• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.74-75
• /
• 1994

부유물질을 함유한 용수$\cdot$폐수의 정밀여과시 FOULING 때문에 세정약품이 많이 들고 MEMRANE 수명이 단축되는 문제점을 해결하기 위해 HOLLOW FIBER TYPE MEMBRANE을 이용한 역세형정밀 여과시스템을 개발하여 TEST를 실시하고 역세조건에 따른 FLUX, 제거율 및 역세효율을 조사하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.11a
• /
• pp.154-157
• /
• 2002

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.68-73
• /
• 1993

여과포에 의한 분진 포집기술은 다른 분진포집기술에 비해 가장 우수한 집진성능을 나타낼수 있는 집진기술로서 최근에 와서는 분진발생공정, 연소설비 및 폐기물 소각설비의 중금속 물질, 유해 기체 및 분진의 동시포집 적용 등 광범위한 산업분야에 적응되어 운전되고 있다. 배출기체의 악조건과 습도가 다량 함유된 조건에서는 여과포 집진장치의 적용이 어렵다고 생각되고 있지만, 처리 기체의 조건 및 포집분진의 특성에 적합한 여과포의 개발과 탈진방식(cleaning method)의 개선으로 인해 해결이 가능하게 되었다. 또한 여과포에 의한 분진포집기술은 장치를 통과하는 배출기체의 속도가 다른 집진기술에 비해 느려 여과포 면적이 상대적으로 넓어져서 장치의 설치면적이 많이 소요된다는 단점이 있으나, 여과포를 원간으로 봉재하여 서로 접근시켜 많은 갯수를 다단으로 배치함과 동시에 연속탈진시스템(on-line cleaning)을 채택함으로써 장치에 소요되는 면적을 최소한으로 줄이려는 연구가 계속되고 있다. 대체적으로 여과포에 의한 분진포집기술의 산업체 적용에서 장치의 압력손실은 약 100 - 100 $mmH_2O$ 정도의 범위가 대부분이고 분진 포집효율은 거의 99.9%에서 99.99% 정도 달성이 가능하다[1,2,3].

• Membrane Journal
• /
• v.16 no.1
• /
• pp.31-38
• /
• 2006

The ceramic microfiltration system with periodic $N_2$-back-flushing was operated for treating paper wastewater discharged from a company making toilet papers by recycling milk or juice cartons. Two kinds of alumina membranes with 7 channels used here for recycling paper wastewater. The optimal filtration time interval for HC04 membrane with $0.4{\mu}m$ pore size was lower value of 4 min than 16 min for HC10 with $1.0{\mu}m$ pore size at fixed back-flushing time 40 sec, trans-membrane pressure $1.0kg_f/cm^2$ and back-flushing pressure $5.0kg_f/cm^2$. From the results of TMP effect at fixed filtration time interval and back-flushing time, the lower TMP was better on membrane fouling because high TMP could make easily membrane cake and fouling inside membrane structure. However, we could acquire the highest volume of total permeate at the highest TMP for the reason that TMP was driving force in our filtration system to treat paper wastewater. Then the permeate water of low turbidity was acquired in our microfiltration system using multi channels ceramic membranes, and the treated water could be reused in paper process.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.367-373
• /
• 2017

Pressurized membrane module systems, including hollow fiber type of Microfiltration (MF) and Ultrafiltration (UF) membranes are being increasingly used in drinking water treatment due to their high removal efficiency of pathogen. However, when fibers are damaged in pressurized membrane system, the pathogen will be able to penetrate the membrane. Therefore, it is essential to guarantee the regulatory requirements for water quality by an effective on-line or off-line condition integrity monitoring methods. Recently, pressure decay test (PDT) which is one of membrane integrity tests has been reflected to drinking water treatment plants using pressurized membrane module. In this paper, three different method were used to perform PDT and three different sensitivity values were analyzed through experiments. Three types of direct integrity test methods were applied to pressure feed side, filtrate side and bidirectional pressure decay test. The results of these experiments show that the sensitivity was increasing when the volume of pressurized gas was decreasing. The sensitivity is inversely proportional to the gas volume. Furthermore, it is desirable to increase pressure difference between feed side and permeate side in order to achieve higher sensitivity in the PDT by membrane damage.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.354-361
• /
• 2008

Effects of operational conditions and solution chemistry on permeate flux in a hybrid ozone-ceramic ultra-filtration (UF) membrane system treating natural organic matter (NOM) were investigated. Results showed that the extent of permeate flux decline was higher at higher cross-flow velocity and ozone dosage, but it was higher at lower transmembrane pressure (TMP). The mechanism of fouling mitigation was found to be more dependent upon reaction between ozone and natural organic matter at/near catalytic membrane surface than scouring effect due to ozone gas bubbles. Addition of calcium into model NOM solution at high pH led to significant decline in permeate flux while the calcium effect on permeate flux decline was less pronounced at lower pH. After permeate flux decline during the early stage of filtration, the flux started recovering and approached fully to the initial value of it due to degradation of NOM by catalytic ozonation at ceramic membrane surface in the hybrid ozone-ceramic membrane system.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.04a
• /
• pp.101-104
• /
• 1999

PEFE, Asypore, PC, Nylon 등의 정밀여과막에 0.1내지 4$\mu\textrm{m}$의 입자분포를 가진 kaolin 용액을 dead-end 형 여과장치(Amicon Cell, 8050)를 이용하여 투과실험을 하였다. 또한 공칭세공이 0.2$\mu\textrm{m}$ 인 PTFE(Sartorius 사) 막에 kaolin, bentonite, yeast, starch 등 입자의 크기 및 특성이 다른 0.1%의 용액들을 1 bar 의 운전압력과 200rpm의 회전속도로 투과실험을 하였다. 투과 실험한 자료를 근거로 저항모델을 적용하여 분석하였으며 순수 하락도와 액체전이법으로 세공분포를 확인하였다.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.448-457
• /
• 1999

Citrus fruits are consumed worldwide due to their unique flavor and nutrition value. It is necessary to remove the haze material as well as to minimize the loss of major compounds such as organic acids, sugars, and ascorbic acid in membrane processes for clarification of juice. The objective of our research was to select the best membrane among one surface filter (Whatman No.4) and five microfiltration filters (GF/A, GF/D, GF/F, Gelman, and SM). Tangerine fresh blended with three times of water was partially clarified with 170 mesh followed by prefiltration in a Samduck filtration system. The best membrane was selected by measuring the amounts of major compounds in the permeates as well as the flux which were statistically analyzed with SAS program. The foulants on the membrane surface were observed by SEM. The flux of GF/A and GF/F decreased with time at probability 0.10. Gelman, SM, and GF/D maintained the stable flux. Gelman showed the highest total scores including nutritive value (the amounts of citrate, malate, and ascorbic acid) and purchasing need (brix and color). Therefore, the microfiltration membrane process was a very effective method in tangerine juice clarification and Gelman type A/E was proved to be the best membrane among the five microfiltration membranes.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.15-27
• /
• 2013

In order to plan out the Daegu G membrane filtration water treatment plant, water quantity, water quality and process stability were evaluated using the field pilot-scale tests, during the six months of continuous operation, including low water temperature period. The field model experiments, which were carried out according to the Installation Criteria of Ministry of Environment, consisted of two series : series 1 - water quality verification, and series 2 - membrane process evaluation. The process water quality met all drinking water standards with less than 0.03 NTU. Moreover, process operation showed a stable membrane pressure with 99% of recovery ratio. This shows that the tests were properly designed in terms of the influence of water loading and temperature. In conclusion, the purpose of this study is to establish core technology for advanced drinking water treatment, through on-going accumulation of engineering and construction know-how.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.213-220
• /
• 2006

Microfiltration and Nanofiltration membrane were prepared and properties of the membrane system were studied for the application of desaltingfrefiningiconcentrating process of dye production. The membrane system improved the quality of dye produce and productivity was enhanced due to reduction of processing steps and material cost. Membrane and pressure type membrane element in various dye concentration for using desaltingirefiningiconcentrating of dye processing were investigated.