• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.366-368
• /
• 2021

최근 프로그램은 그 크기와 복잡도가 나날이 증가하고 있어, 프로그램 행위 모델링에 대한 중요성은 다양한 분야에서 증대되고 있다. 프로그램의 동적 분석은 런타임에 생성되는 데이터가 너무나 많아, 많은 데이터를 활용하기 용이한 딥러닝 기술이 사용되고 있다. 하지만, 기존의 연구들은 연산과 연산의 매개변수 중 매개변수에 대한 고려가 충분치 않았다. 이는 매개변수가 딥러닝에 알맞은 입력으로 표현되기 어렵기 때문인데, 우리는 이를 해결하기 위해 매개변수로 인해 발생되는 런타임 행위에서 특징적인 값들을 추출하는 것으로 대체하였다. 또한, 연산과 특징적인 값들이 여러 개의 LSTM-RNN 으로 처리됨을 보이고, 이 결과를 시각화 하여 효과적임을 보였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.421-427
• /
• 2005

A closed-loop sensorless stroke control system for a linear compressor has been designed. The motor parameters are identified as a function of the piston position and the motor current. They are stored in ROM table and used later for the accurate estimation of piston position. Also it was attempted to approximate the identified motor parameters to the 2nd-order surface functions. Some experimental results are given in order to show the feasibility of the proposed control schemes for linear compressors.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.19-24
• /
• 1995

The maximum entropy method is a well-known parametric estimation method of the power spectrum with high-resolution for short-time signals. Although a parametric estimation method for the bispectrum was proposed in recent years, it is not easy to estimate the bispectrum with high resolution for relatively short-time signals of which the total length is about 1000 data points. In this paper, a bispectrum estimation method is proposed to estimate the high-resolution bispectrum even for the relatively short-time signals.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1295-1304
• /
• 2021

For the efficient use and management of water resources, a reliable rainfall-runoff analysis is necessary. Still, continuous hydrological data and rainfall-runoff data are insufficient to secure through measurements and models. In particular, as part of the reasonable improvement of a rainfall-runoff model in the case of an ungauged watershed, regionalization is being used to transfer the parameters necessary for the model application to the ungauged watershed. In this study, the GR4J model was selected, and the SCEM-UA method was used to optimize parameters. The rainfall-runoff model for the analysis of the correlation between watershed characteristics and parameters obtained through the model was regionalized by the Copula function, and rainfall-runoff analysis with the regionalized parameters was performed on the ungauged watershed. In the process, the intermediate state variables of the rainfall-runoff model were extracted, and the correlation analysis between water level and the ground water level was investigated. Furthermore, in the process of rainfall-runoff analysis, the Standardized State variable Drought Index (SSDI) was calculated by calculating and indexing the state variables of the GR4J model. and the calculated SSDI was compared with the standardized Precipitation index (SPI), and the hydrological suitability evaluation of the drought index was performed to confirm the possibility of drought monitoring and application in the ungauged watershed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.361-373
• /
• 2010

Bridges constructed without any expansion joint or bridge bearing are called integral abutment bridges. They integrate the substructure and the superstructure. Possible deformation of the superstructure, due to changes in temperature for example, is prevented by the bending of the piles placed at the lower part of the abutment. This study examines the behavior of integral abutment bridges through soil-pile interaction modeling method and proposes an appropriate modeling method. Also, it assesses the behavior characteristics of the superstructure and piles of integral abutment bridges through parametric study. Soil condition around the pile, abutment height, and pile length were selected as parameters to be analyzed. Structural analysis was conducted while considering the interactions of soil-pile and temperature change-earth pressure on the abutment. Comparative behavior analysis through soil-pile interaction modeling showed that elastic soil spring method is more appropriate in evaluating the behavior of integral abutment bridges. The parametric study showed the tendency that as the soil stiffness around the pile increases, the moment imposed on the superstructure increases, and the displacement of the piles decreases. In addition, it was observed that as the bridge height increases, the earth pressure on the abutment increases and that in turn affects the behavior of the superstructure and piles. Also, as the length of the pile increased, the integral bridge showed more flexible behavior.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.212-212
• /
• 2011

댐 저수지와 같은 대형 저수지는 댐에 의해 만들어진 공간에 홍수를 저류하여 지체 방류함으로서 홍수저감효과를 얻는다. 이러한 홍수저감효과는 저류용량(storage capacity)에 의존적이며, 궁극적으로 저수지의 저류량-유출량 곡선으로 정량화 된다. 저수지의 저류량-유출량 관계곡선은 저수지 홍수추적에 사용되며, 이 곡선의 특성이 저수지 하류 유역에 대한 홍수추적 결과에 큰 영향을 미치게 된다. 일반적으로 저수지 홍수추적의 경우에는 선형저수지 이론이 적용되지 않는다. 일반적인 댐 저수지의 특성은 수심()의 증가에 따른 저류량()의 증가가 유출량()의 증가보다 훨씬 크게 나타난다. 따라서 저류량과 유출량간의 관계를 비선형 함수의 형태로 가정할 수 있다. 비선형저수지 모형의 경우에도 선형저수지 모형에서와 동일한 개념을 적용하여 저수지 홍수추적의 지체 및 저류특성을 유도할 수 있다. 결과적으로 지수함수 형태를 고려한 비선형 함수의 변곡점은 원점으로 나타나 선형저수지 모형에서와 동일하게 지체효과는 없는 것으로 파악되었다. 또한 저류효과는 수치적인 방법을 이용하여 해석하였으며, 변곡점의 위치를 확인하고 아울러 저류상수를 계산하였다. 결과적으로 변곡점의 위치는 고려한 모든 경우에 대해 원점으로 나타났고, 저류상수는 비선형저수지 모형의 매개변수에 관계없이 일정한 값으로 수렴함을 확인할 수 있었다. 즉, 저류상수는 비선형 함수의 매개변수인 와 비교하여 약 72% 증가된 값으로 수렴하는 형태임을 의미한다. 결과적으로, 본 연구에서는 비선형 저수지 모형을 제안하고, 이를 이용하여 저수지의 저류특성을 이론적으로 검토하였다. 먼저, 저수지의 저류량-유출량 관계를 지수함수 형태인 비선형 저수지 모형을 도입하여 정량화하였다. 또한 저수지의 저류특성은 저류상수로 정량화할 수 있으며, 저류상수는 비선형 저수지 모형의 매개변수를 이용하여 쉽게 결정할 수 있음을 확인하였다.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.189-198
• /
• 1995

The conventional finite element formulations for incompressible materials show pressure oscillations or pressure modes in four-node quadrilateral elements of commonly used displacement and pressure interpolations. The criterion for the stability in the pressure solution is the so-called Babugka-Brezzi stability condition, and the above elements do not satisfy this condition. In this study, a pressure continuity residual based on the pressure discontinuity at element interfaces is used to study the stabilization of pressure solutions in bilinear displacement-constant pressure four-node quadrilateral elements. This pressure residual is implemented in Q1P0 element derived from the conventional incompressible elasticity. The pressure solutions can be stable with the pressure residual though they exhibit sensitivity to the stabilization parameters. Parametric study for the solution stabilization is also discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.204-206
• /
• 2021

Real-time drilling parameters prediction is a considerably important study from the viewpoint of maximizing drilling efficiency. Among the methods of maximizing drilling, the method of improving the drilling speed is common, which is related to the rate of penetration, drillstring rotational speed, weight on bit, and drilling mud flow rate. This study proposes a method of predicting the drilling rate, one of the real-time drilling parameters, using a recurrent neural network-based deep learning model, and compares the existing physical-based drilling rate prediction model with a prediction model using deep learning.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.147-175
• /
• 2020

This study analyzed the effects that digital experience factors influence on purchase intention and the purchase. The study targeted an online shopping mall with a strong digital experience value among industries. The research model was derived by adding variables to independent and mediating variables according to the industry context of online shopping which is based on the theoretical background and previous studies. Product variety, price efficiency, convenience and conversation were used by terms of digital marketing mix as independent variables. Personalization has been very important factor in online shopping malls, and therefore added as a independent variable. Flow has been added as a mediating variable. Purchase and purchase intention has been used as dependent variables. For empirical testing of established research models and generalization of research results, research was conducted on online shopping malls where digital experiences are important. To do this, a survey was conducted for existing users of online shopping malls. In hypothesis testing, the hypothesis was established that product diversity, price efficiency, convenience, conversation and personalization influenced the intention to purchase online shopping. In particular, the product diversity and conversation variable were tested as the most influential factors on purchase intention. For price efficiency and personalization there were no statistically significant effect. Flow has been shown to be a partial mediator between Product variety and purchase intention in online shopping. In particular, in the case of personalization, it was tested to have a significant influence on purchase intention only when there was a flow experience called pleasure and immersion. This is because the flow experience of pleasure and immersion has played a full mediating role and significantly has affected the purchase intention, because the consumers themselves have to carry out the overall purchase journey without human help due to the nature of online. In the digital experience economy, since consumers are mostly digital consumers, where communication and sharing are the basics, they have been conducting digital word-of-mouth communication and sharing naturally before purchasing. Based on these results, theoretical and practical implications were suggested.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1993.10a
• /
• pp.25-25
• /
• 1993