• KSBB Journal
• /
• v.17 no.1
• /
• pp.80-87
• /
• 2002

Laboratory scale aerobicfanaerobic biofilm reactor was used for simultaneous and stable removal of organics, N and P components to investigate optimum design and operation parameters and to analyze the microbial distribution and consortium structure of nitrification and denitrification bacteria in aerobic and anaerobic biofilm systems. The biofilm reactor was successfully operated for 143 days to show $COD_{cr},\;BOD_5$, SS removal efficiencies of 88, 88, and 97%, respectively. During the experiment period, almost complete nitrification efficiency of 96% was achieved. Denitrification efficiency was about 45% without addition of any external carbon sources. In case of total phosphorus removal, 74% of the inlet phosphorus was removed. Fluorescence in situ hybridization (FISH) results showed that most of the ammonia oxidizing bacteria in the aerobic nitrification zone was found to be Nitrosomonas species while Nitrospira was the representative nitrite oxidizing bacteria. For the denitrification, Rhodobacter, Rhodovulum, Roseebacter and Paracouus were the dominant denitrification bacteria which was 10 to 20% of the total bacteria in numbers.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.38-49
• /
• 2024

Wastewater treatment using membrane bioreactors has been extensively used to alleviate water shortage and pollution by improving the quality of the treated water discharged into the environment. However, membrane biofouling persistently holds back an MBR process by reducing the process efficiency. Herein, we synthesized carbon nanospheres (CNSs) with many hydrophilic oxygen groups and utilized them as an additive to prepare high-performance ultrafiltration (UF) membranes with hydrophilicity and porous pore structure. CNSs were found to form crescent-shaped pores on the membrane surface, increasing the mean surface pore size by about 40% without causing significant defects larger than bubble points, as the CNS content increased by 4.6 wt%. In addition, the porous pore structure of CNS composite membranes was also attributable to the CNS's isotropic morphologies and relatively low particle number density because the aforementioned properties contributed to preventing the polymer solution viscosity from soaring with the loading of CNS. However, too porous structure compromised the mechanical properties, such that CNS2.3 was the best from a comprehensive consideration including the pore structure and mechanical properties. As a result, CNS2.3 showed not only 2 times higher water permeability than CNS0 but also 5 times longer operation duration until membrane cleaning was required.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2125-2134
• /
• 2000

This research was to develope the economical treatment processes of the landfill leachate to meet the legal discharge standards. To achieve this purpose, experiments were conducted in laboratory to choose the optimum process and to obtain the design factors before a pi!ot-scale test. The concept of the process developing in this research was using the reverse osmosis system. The submerged membrane bio-reactor was used to achieve pre-treatment of reverse osmosis system and the concentrate was treated by evaporator with land fill gas as a fuel. The results of the research showed that SS, $BOD_5$, $COD_{cr}$, $NH_4{^+}-N$ and T-N were removed 99.0%, 43.0%, 12.9%, 48.5% and 18.7% respectively in the submerged membrane bio-reactor. The reverse osmosis system could remove $BOD_5$, $COD_{cr}$, $NH_4{^+}-N$ and T-N as an efficiency of97.5%, 97.6%, 79.7% and 85.4% respectively. The evaporator could remove $COD_{cr}$, $NH_4{^+}-N$ and T-N as an efficiency of 90.5%, 50.6% and 63.3% respectively. However the condensed water of the evaporator was not satisfied the legal standard and should be treated in reverse osmosis with the pre-treated leachate.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.96-104
• /
• 2024

Antibiotics is one of the emerging pollutants found in various water sources as well as wastewater due to its excessive use. Different techniques are available for treating antibiotics contaminants in water such as advanced oxidation process and biological treatment etc. These two processes are ineffective, and the generation of side products makes this process more complicated. Membrane technology is another alternative for the removal of contaminants. To improve the removal of antibiotics and their resistant gene, membrane bioreactors are modified with NaClO and carbon materials. The generation of abundant reactive species is active against the antibiotic's resistant genes.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.117-121
• /
• 2003

SBR과 SBBR 모두 대부분의 유기물은 포기기간에 소모되었으며, SBBR의 경우 부족한 유기물 조건에서도 원활한 탈질화 반응이 일어난 것을 볼 때, 유기물 농도가 낮은 우리나라의 하수에 적합한 공정으로 생각된다. 질산화 속도에 있어서는 유기물과 용존산소의 접촉기회에 있어 유리한 조건을 가진 SBR이 더 크게 나타났다. 그러나 탈질화 반응에 있어서는 SBBR이 더 높은 것으로 나타났다. SBR의 경우 높은 $NO_3$의 존재로 인해 1차 비포기 기간중 인의 방출은 거의 발생하지 않았으나, SBBR의 경우 1차 비포기 기간에 인 방출과 1차 포기기간에 인 섭취가 일어났다.

• Membrane Journal
• /
• v.2 no.2
• /
• pp.122-128
• /
• 1992

A study on the citric acid production was performed in various size dual hollow fiber bioreactors with immobilized Aspergillus niger (KCTC 1232). The final dry cell mass density reached 300g/l based on the space volume available for cell growth. Under air and oxygen aeration the volumethe productivity reached 0.63 and 1.02g/l.h, which cormsponded to 10 and 16 fold over those of batch fermentation, respectively. The initial pH of the medium was a critical factor and the lower value resulted in higher citric acid yield. The increase in the feeding rate of medium or the number of reactor unit resulted in the improvement of the productivity due to higher consumption rate of substrate.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.451-454
• /
• 2000

This study was carried out to investigate the effects of hydraulic backwash load and porous ceramic media on the biological nitrogen removal efficiencies of a biological aerated filter. An upflow anoxic-oxic biological aerated filter(AO-BAF) with porous ceramic media can remove nitrogen by nitrification and denitrification in single unit. After the AO-BAF backwash, nitrogen removal efficiency was lowest and gradually increased to the steady state. Nitrification efficiency, however, showed the opposite result. It is likely that the biofilms are exposed to aerobic condition as the excess biofilms were sloughed off by backwashing

• KSBB Journal
• /
• v.7 no.4
• /
• pp.252-257
• /
• 1992

A flat-type membrane bioreactor(FMBR ) for aerobic whole cell immobilization was developed and its performance for the citric acid production was investigated using Aspergillus niger (KCTC 1232). The reactor consisted of three layers. The top layer contained flowing air for oxygen supply, the middle layer had stationary cells, and the bottom layer had flowing aqueous nutrients. The initial pH of the culture medium played an important role in citric acid production and the lower initial pH of the culture medium resulted in a higher citric acid yield. Under air and pure oxygen aerations the volumetric productivity reached 0.20 and 0.40g/Lh. Furthermore, the productivity improved with the increase of the culture medium feed rate.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.4
• /
• pp.133-137
• /
• 2005

Experiments were conducted to find the optimal acclimatization conditions for Eleutherococcus senticosus plantlets regenerated from bioreactor cultured somatic embryos, various acclimatizing conditions were compared regarding both survival rate and growth of the plantlets. Among the various temperature and artificial soil tested, the highest survival rate (88%) was observed when plantlets were acclimatized in Klasmann bed soil at $10^{\circ}C$ When in vitro plantlets directly transplanted to field environment, shading treatment was necessary and 50% shading was more effective than 30% shading. Transplanting season were also important for successful acclimatization of in vitro cultured plantlets, transplanted on March 20 with 50% shading exhibited the best survival rate and further growth.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.3
• /
• pp.183-190
• /
• 2020

Although membrane bio-reactor (MBR) has been widely applied for wastewater treatment plants, the membrane fouling problems are still considered as an obstacle to overcome. Thus, many studies and commercial developments on mitigating membrane fouling in MBR have been carried out. Recently, high voltage impulse (HVI) has gained attention for a possible alternative technique for desalting, non-thermal sterilization, bromate-free disinfection and mitigation of membrane fouling. In this study, it was verified if the HVI could be used for mitigation of membrane fouling, particularly the internal pore fouling in MBR. The HVI was applied to the fouled membrane under different conditions of electric fields (E) and contact time (t) of HVI in order to investigate how much of internal pore fouling was reduced. The internal pore fouling resistance (R_f) after HVI induction was reduced as both E and t increased. For example, R_f decreased by 19% when the applied E was 5 kV/cm and t was 80 min. However, the R_f decreased by 71% as the E increased to 15 kV/cm under the same contact time. The correlation between E and t that needed for 20% of R_f reduction was modeled based on kinetics. The model equation, E^1.54t = 1.2 × 10³ was obtained by the membrane filtration data that were obtained with and without HVI induction. The equation states the products of En and t is always constant, which means that the required contact time can be reduced in accordance with the increase of E.