• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.347-348
• /
• 2001

마이크로스트립 안테나가 가지는 가장 큰 단점인 협대역 특성을 개선하기 위해 그 동안 수많은 연 구와 방법들이 제안되었는데 특히 원형편파 안테나는 임피던스 대역폭 외에 축비 대역폭까지도 고려 되어야 하므로 더욱 심화된 협대역의 특성을 가지게 되어 설계에 많은 어려움이 있었다. 일반적으로 원형편파 마이크로스트립 안테나를 설계하는 방법 중 급전 구조면에서는 크게 단일 급전 방식과 하이 브리드 형태의 급전방식이 있다. 단일 급전 방식의 원형편파 안테나는 구조가 간단하고y 제작이 간편 하며, 안테나의 물리적 크기를 줄일 수 있어 배열시 장점이 있으나 구조의 특성상 협대역의 축비 대역 폭을 가지며I 하이브리드 급전 원형편파 안테나는 구조가 복잡하고, 제작이 어려우며, 안테나의 물리적 크기가 커진다는 단점이 있으나 광대역의 축비 대역폭을 가진다. 따라서 원형편파 안테나의 설계시 축 비 대역폭과 안테나의 물리적 크기 간의 trade-off를 고려하여야한다. 최근에는 이를 고려한 단일 급전 을 이용하면서도 개선된 축비특성올 얻을 수 있도록 십자개구 개구를 통해 두 개의 직교 모드를 방사 패치에 급전하는 구조가 제안되기도 하였다. 하지만 이는 일반적인 단일 급전 방식보다 개선된 축비 대역폭을 얻을 수 있었으나 중심주파수에서 2.5%에 불과하였다. 본 논문에서는 단일 급전 십자개구 결합 방식이 가지는 협대역의 축비 대역폭을 개선하기 위해 단 일 급전으로 하이브리드 급전의 효과를 가져올 수 있는 직렬 급전 십자개구 결합 마이크로스트립 안 테나를 제안하였으며, 기존에 발표된 단일 급전 십자개구 결합 안테나와의 축비 대역폭, 이득, 방사패 턴, 그리고 임피던스 대역폭 둥과 비교하여 개선된 특성을 제시하고 제안된 안테나의 타당성을 보였 다. 실제로 2.4GHz의 주파수에서 제안한 직렬 급전 십자개구 결합 단일 마이크로스트립 안테나의 측 정결과 기존에 연구된 안테나보다 약 2배정도 증가된 4.6%의 축비 대역폭, 10%의 임피던스 대역폭 (VSWR<1.5), 그리고 8.2dBi의 최대이득 특성을 확인할 수 있었으며, 이를 바탕으로 시권셜 로테이션 기법올 사용한 $2\times2$ 배열 안테나는 17.5%의 축비 대역폭, 20.8%의 임피던스 대역폭(VSWR<1.5), 그리 고 12.5dBi의 최대이득을 얻을 수 있었다. 이에 해당하는 제안된 단일 안태나와 $2\times2$ 배열 안테나의 구조, 측정된 축비 대역폭 및 이득특성, 그리고 입력 반사손실을 그림 I, 2, 3에 각각 나타내었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.956-963
• /
• 2002

A linearly polarized folded type and H-shape slit folded type microstrip patch antenna at GPS(center frequency:1.575 GHz) were designed and fabricated by folding a conventional single $\lambda_{g}/2(\lambda_{g}:wavelength)$ rectangular patch a half along the length direction at the center of patch and inserting ground plane in the middle. As a result, two types of omnidirectional radiation patterns for E-plane (for zx-plane) in the direction of the length of patch and H-plane (for xy-plane) have been acquired. The experimental results show that the average gains of folded type and slit folded type for omnidirectional E-plane and H-plane are -1.5 dBd (-2.4 dBd) and -3.27 dBd(-2.5 dBd). Slit folded type microstrip patch antenna was more miniaturized than folded type microstrip patch antenna by 27.5 %. In case of slit folded type antenna, average gains of omnidirectional radiation pattern for E & H-plane are almost same.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.874-879
• /
• 2016

A wideband stacked patch antenna with parasitic elements, rectangular and triangle shaped patches, is proposed. Two different shaped parasitic elements are placed in the above of main rectangular microstrip patch antenna in order to achieve wide bandwidth for 860 MHz band. Coupling between the main patch and parasitic patches is realized by thick air gap. The gap and locations of parasitic patches are found to be the main factor of the wideband impedance matching. The proposed antenna is designed and fabricated on a ground plane with small size of $119mm{\times}109mm$ for application of compact transceivers. The fabricated antenna on an FR4 substrate shows that the minimum measured return loss is below -11.68dB at 824 MHz and an impedance band of 818~919 MHz(11.7%) at 10dB return loss level. The measured radiation patterns are similar to those of a conventional patch antenna with maximum gain of 2.11 dBi at 824 MHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1796-1803
• /
• 2013

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication microstrip patch antenna. The aim of the paper is to design and fabricate an inset fed rectangular microstrip antenna and study the effect of antenna dimensions length (L), width (W) and substrate parameters relative dielectric constant (${\varepsilon}r$), substrate thickness on radiation parameters of band width. PSO algorism was applied to IE3D, low resistance against, band width and advantage, were improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.817-821
• /
• 2001

In this paper, we design a microstrip patch antenna using 3-dimensional microstrip transition with the VSWR 1.3 over the PCS band (1.75 -1.87 GHz). We study experimentally the effect of the antenna parameters on antenna input impedance. And using the proposed antenna, we fabricate a polarization diversity any antenna and discuss the possibility of antenna for PCS base station.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1269-1274
• /
• 2019

The paper presents a design of simple four-element microstrip-patch array antenna that is suitable for 5G applications. The proposed array consists of four rectangular microstrip patch elements with semicircular etches made on both sides of each elements. The antenna is fed using the combination of series and corporate feeding networks. The size of the ground is also changed to improve the antenna frequency. Finally, yagi elements are also added to improve the directive gain of the antenna. The presented microstrip patch array is able to achieve wide frequency bandwidth of 21.95-31.86 GHz. The antenna has also attained gain of 9.7 dB at 28 GHz and has maintained high gain and high directivity throughout the frequency band. The proposed array antenna fed by series-corporate feeding network, with low profile and simple structure is a good candidate for 5G applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1724-1732
• /
• 2001

In this paper, a technique for increasing the bandwidth of microstrip array antennas using the parallel coupled lines on a single layer is presented. Four types of wideband microstrip array antenna are designed and the characteristics of each type are analyzed. In addition, an iterative method using a distributed network is proposed to design the parallel coupled lines as a wideband impedance matching network. Measurements show that the proposed antennas provide wider bandwidths ∼1.7 times those of conventional microstirp array antennas, while the sizes of proposed antennal are the same as that of a conventional array. And low cross-polarization level can be obtained through symmetrical locations of the parallel coupled lines section

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.67-74
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.2-11
• /
• 2001

The L-shaped strip is shown to be an attractive feed for the thick mierostrip antenna (thickness around 10% of the operating wavelength). The L-strip incorporated with the radiating patch introduces a capacitance suppressing some of the inductance introduced by the strip itself. In this paper, a wideband microstrip patch antenna fed by L-strip for the PCS ($1,750{\sim}1,850MHz$) and IMT-2000 ($1,920{\sim}2,170MHz$) broad-band is presented. A two-element array fed by L-strip is also proposed. Both the antennas have stable radiation patterns across the passband. The impedance bandwidth is over 31% (VSWR < 1.5, 615 MHz) of the center frequency. Moreover, both the antennas have about 7 dBi average gain.