• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.451-454
• /
• 2002

In this paper, studied on the one-chip design of low cost for the micro-stepping drive having 5-phase Pentagon Type winding. Micro-stepping method in order to eliminate effectively the resonant phenomena and to Increase the positional resolution. This paper proposed trapezoidal current wave- form for current control and provided design- method by using only one-chip of low cost. Therefore the drive will be simple and small size. Also the drive will have a lot of advantage at commercial business. Finally the above study has been implemented on the VHDL. Simulation has been performed to verify the PWM for micro-stepping drive.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.186-188
• /
• 1998

This paper describe the dynamic equation of Linear Pulse Motor(LPM)and the method of microstep drive and newly proposed control method for Linear Pulse Motor(LPM). A microstep drive is generally used for the high resolution positioning system. But high thrust distortion and imbalance in LPM make torque ripple that cause position error in microstep drive. In this paper the new control method is proposed and applied to hybrid LPM which is made by KERI. In the experimental results. it is shown the validity of the proposed control scheme.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.307-309
• /
• 2024

세계적으로 물류 자동화 시장은 2026년까지 약 44조원으로 예상되며, 연평균 10.6%의 성장률을 기록할 것으로 예측된다. 특히 국내 시장은 2025년까지 연평균 성장률 11.5%로 1조원 이상으로 전망되고 있다. 2025년까지 물류 자동화 시장은 270억 달러로 급성장할 것으로 예상되며, 반도체 분야에서 로봇이 상품 입고, 보관, 상품 피킹, 분류, 출고 작업을 담당하는 트렌드가 강조된다. 본 논문은 반도체 물류 분야를 대상으로 작은 크기와 민첩성을 갖춘 로봇을 개발하여 작업 공간을 효율적으로 활용하고 인력을 최소화하려는 목적이다. 수직 및 수평 로봇은 효율적인 자동화 시스템을 제공하며, UI를 사용하여 AGV, 선반, 스카라 로봇을 하나의 통합 시스템으로 개발하고자 한다. 특히 코드 인식, 초음파 센서, 아두이노 MCU, 스카라 로봇, AGV 등을 활용한 로봇 시스템을 개발하여 반도체 물류 작업을 효율적으로 수행하고자 한다. 다양한 분야에서 활용 가능한 스카라 로봇을 개발하기 위해 마이크로 스텝과 풀리, 타이밍 벨트를 이용한 구동 방식 등을 채택한다. 반도체 물류 센터에서의 자동화는 물류 공간의 확대와 인건비 절감을 기대할 수 있으며, 로봇 및 드론을 활용하여 인건비 절감과 효율성 향상을 통해 기업 비용 절감에 기여할 것으로 예상된다.

• Journal of Platform Technology
• /
• v.8 no.1
• /
• pp.24-32
• /
• 2020

This paper designed and manufactured a chip mounter based on 3D printer technology that can be used for educational research or sample production to disseminate chip mounter, a core technology of SMT line. A stepper motor with open loop control is used for low cost drive design. The shortcomings of the motor's vibration and disassembly caused by the use of the step motor were compensated by the Micro-Step control method. In the chip mounter experiment, the gerber file was generated on the small chip mounter, printed at the actual size, and the solder cream was printed on the HASL-treated PCB in the same manner as the sample board fabrication. As a result of the experiment, unlike the 2012 micro components, parts such as SOIC and TQFP that require correction are twice as long as the component mounting time, but it can be confirmed that they are mounted relatively accurately. In addition, as a result of repeatedly measuring the error of the initial position 10 times, it was confirmed that a relatively small error of about 0.110mm occurs.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.49-57
• /
• 2004

In This paper the embedded linux based embedded control system was used and the tracking antenna system was studied for data link and communication between moving vehicles. A microprocessor based embedded controller is equipped with SA-1110 board and this embedded controller can control the azimuth and the elevation angle of the antenna. The relative position and attitude for pointing are calculated by using the GPS position signals from the moving vehicle. To verify the performance of the designed embedded antenna system, the orbit information of the Arirang satellite(from KARI) is used.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.19-25
• /
• 2008

In this paper, author proposes a novel step-up AC-DC chopper operated with power factor correction(PFC) and with high efficiency. The proposed chopper behaves with discontinuous current control(DCC) of input current. The input current waveform in the proposed chopper is got to be a discontinuous sinusoid form in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity and the control method is simple. In the general DCC chopper, the switching devices are turned-on with the zero current switching, but turn-off of the switching devices is switched at current maximum value. To achieve a soft switching of the switching rum-off, the proposed chopper is used a new partial resonant circuit. The result is that the switching loss is very low and the efficiency of chopper is high.