• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.561-572
• /
• 2010

This paper is a study about application of recently proposed Performance Based Mixture Design (PBMD) for design of high strength concrete (HSC) to obtain HSC mix proportion that satisfies required performances. The PBMD method which uses Satisfaction curve based on a Bayesian method is a performance oriented concrete mix proportion design procedure easily applicable to any condition and environment for a possible replacement to the current prescriptive design standards. Based on extensive experimental results obtained for various materials and performance parameters of HSC, the application feasibility of the developed PBMD procedure for HSC has been verified. Also, the proposed PBMD procedure has been used to perform application examples to obtain desired target performances of HSC with optimum concrete mixture proportions using locally available materials, local environmental conditions, and available concrete production technologies. The validity and precision of HSC mix proportion design obtained using the PBMD method is verified with the experimental and ACI presented results to check the feasibility for actual design usage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.345-353
• /
• 2020

On conventional railway lines, trains with different speeds are operated. Therefore, trains moving on curved sections with cants must accept various ranges of balanced cants, cant deficiency, and cant excess, which is essential for the comfort and safety of train operation. In this study, the correlation between the curve radius, cant, and train speed on a track was analyzed to check the cant range that satisfies the criteria of train types, operation speed, cant deficiency, and cant excess. Also, the range of setting the cant by the curve radius and balanced cant were calculated by a regression analysis of train speed according to the frequency of operation in the case of mixed trains. The results could make it possible to improve the speed of the operation route, reduce the loss of ride quality, reduce the risk of derailing caused by cant deficiency, and minimize the load deflection by excess cant. This will ensure the safety of trains running on curves and improve the efficiency of track maintenance.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.264-265
• /
• 2008

본 연구에서는 건물공사에 사용되는 CAD 도면자료를 공간데이터로 변환하기 위한 과정의 일환으로 수치지도 작성내규에 근거한 선형단순화 기법을 제안하였다. 이 기법은 외곽선의 절점들이 수치지도 작성내규의 곡선데이터 점간거리 규정에 만족할 때까지 반복적으로 절점의 구간을 늘려나가는 방식이다. 제안된 기법의 단순화효과를 비교하기 위하여 Douglas-Peucker 알고리듬 등 가장 흔히 사용되는 4개의 선형 단순화기법을 동일한 건물 외곽선에 적용하여 수치지도작성 내규 만족도, 절점수, 선길이, 면적에 대해 비교, 분석하였다. 분석결과 제안된 알고리듬의 경우 수치지도 내규 만족도 면에서 100%에 가까운 만족도를 보였으며 절점수를 효율적으로 줄이면서, 선길이, 면적의 측면에서도 다른 알고리듬들에 비해 거의 손실이 발생하지 않아 추후 건설도면의 변환에 유용하게 사용될 가능성이 높을 것으로 판단된다.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.135-143
• /
• 2008

According to the present highway design criteria, there are minimum standards which re ade from special design speeds. If some highways are satisfied the standards, it regards he highway as safety. In reality, however, most drivers drive a car at different speed compared with design speed. It is very dangerous for drivers especially at transition sections between curve and horizontal curve sections. Hence, this study calculated the rate of changing and horizontal acceleration at each section. Moreover, this study evaluated thesafety of design at curve transition sections and then calculated lateral acceleration and curve radii. This study found the minimum standards which are using as basic safety standards are not appropriate for measuring driver's safety.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.117-125
• /
• 2012

Although many studies have been conducted to extract buildings from airborne lidar data, most of them assume that all the boundaries of a building are straight line segments. This makes it difficult to model building boundaries containing curved segments correctly. This paper aims to model buildings containing curved segments as combination of straight lines and arcs. First, two sets of boundary points are extracted by adaptive convex hull algorithm and local convex hull algorithm with a larger radius. Then, arc segments are determined by average spacing of boundary points and intersection ratio of perpendicular lines. Finally, building boundary is modeled through regularization of least squares line or circle fitting. The experimental results showed that the proposed method can model the curved building boundaries as arc segments correctly by completeness of 69% and correctness of 100%. The approach will be utilized effectively to create automatically digital map that meets the conditions of the Korean digital mapping.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.314-314
• /
• 2011

강변저류지는 하천변에 위치한, off-line 형 치수구조물로 하천의 수위 변화에 따라 저류량이 변한다. 그러므로 강변저류지의 홍수조절효과는 부정류 흐름 상태를 재현하여 모의해야 한다. 현재 국내에는 강변저류지 홍수조절효과 분석을 위해 주로 1차원 부정류 수치모형인 HEC-RAS를 사용하고 있다. 하지만 1차원 부정류 계산 결과에 대한 정확도 검증 없이 사용되고 있다. 따라서 이를 검증하고 보완할 수 있는 부정류 수리실험이 필요하다. 이에 본 연구에서는 상류 유입수문곡선을 재현할 수 있는 부정류 유량조절장치를 개발하였으며, 개발된 유량조절장치의 재현 능력을 검증하고 강변저류지 홍수조절효과 분석에 대한 적용 가능성을 확인하였다. 부정류 수리실험은 정규분포형 수문곡선과 이중 첨두를 가지는 수문곡선 및 다양한 첨두 지속시간을 갖는 수문곡선 형태에 대해 유량조절장치의 재현 능력을 검토하였다. 검토 결과 개발된 유량조절장치의 재현 수문곡선은 첨두 홍수량을 기준으로 약 1 % 이내의 오차를 보여 매우 만족스러운 결과를 얻었다. 향후 강변저류지의 홍수 조절효과 분석에 사용한다면 좀 더 현실적이고 정량적인 치수능력 평가가 될 수 있을 것이라 판단된다.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.2
• /
• pp.233-241
• /
• 1997

New UBV Photometric observations for a close binary RZ Cas were obtained at the Chungbuk National University Observatory for 42 nights from October 1991 to March 1993, and standardized UBV light curves were constructed. From the primary light curves, the eight minimum times were determined by using a new light element. We confirmed the primary minimum was totality and derived the average duration was 18.1 minutes corresponding to $0.^{p}01$. The photometric and spectroscopic solutions were calculated with the obtained light curves and the radial velocity curves of Duerbeck & Hanel(1979) by using Wilson-Devinney method. From these values, the absolute dimensions of this binary system were estimated.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.24-29
• /
• 1993

This paper describes a method for generating an initial hull form by using form parameters. As a mathematical representation of curves, B-spline curves are used as well as the polynomials used by Durand et al. The five basic control curves and the centerline contour are defined to give the boundary conditions for body plan by using above mentioned mathematical models. From these curves body plan is determined. Two additional curves which are concerned the position of matching point between the cylindrical form and the water line are proposed to get the preliminary faired water lines.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.162-171
• /
• 2012

In this study, a new dynamic interaction analysis method for tilting trains and curved track is presented. Three dimensional lumped parameter vehicle elements are used to model tilting train, and the proposed analysis technique can simulate driving direction change of vehicle, the effect of track cant, wheel-rail contact angle, and tilting angle of tilting trains, etc. The proposed method passed several basic verification tests, and it is expected that the suggested method is applicable for practical problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.827-832
• /
• 2013

In this study, curve responsiveness was assessed based on the lateral force and running safety was evaluated based on the wheel unloading ratio and derailment coefficient, which is the ratio of the wheel load and the lateral force. The evaluation of the curving performance and running safety of the new high-power electric locomotive showed that the derailment coefficient appeared higher when the wheel-set was set to the front of the train instead of being placed backward, and the maximum value of the derailment coefficient was recorded as 0.572 on the Gyeongbu line. Furthermore, the lateral force increased in curved sections, and it appeared to be proportional to the curve radius. Meanwhile, a maximum axis lateral force of 77.6 kN was recorded on the Taebaek line, and the wheel unloading ratio was 47.6% on the Yeongdong line. Finally, the running safety at the maximum speed as well as the through-curve performance of the curve radius satisfied the required standards.