• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.4
• /
• pp.7-15
• /
• 2008

In manufacturing aircraft, safety and lightness of structure are important factors. Utilizing autofrettage technique, these benefits can be obtained. This technique is most frequently applied to a single cylinder. However, the Bauschinger effect reduces the benefits of autofrettage process Therefore, there is increasing interest in the use of compound cylinder that combine shrink fit and autofrettage. In this paper, single and compound cylinders that has same geometry were considered. It was found that compound cylinder which was autofrettaged has lower tangential hoop stress and plastic strain than single cylinder at bore. This means a reduction in the impact of the Bauschinger effect after shrink-fitting which produces the beneficial bore hoop stress.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.110-117
• /
• 2018

The development of prosthetic hand or prosthetic leg equipment is steadily taking place globally. Though it would be difficult to create or feel the same way as a human hand, it would be a great for the amputated person if they can pick things up or do some movement as they want. It has become possible to develop low-cost prosthetic hand according to development of 3D printing technology. If people can develop personalized prosthetic equipment at similar prices to meet this trend, the utilization and penetration rate will be much higher. In this study, it describes how to develop a user-customizable prosthetic hand using 3D printing. To do this, the transformational parameters of prosthetic hand shape modeling are extracted as variability values, and the functions for controlling prosthetic hand motion are designed as software design patterns. This allows people who need a prosthetic hand to have their own prosthetic hand at a fast and affordable price.

• Prospectives of Industrial Chemistry
• /
• v.23 no.2
• /
• pp.23-39
• /
• 2020

4차 산업혁명의 초연결/초지능 사회가 현실화 되면서 모든 제품이 배터리에 연결되는 사물배터리(battery of things) 시대가 열리고 있다. 이에 따라 기존의 정형화된 에너지 저장 장치를 넘어 전자기기 각각에 걸맞은 스펙과 기능을 갖는 맞춤형 전지 개발이 화두이다. 특히 구부러지거나 변형될 수 있는 웨어러블 전자기기를 구동하기 위해서는 기계적인 변형에 안정한 에너지 저장 장치가 필요하다. 또한 다양한 기능(투명성, 전기변색, 자가치유형, 친환경 등)을 갖는 지능형 전자기기가 개발됨에 따라, 이와 동등한 기능을 갖는 에너지 저장 장치도 요구되고 있다. 나아가 각각 개발된 웨어러블/다기능성 전자기기와 에너지 저장 장치를 어떻게 통합시킬지에 대한 연구도 활발히 이루어지고 있다. 본 기고문에서는 기계적 안정성, 기존 소자와의 적합성, 나아가 신기능성까지 갖춘 차세대 다기능성 웨어러블 에너지 저장 장치를 소개하고 이를 위한 복합나노구조 합성 및 소자 디자인 전략에 관한 최근 연구 동향을 소개하고자 한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.238-241
• /
• 2008

A brake system in automobile is one of the important parts that directly affect the safety of passengers. Particularly, disk brake module is applied to almost all kinds of automobile brake system due to its remarkable braking power and braking distance. In the disk brake module of an automobile, the bolt for tire wheel is assembled to the disk brake hub by interference fit (bolt pressing process). The process induces small deformation whose range is within tens of ${\mu}m$ and this deformation may cause the runout badness of the whole disk brake module, and even braking problems such as judder or squeal phenomena which makes the loss of braking efficiency. In this study, bolt pressing fit into hub was simulated by $ANSYS^{TM}$, a commercial structure analysis program. Also, the aspect and the cause of hub displacement were analyzed and the solution for decreasing runout of hub was proposed.

• Journal of the Korean Society for Library and Information Science
• /
• v.44 no.2
• /
• pp.29-50
• /
• 2010

The purpose of this study presents a model of the integrated online library service with LMS (Learning Management System). The new library service is called 'Library on Blackboard' which was developed and implemented by Murray State University Libraries in Murray, Kentucky, USA. This user-centered service with applied information technology has the potential to enhance the quality of the library performance in university libraries. The introduction of the Learning Management System in South Korea has a potential to enhance the education environment and promote new library services. With the emergence of new information technologies and growing popularity in online classes and distance education programs, the importance and usage of Learning Management Systems in higher education has increased.

• Journal of Industrial Convergence
• /
• v.20 no.3
• /
• pp.41-46
• /
• 2022

This paper proposes a consumer-tailored solution to prevent the forgery and falsification of data by incorporating blockchain technology in the online and offline distribution of agricultural produce. The solution provides customized services to consumers based on an analysis of the data generated from the sales, distribution, and consumption of quality of the produce. It can also ensure the safety and credibility of the produce, and allow producers to identify consumption intent and the flow of distribution. Producers will be able to determine the flow of produce based on the data collected and thus tailor promotional efforts. This is expected to be the fourth industrial revolution in the agricultural produce distribution sector. Utilizing blockchain and big data technology to create integrated record management systems that combine multiple solutions will shape future technology trends. In addition, if eco-friendly certification is acknowledged as a valuable service and can be incorporated into the distribution process, this solution could become a one-stop distribution solution for agricultural produce.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2011

Several theoretical soil nonlinear models to predict damping ratio, which is one of the typical dynamic properties of soils, it is impractical to predict damping ratio. The resonant column and torsional shear test(RC-TS) is used to represent the dynamic behavior of soils from intermediate to medium shear strains. A limitation of RC-TS is measure precise shear strain in large strains and the modified equivalent radius($R_{eq}$) was obtained using both modified hyperbolic model and Ramberg-Osgood model. Bonneville clays were tested using RC-TS test to obtain rotation and torque. The measured rotation and torque were then compared with calculated rotation and torque using curve-fitting method. Then, the nonlinear soil model parameters were obtained and the equivalent radius was calculated using the model parameters.

• Journal of the Korean Society of Radiology
• /
• v.18 no.4
• /
• pp.327-334
• /
• 2024

The purpose of this study is to develop a customized foot disease analysis and management system for diabetic patients to prevent foot ulcers in diabetic foot disease patients. This system utilizes image analysis technology to measure not only foot pressure, but also ankle deformation, body balance, and foot wounds. Through various data, it is possible to accurately analyze the state of foot deformation, and based on this, the exact state of deformation of the foot of a patient with diabetic foot disease was identified and a customized insole was produced. This study was conducted to examine the satisfaction level of using an application that checks the status of diabetic foot disease wounds and to identify the degenerative status of diabetic foot disease patients and foot disease patients by wearing customized insoles and to survey the satisfaction of wearing insoles. As a result of the study, the knee angle measured for plantar pressure was -0.8 ± 1.3 degrees and ranged from a minimum of -2.4 degrees to a maximum of 1.1 degrees, and there was no significant difference in valgus knee between both lower extremities (p = 0.534). There was a significant difference in tibial angle between both lower extremities (p < 0.001). Ankle angle on the left side was 2.6 ± 2.0 degrees, ranging from a minimum of 0 degrees to a maximum of 6.3 degrees, and on the right, it was 4.5 ± 2.1 degrees, with a distribution of minimum 1.5 degrees to a maximum of 9.1 degrees. There was a significant difference in ankle angle between both lower extremities (p = 0.011). They responded that they felt an average of 4.3 points of satisfaction with the plantar pressure measurement application. Respondents responded that they felt an average of 3.9 points of satisfaction with the use of customized insoles.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.49-53
• /
• 2009

In this paper, we compared wheelchair seating system between wheelchair users with cerebral palsy and spinal cord injuries. Wheelchair seating system is divided into three parts, seating components, seating cushion, and special functions. Seating components are composed of 10 sections, such as headrest, footrest, etc. There are 4 seating cushions including gel, form, hybrid, and air. Also leg elevation, seat elevation, tilt-in-space, reclining, and standing are special function of the wheelchair. There are 10 wheelchair users, 5 with celebral palsy, and 5 with spinal cord injuries who have participated in this study. 10 wheelchair users have been customers of rehabilitation technology center in national rehabilitation center. On the result, SCI group mostly uses headrest, and Humeral blocks (seating components), air cushion (seating cushion), and tilt in space, reclining (special functions). On the other hand, CP group uses adductor, abductor, and pommel (seating components), form cushion (seating cushion), and some of CP group uses reclining (special functions)

• Transactions of Materials Processing
• /
• v.17 no.6
• /
• pp.407-411
• /
• 2008

A brake system in automobile is one of the important parts that directly affect the safety of passengers. Particularly, disk brake module is applied to almost all kinds of automobile brake system due to its remarkable braking power and braking distance. In the disk brake module of an automobile, the bolt for tire wheel is assembled to the disk brake hub by interference fit(bolt pressing process). The process induces small deformation whose range is within tens of ${\mu}m$ and this deformation may cause the runout badness of the whole disk brake module, and even braking problems such as judder or squeal phenomena which makes the loss of braking efficiency. In this study, bolt pressing fit into hub was simulated by $ANSYS^{TM}$, a commercial structure analysis program. Also, the aspect and the cause of hub displacement were analyzed and the solution for decreasing runout of hub was proposed.