algorithm using the property of depth videos. If cost of SKIP is smaller than the multiplication between the threshold for EarlySKIP and average cost of SKIP, EarlySKIP is performed. Otherwise, we calculate Inter $2N{\times}2N$. Then, if motion vector of Inter $2N{\times}2N$ is 0 and variance of CU is smaller than threshold for inter, we skip Inter $2N{\times}N$, Inter $N{\times}2N$. Experimental results show that our proposed algorithm reduces the encoding time from 39% to 82% with negligible PSNR loss and bitrate increase.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.193-206
• /
• 1993

An analytical model of undertow is presented in the surf zone. Each term of the derived governing equation is evaluated by the ordering methods. Then the turbulent normal stresses and the streaming velocity terms are neglected. The driving force of undertow is derived from the wave profile which is approximated by the 4th order Chebyshev polynomials. The three types of vertical distribution of eddy viscosity are assumed and the coefficient of eddy viscosity is decided from the new boundary condition. So the input parameters for the calculation of undertow become very simple. The theoretical solutions of the present model are compared with the various experimental results. This model shows a good agreement with the experimental results in the case of mild slope and linear type eddy viscosity.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.432-437
• /
• 1999

Pyrolysis of polyethylene was carried out in the stainless steel reactor of internal volume of $10cm^3$. Pyrolysis reactions were performed at temperature $390{\sim}450^{\circ}C$ and the pyrolysis products were collected separately as reaction products and gas products. The molecular weight distributions(MWDs) of each product were determined by HPLC-GPC and GC analysis. Distribution balance equation for MWDs of random and specific products were proposed to account for initiation-termination and propagation-depropagation, such as hydrogen abstraction, chain cleavage, coupling of polymer and radical. A separate chain-end scission process produces low molecular weight noncondensable gases(C1 through C5) of average molecular weight 38. Activation energies of the random-chain scission and chain-end scission rate parameters, respectively, were determined to be 35, 17 kcal/mole.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.531-544
• /
• 2012

This study suggested the parameter estimation method for given rainfall events to be properly expressed by the beta distribution. For this purpose, this study compared the characteristics of probability density function with the parameter proposed considering the cases with and without addition to the rainfall peak, and the cases of using the real hyetograph and the rearranged hyetograph about the rainfall peak. As an example, this study analyzed the independent rainfall events at Seoul in 2010 and the annual maximum independent rainfall events from 1961 to 2010. The results derived are as follows. First, this study confirmed the necessity of additional consideration on rainfall peak to mimic the real hyetograph of rainfall events by the beta distribution. Second, this study confirmed the case of using rearranged hyetograph about the rainfall peak derived a better beta distribution to well mimic the characteristics of real rainfall than the case using the real hyetograph.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.663-669
• /
• 2009

The purpose of this study was to investigate the functional role of foot effectiveness when humans execute running turn maneuvers. Foot rotation angle at the starting turn and body angle at the vertical axis were analyzed through three-dimensional image analysis and ground reaction force analysis. Then, we created a simple equation: foot effectiveness = total foot rotation angle/total body rotation angle at the vertical axis. This equation made it possible to explain the dynamics of angular running turns. We analyzed data from running turns(0, 30, and 60) at average initial running velocities of 4.5, as well as rotations around the vertical axis during the running turns. As a result, the stance time, foot placement, and left and right force increased.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.599-607
• /
• 2004

As buildings become more high-rise and lightweight in recent years, steel has been utilized more frequently. Based on the American AISC standard, all axial loads could be carried through a bearing load in a column splice, but according to Korean codes, the bearing load has constrained the stress that could be carried by only 25% of all axial loads. Thus, new column splice methods that use metal touch have been examined. In this study, the stress path mechanism, as an intermediation parameter in the gap's magnitude, must be determined. Similarly, the behavioral aspect of the metal touch connection must be sought after comparing and analyzing the results of the test.

• Journal of Korea Water Resources Association
• /
• v.44 no.3
• /
• pp.189-198
• /
• 2011

The aim of this study is to compare k-$\varepsilon$ and k-$\omega$ closures under the condition of oscillatory layer flow at high Reynolds number. A one dimensional vertical model incorporated with flow momentum equations and turbulence models (k-$\varepsilon$ and k-$\omega$) is applied to the laboratory measurements in the turbulent oscillatory boundary layer. The numerical simulation reveals that both turbulence models calculate similar velocity profiles and turbulent kinetic energy (TKE). In addition, both deliver high accuracy under the condition of negligible spanwise pressure gradient. Therefore, it is recommended in this study to use k-$\varepsilon$ closure, of which numerical coefficients have been calibrated from many studies, for the cases of straight channel, estuary, and coastal environment where the spanwise pressure gradient is not significant.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.165-181
• /
• 2009

This paper presents an effective representation scheme for the shape analysis of the hippocampal structure and a stereoscopic-haptic environment to enhance sense of realism. The parametric model and the 3D skeleton represent various types of hippocampal shapes and they are stored in the Octree data structure. So they can be used for the interactive shape analysis. And the 3D skeleton-based pose normalization allows us to align a position and an orientation of the 3D hippocampal models constructed from multimodal medical imaging data. We also have trained Support Vector Machine (SVM) for classifying between the normal controls and epileptic patients. Results suggest that the presented representation scheme provides various level of shape representation and the SVM can be a useful classifier in analyzing the shape differences between two groups. A stereoscopic-haptic virtual environment combining an auto-stereoscopic display with a force-feedback (or haptic) device takes an advantage of 3D applications for medicine because it improves space and depth perception.