• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1281-1293
• /
• 2013

A sophisticated finite element model is illustrated to analyze the behavior of Prefabricated Parallel Wire Strand(PPWS) sockets for main cables of suspension bridges. An orthotropic model is proposed for the casting material by considering both effects of individual wires and a casting alloy, and the contact between surfaces of a socket and a casting alloy is idealized by using the Coulomb friction and the surface-based contact model. The proposed FE model is verified by comparing the strain distributions obtained from the tensile test and FE analysis. The mechanical behavior of a socket is investigated with respect to the variation of the frictional coefficient. The result shows that the friction between surfaces significantly diminishes the stress concentration of a socket and a casting alloy, and the normal stress from the design equation represents the averaged value of the upper and lower quartiles in the distribution of contact stresses between a socket and a casting alloy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.159-163
• /
• 2001

마찰구동은 다른 구동방식에 비하여 구조가 간단하고, 기계적인 정도를 얻기 쉬우며, 백래쉬 등에 기인하는 비선형 요소인 로스트모션이 없고 관성이 작아 구동력이 작은 이점이 있다. 그 반면에 접촉부에서 미끄럼이 발생하여 큰 구동력을 얻기 어렵고 마찰저항에 의하여 마멸이 생기는 결점이 지적되고 있다. 본 연구에서는 초정밀가공기용 위치결정기구로 마찰구동기구를 사용하기 위하여 위치 결정도에 관한 설계, 구동력의 설계 및 재료의 선택에 관하 여 분석하고 시작품을 제작하여 특성을 연구하였다.

• Journal of the KSME
• /
• v.32 no.11
• /
• pp.917-926
• /
• 1992

트라이볼로지의 핵심분야인 마찰, 마멸에 대해 간단히 살펴보았다. 과학의 급속한 발전에도 불 구하고 아직도 이들에 대한 완전한 지식은 아직 요원한 상태이다. 그러나 현재까지 알려진 지 식으로도 기계시스템의 최적설계에 크게 도움이 된다는 사실에 대해서는 의심의 여지가 없다. 앞에서 함께 살펴본 마멸 입자에 대한 소개는 마찰과 마멸의 복합적인 산물로서 이의 관찰을 통해 분석하고자 하는 기계시스템의 상태를 효과적으로 진단하여 트라이볼로지적 거동을 이해 하는 데에 중대한 정보가 된다. 따라서 마찰과 마멸에 대한 궁극적인 연구와 함께 그 산물인 마멸입자에 대한 보다 적극적인 이해와 지식의 축적은 요소(tribo-elements)의 고성능, 고정밀 화에 크게 이바지할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.817-822
• /
• 2017

The braking system is one of the most important components in vehicles and machines. It must exert a reliable braking force when they are brought to a halt. Generally, frictional heat is generated by converting kinetic energy into heat energy through friction. As the kinetic energy is converted into heat energy, high temperature heat is generated which affects the mechanical behavior of the braking system. Frictional heat affects the thermal expansion and friction coefficient of the brake system. If the temperature is not controlled, the brake performance will be decreased. Therefore, it is important to predict and control the heat generation of the brake. Various numerical analysis studies have been carried out to predict the frictional heat, but they assumed the existence of boundary conditions in the numerical analysis to simulate the frictional heat, because the simulation of frictional heat is difficult and time consuming. The results were based on the assumption that the frictional heat is different from the actual temperature distribution in a rotating brake system. Therefore, the reliability of the cooling effect or thermal stress using the results of these studies is insufficient. In order to overcome these limitations and establish a simulation procedure to predict the frictional heat, this study directly simulates the frictional heat generation by using a thermal-structure coupling element. In this study, we analyzed the thermo-mechanical behavior of a brake model, in order to investigate the thermal characteristics of brake systems by using the Finite Element method (FEM). This study suggests the necessity to directly simulate the frictional heating and it is hoped that it can provide the necessary information for simulations.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.19-27
• /
• 2002

Dynamic responses of a multi-span simply supported bridge are investigated to examine the effect of bearing damage under seismic excitations. The damaged bearings are modeled as sliding elements with friction between the superstructure and the top of the pier. Various values of the friction coefficients are examined to figure out the effect of damaged bearings with various levels of peak ground accelerations. It is found that the global seismic behaviors are significantly influenced by the occurrence of bearing damage. It should be noticed that the most possible location of unseating failure of superstructures differs from that in the bridge model without considering the bearing damage. It can be concluded that the bearing damage may play the major role in the unseating failure of a bridge system, so that the damage of bearings should be included to achieve more rational seismic safety evaluation.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.211-218
• /
• 2010

Volume of concrete slab changes by temperature and moisture effects. At that time, tensile stress develops because the slab volume change is restrained by friction resistance between the slab and subbase, and then crack occurs occasionally. Accordingly, researchers have made efforts to figure out the friction characteristics between the slab and subbase by performing push-off tests. Lately, researches to analyze concrete pavement behavior by the friction characteristics have been performed by finite element method. In this study, The friction characteristics between the slab and subbase were investigated based on the friction test results for lean concrete, aggregate, and asphalt subase widely used in Korean concrete pavements. The energy method bilinearizing relation between nonlinear friction resistance and displacement were suggested. The friction test was modeled by 3-D finite element program, ABAQUS, and the model was verified by comparing the analyzed results to the test results. The bilinear model developed by the energy method was validated by comparing analysis results obtained by using the nonlinear and bilinear friction resistance displacement relation as input data. A typical Korean concrete pavement was modeled by ABAQUS and EverFE and analyzed results were compared to evaluate applicability of the bilinear model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.25-32
• /
• 2013

Entry speed of the vehicle and lateral acceleration acting on the vehicle, roll-angle associated with the overthrow, and then the structure of the road, the friction of road surface are important factors in turning on the curved road. In this study, we analyzed the state change of the vehicle causing entry speed of the vehicle and superelevation of the road, the friction coefficient by using a PC-crash Program for traffic accident reconstruction. As a result, when vehicle is turning the curved road, we could ascertain that the structure of the road and state of the road surface are a major factor about the set up of limited speed.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.648-653
• /
• 2002

2차원 개별요소법을 이용하여 철도사면에 있어서 낙석이 발생되었을 경우 낙석에 의한 운동에너지, 위치에너지 및 마찰에 의한 에너지변화를 사면과 낙석사이의 마찰계수를 매개변수로 하여 분석하였다. 낙석의 낙하양태(미끄러짐과 회전)에 따라 변화하는 1차지면 충돌시간, 2차지면 충돌시간, 2차충돌까지의 비산거리, 1차지면 충돌 후 도약높이, 사면 운동 동안의 낙석 회전횟수 등을 구하였다.

• Journal of the KSME
• /
• v.29 no.3
• /
• pp.294-305
• /
• 1989

소성가공 공정설계의 컴퓨터를 이용한 최적설계를 위하여 선결되어야 기술적 과제를 (i) 구성방 정식, (ii) 윤활 및 마찰조건, 그리고 (iii) 적응적 유한요소망 재구성법 등 3가지 분야로 대별하여 논의하였다. 적절히 선택된 마찰/구속조건 등 경계조건 (boundary condition) 과 적절한 유한 요소망의 구성을 통하여 최종제품의 형상을 만들어내기 위한 금형의 형상 등을 유한요소법으로 해석하여 공정설계상의 시행착오의 범위와 횟수를 줄일 수 있다(7,8). 또 하나의 예로서 자동 차의 자체 등 비교적 대형의 판재가공에서 펀치에 의한 본격적인 가공행정이 이루어지기 전에 판재 자체가 중력에 의하여 처지게 되는데 이러한 중력에 의한 피가공재의 초기 처짐은 최종제 품의 형상에 직접적인 영향을 주게 된다. 이 경우 기존의 유한요소 해석 기법을 사용하여 초 기처짐을 제어하기 위한 판재의 가공전 고정용 금형(binder wrap)의 최적설계를 훌륭히 수행할 수 있다. 이같이 현재의 유한요소 해석법은 많은 기술적 과제를 지니고 있으나 동시에 소성가 공의 컴퓨터 응용설계를 실현하기 위한 궁극적 도구로서 매우 큰 활용 잠재력을 지니고 있다.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.613-623
• /
• 2000

The purpose of this study was to amount of the frictional forces with the brackets and wires, ligation methods, dry/wet, offsets, interbracket distances, velocity and to compare them each other by different conditions. This study tested 0.018'x0.025' slot sized 8 types of orthodontic bracket systems and 0.016', 0.016'x0.022' sized stainless steel, NiTi, Cu-NiTi orthodontic wires. One cuspid bracket were positioned on the slide glass and archwire was engaged into bracket and ligated with elastomeric modules. The values of frictional forces were measured with the instron universal testing machine. The results were as follows; 1. Polycrystalline ceramic bracket had the highest mean frictional forces and followed and by ceramic reinforced plastic bracket, metal bracket, plastic bracket with metal slot, monocrystalline ceramic bracket, single bracket, self-ligating bracket, friction free bracket in descending order. The self-ligating bracket showed low frictional forces in the round wires and high frictional forces in the rectangular wires. 2. Stainless steel wires had the least frictional forces and followed by NiTi, Cu-NiTi wires in descending order. Round wires had lower frictional forces then that of rectangular wires. 3. The stainless steel ligation method had significantly greater mean frictional forces them the elastomeric module ligation method. 4. Artificial saliva statistically increased the frictional forces in stainless steel wire, NiTi wire and Cu-NiTi wire. 5. There was a statistically significant difference with offset change 6. There was no statistically significant difference with interbracket distance in stainless steel wires but a significant difference in NiTi wires as the interbracket was decreased. 7 There was no statistically significant difference with velocity change. From the above findings, self-ligating bracket, stainless steel wires and the elastomeric module ligation method might be effective than any other materials to reduce the frictional forces in the orthodontic treatment and can be correlated to clinical situations seen in orthodontic patient care.