• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.32-33
• /
• 1997

중공사막은 제조과정인 wet spining의 과정에서 defect가 형성될 수 있어 분리선택도에 큰 영향을 미친다. 이러한 defect의 처리 방법으로는 dipping method등의 방법이 현재 널리 쓰이고 있다. dipping method는 제조된 중공사막을 PDMS 등의 고분자용액 속으로 통과시켜 결과적으로 중공사막 표면에 얇은 고분자막이 형성되도록 하는 방법이다. 그러나 이러한 방법으로 중공사 막을 처리할 경우 고분자 용액이 pore내로 침입하거나 중력으로 인하여 용액이 아래쪽으로 몰려 하반부의 두께가 두꺼워진다는 단점이 있다. 본 연구에서는 플라즈마 반응기 내의 전극사이의 공간에서 substrate의 위치를 변화시켜가면서 thickness를 측정하여 중공사막의 plasma coating을 위한 기초 자료를 정립하여 중공사막 plasma 표면처리 장치 개발에 기여하고자 한다.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.26-34
• /
• 1995

In this study, polysulfone was carboxylated(CPSf), as a method of introducing carboxyl group to polymer main chain using direct lithiation reaction. Then, poly(1-alkyl-4-vinylpyridinium iodide-co-divinylbenzene) (MeVpI-DVB) containing pyridinium cation which has an anion selectivity as a fixed carrier was synthesized. And polymer membranes were prepared by mixing CPSf and MeVpI-DVB. Characteristics and permeation of membranes were investigated. As a result of synthesizing CPSf/MeVpI-DVB, blend was formed, not new copolymer. As the content of CPSf amount increasing, thermal stability of membranes was increasing. Ion exchange capacity was 1.0~1.8(meq/g dry mem.) and water content was 0.16~0.26(g $H_2{O}$)/g dry mem.) and fixed ion concentration was 6.4~7.3(meq/g $H_2{O}$) in synthetic membranes. The $Cl^-$ flux showed an increase due to the increase of CPSf content.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.912-917
• /
• 1998

화학적 산화막(SiOx)이 형성된 Si(100)기판 위에 Co-silicide의 형성과 계면 형상에 관한 연구를 하였다. 화학적 산화막은 과산화수소수(H2O2)의 인위적 처리에 의해 약 2nm을 형성시켰다. 그 위에 5nm 두께의 Co 박막을 전자빔 증착기에 의해 증착시킨 후 열처리하여 Co-silicide를 형성하였다. 화학적 산화막 위에서 Co-silicide 반응기구를 알아 보기 위해 $500^{\circ}C$-$900^{\circ}C$의 온도 범위에서 ex-situ와 in-situ 열처리를 하였다. 이와같이 형성된 Co-silicide 시편의 상형성, 표면 및 계면 형상, 그리고 화학적 조성을 XRD, SEM, TEM, 그리고 AES를 이용하여 분석하였다. 분석 결과 es-situ 열처리시 $700^{\circ}C$까지 CoSi2 상은 형성되지 않았고 Co의 응집화현상이 일어났다. $800^{\circ}C$ 열처리한 경우에는 CoSI2가 형성되었고 facet 현상이 크게 나타났으며 불연속적인 grain 들이 형성되었다. In-situ 열처리한 경우에는 저온에서 ($550 ^{\circ}C$)반응하여 Co-silicide가 형성되기 시작하였으며 $600^{\circ}C$부터는 facet에 의해 박막의 특성이 나빠지기 시작했다. $550^{\circ}C$에서 Co가 화학적 산화막 층을 통해 확산하여 균질한 Co-silicide를 형성하였다. 이와같이 형성된 균질한 실리사이드 층을 이용하여 다단계(55$0^{\circ}C$-$650^{\circ}C$-$800^{\circ}C$)열처리에 의해 균질한 다결정 CoSI2의 형성이 관찰되었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.629-637
• /
• 2000

A two-phase anaerobic reactor with a submerged microfiltration system was tested for its ability to produce methane energy from organic wastewater. A membrane separation system with periodic backwashing with compressed air was submerged in the acidogenic reactor. The cartridge type of microfiltration (MF) membrane with pore size of $0.5{\mu}m$ (mixed esters of cellulose) was tested. An AUBF (Anaerobic Upflow Sludge Bed Filter: 1/2 packed with plastic media) was used for the methanogenic reactor. Soluble starch was used as a substrate. The COD removal was investigated for various organic loading with synthetic wastewater of 5,000 mg starch/L. When the hydraulic retention time (HRT) of the acidogenic reactor was changed from 10 to 4.5 days, the organic loading rate (OLR) varied from 0.5 to $1.0kg\;COD/m^3-day$. When the HRT of the methanogenic reactor was changed from 2.8 to 0.5 days, the OLR varied from 0.8 to $5.8kg\;COD/m^3-day$. The acid conversion rate of the acidogenic reactor was over 80% in the 4~5 days of HRT. The overall COD removal efficiency of the methanogenic reactor showed over 95% (effluent COD was below 300 mg/L) under the highly fluctuating organic loading condition. A two-phase anaerobic reactor showed an excellent acid conversion rate from organic wastewater due to the higher biomass concentration than the conventional system. A methanogenic reactor combined with sludge bed and filter, showed an efficient COD and SS removal.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.104-104
• /
• 2003

다양한 구조를 갖는 polysilsesquioxane은 열적, 전기적, 기계적 성질이 우수하여 차세대 고집적 반도체용 저 유전율 층간 절연막 재료로 부각되고 있으며, 유/무기 하이브리드 재료로 많은 연구 대상이 되고 있다. 그러나 PMSSQ(polymethylsilsesquioxane)는 취성으로 인한 반도체 제조의 CMP 공정에서 미세 크렉 발생의 위험이 있으므로 막의 인성 강화가 요구되고 있다. 이를 위하여 PMSSQ의 취성을 보완하기 위한 목적으로 선형 분자인 dimethylsiloxane을 10-20mo1% 도입하고자 하였다. 이때 도입된 dimethylsiloxane기가 PMSSQ에 균일하게 분포하지 않으면 실리콘 기판에 코팅 후 약 43$0^{\circ}C$의 열처리 공정 중에 열분해 되는 위험이 있다. 이에 따라 본 연구에서는 dimethylsiloxane기의 열분해에 의한 문제를 최소화하기 위하여 출발 물질인 MTMS(methyltrimethoxysilane)와 DMDMS(dimethyldimethoxysilane)과의 가수분해 속도차이를 고려한 단계(step) 반응법과 MTMS 와 DMDES(dimethyldiethoxysilane)를 사용한 리간드 교환법(ligand exchange)으로 dimethylsiloxane이 PMSSQ에 도입된 공중합체를 합성하였다. 각 합성 방법에 따라 합성된 공중합 PMSSQ의 특성을 TGA, TG-IR, $^1$H-NMR, $^{29}$ Si-NMR과 in-situ IR을 통하여 분석하였다. 또한 dimethylsiloxane 도입 양 및 상기 제조 방법에 따라 합성한 공중합체를 Si 기판위에 코팅하여 43$0^{\circ}C$에서 열처리한 후 코팅막의 강도, 두께 및 굴절율 변화를 ellipsometry 와 nanoindenter로 분석하였다.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.263-269
• /
• 2011

In the operation of submerged membrane-coupled sequencing batch reactor, the effect of filling step on the removal efficiency and filtration performance were investigated. Two sets of operation modes, the filling step located in the beginning of aerobic step (Mode-1) and the beginning of anoxic step (Mode-2), during 89 days were conducted. There was no wide difference in the COD removal and filtration performance between two sets of operation modes. But in the removal efficiency of nutrients (total nitrogen and total phosphorous), Mode-2 was more effective than Mode-1. In the case of Mode-2, average removal efficiencies of COD, total nitrogen, and total phosphorous were 99.1, 73.3, and 77.3%, respectively.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.20-30
• /
• 2014

A membrane-coupled sequencing batch reactor (MSBR) was used for the advanced treatment of rural village sewage which is very low C/N ratio. The effect of powdered activated carbon, aeration rate, and external organic material loadings on the treatment efficiency and filtration performance were investigated in sequencing batch reactor, in which a flat-sheet type microfiltration membrane with a pore size of $0.4{\mu}m$ was submerged. At the initial operation (within 54 days) MLSS concentration, and the removal efficiencies of COD, T-N, and T-P were increased with the increase of C/N ratio. After 89 days the removal efficiencies of COD, T-N, and T-P were 97.1%, 75.0%, and 48.3%, respectively. Suspended solid-free effluent was obtained by membrane filtration. The T-P removal was relatively low because of depending on the amount of excess sludge wasting. During the operation of MSBR with powdered activated carbon, the particle size of the sludge reduced by the increase of collision frequency and mixing intensity. In comparison with MSBR without powdered activated carbon, TMP of MSBR with that was significantly elevated.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.17-24
• /
• 1983

The authors carried out an experiment to find the optomotor response of killifish, Orizias latipes(TEMMINCK et SCHLEGEL) and Yellowtail, Seriola quinqueradiata (TEMMINCK et SCHLEGEL) according to the colors of the netting pattern on the visual screen and the revolving velocities of the visual screen. The experimental water tank was made of 0.5 cm thick transparent acryl in the cylindrical shape (100R$\times$42H cm). The water level in the tank was maintained 30cm high from the bottom. The colors of the netting pattern (mesh size: 19.1cm, width of netting twine: 1.5cm, hanging ratio: 84%) on the three visual screens were black, red and green respectively. The revolving velocities of the visual screen were controlled by pulley, bevel gear and variable speed motor in three steps; slow (15.0cm/sec), middle (37.4cm/sec) and high (62.9cm/sec). The fish was put into the water tank before each experiment and released in it for 30 minutes in order to acclimatize itself to the tank. The visual screen was revolved for 4 minutes per each experiment, at first the fish was released for 1 minute, and then the behavior of the fish was observed for 3 minutes. In the course of clockwise and counter clockwise experiments, 10 minutes-pause was given for the rest. The behavior of the fish was observed by video system, and rounding number and swimming speed of the fish were analysed. The results obtained are as follows: (1) Optomotor response rate of Killifish and yellowtail were 95% and 94% respectively. (2) Response of the fish according to the colors of the netting pattern on the three visual screens was best in black, and second in red and third in green. (3) Response of the fish according to the revolving velocities of the visual screen was best in high speed, and second in middle speed and third in slow speed.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.183-183
• /
• 1999

Slurry sol(30at% anatase TiO$_2$)을 이용하여 스핀코팅으로 유리기판에 TiO$_2$박막을 제조하였다. 박막의 두께는 코팅주기의 횟수로 조절하였다. 한 코팅주기는 스핀코팅, 건조, 열처리를 포함한다. 박막의 반응성은 막 위에서의 자외선강도가 0.4mW/$\textrm{cm}^2$인 조건에서 벤젠기체의 광분해 속도를 통해 조사하였다. 박막의 두께가 증가할수록 표면적인 증가로 인해 반응성은 증가하였으며, 4$\mu\textrm{m}$정도이상의 두께에서 반응성은 더 이상 증가되지 않았다. porous한 TiO$_2$박막은 비교적 넓은 유효 표면적을 가지고 있으며, 그것은 두께증가에 따라 반응속도를 결정하는 결과를 낳았다.