• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.117-119
• /
• 2001

• Proceedings of the KWS Conference
• /
• 1992.10a
• /
• pp.125-125
• /
• 1992

• Proceedings of the KWS Conference
• /
• 1990.11a
• /
• pp.117-120
• /
• 1990

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.7-13
• /
• 2019

This study aims to develop a FE Model to simulate dissimilar friction stir welding and to address its potential for fundamental analysis and practical applications. The FE model is based on Coupled Eulerian-Lagrangian approach. Multiphysics systems are calculated using explicit time integration algorithm, and heat generations by friction and inelastic heat conversion as well as heat transfer through the bottom surface are included. Using the developed model, friction stir welding between an Al6061T6 plate and an AZ61 plate were simulated. Three simulations are carried out varying the welding parameters. The model is capable of predicting the temperature and plastic strain fields and the distribution of void. The simulation results showed that temperature was generally greater in Mg plates and that, as a rotation speed increase, not the maximum temperature of Mg plate increased, but did the temperature of Al plate. In addition, the model could predict flash defects, however, the prediction of void near the welding tool was not satisfactory. Since the model includes the complex physics closely occurring during FSW, the model possibly analyze a lot of phenomena hard to discovered by experiments. However, practical applications may be limited due to huge simulation time.

• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.103-106
• /
• 1992

건설기계는 우리나라의 산업발전과 성장해 왔으며, 또한 발전과정에서 기여한 바도 크다. 건설 기계의 수요는 1970년대 초부터 지하철, 고속도로등 사회간접자본 개발이 활발해 짐에 따라 건 설기계에 대한 투자나 내수가 성장하기 시작하여 1980년대 후반 국가 산업규모가 확대됨에 따 라서 크게 신장하여, 1982년 내수규모가 약 2100여대이던 것이 1991년에는 16,000여대로 증가해 왔다. 이 중 대표기종인 굴삭기가 전 건설중장비의 약 76%('91년도 금액비)를 점하고 있고, 또한 건설기계는 건설작업의 성역화에 기여해 왔으며 앞으로도 이 역할은 변함없을 것이다. 최근에는 건설기계의 안전성, 공정의 자동화, 로봇화 등이 크게 요구되고 있다. 건설기계는 구조상 연강 후판(두께10-50mm)이 주류를 이루고 내마모부품이 많다. 구성부는 강판이 사용이나(총 중량의 약 30%)일부 주강과 단조품이 사용되고 있다. 경량화를 위하여 고장력강이 사용되고, 기어나 샤프트 등에는 합금강이나 탄소강이 쓰이고 있다. 생산공정은 자동화, 무인화가 추진되고 있고, 설계는 CAD/CAM화가 보편적으로 활용되고 있다. 용접은 탄산가스 아아크 용접이 대부분이고, 일부 MAG또는 플락스 충전 와이어(FLUX CORED WIRE)를 사용하고 있다. 합금강 등에는 마찰용접이나 전자 비임용접이 활용되기도 한다.

• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.211-214
• /
• 1994

• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.215-218
• /
• 1994

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.331-336
• /
• 2004

Dissimilar friction welding were produced using 10mm and 11mm diameter solid bar in Inconel ally(IN X-750) to Stainless steel(STS316L) to investigate their mechanical properties. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, Virkers hardness surveys of the bond of area and HAZ and macro-structure investigations. The specimens were tested as welded, not heat-treated. The tensile strength of the friction welded steel bars was increased up to $95\%$ of the STS316L base metal under the condition of all heating time. Optimal welding conditions were n=2,000(rpm), $P_1=220(MPa),\;P_2=260(MPa),\;t_1=4(s),\;t_2=4(s)$ when the total upset length is 7(mm).

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.133-137
• /
• 2003

The shock absorber for vehicles is the important component to absorb the shock in driving. These essential components, piton and piston rod, must be made of S25C, S45C and SCM440 generally depending on kind of vehicles, precisely machined and assembled by the bolt. And it has been difficult to weld this sort of dissimilar materials. They could be unstable in the quality by the conventional arc welding. And also they have a lot of technical problems in manufacturing. But by the friction welding technique, it will be able to be made without such problems. These factors above necessitate nowadays the domestic development of the shock absorber by friction welding and a new approach of study on real-time quality evaluation by AE techniques.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.121-130
• /
• 1993

A study off riction welding of high speed steel(SKH 51) bar for blade side to carbon steel(STC 3)bar for shank side was carried out experimentally through tensile test, hardness test, microstructure, and acoustic emission (AE) test. So, this paper deals with optimizing the welding conditions and the real-time quality (strength) evaluation of friction weleded joints by acoustic emission technique. The results obtained are summarized as follows: (1) For friction welded joints of SKH 51to STC 3 steel bars, the total upset (U) increases linearly with an increase of heating time (t sub(1)). (2) The determined optimum welding conditions are heating time (t sub(1)) 7-9 sec, upsetting time (t sub(2)) 5 sec, heating pressure(P sub(1)) 12 kg sub(f)mm supper(2), upsetting pressure (P sub(2)) 15 kg sub(f) mm supper(2) and rotating speed (n) 2, 000 rpm, resulting in a computed relationship between the tensile strength of the joint .sigma. (kg sub(f) mm supper(2)) and the heating time t sub(1) (sec) as the following. sigma.=2.39t sub(1)