• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1011-1016
• /
• 2001

In this paper, a narrow-band bandpass filter using microstrip open-loop resonators with coupled and crossing lines is designed and fabricated. This filter has many advantages such as compact in size, low weight and the characteristic of the elliptic-function narrow-band bandpass filtering. The configuration consists of two identical microstrip open loop resonators, coupled line and crossing line. By using open loop resonators, the size of the filter can be reduced about 50% compared with the ring resonators. A crossing line gives two notchs in the stopband, which have sharp selectivity in the passband. Centered at 2.455GHz, the calculated microstrip bandpass filter shows a bandwidth of 1.22%, which makes it very attractive for application in the wireless LAN. The filter is fabricated by photo-etching process. The fabricated bandpass filter shows that the bandwidth is 0.85% for 2.458GHz and the size is only $2.6cm\times1cm$.

• Optical Science and Technology
• /
• v.14 no.2
• /
• pp.17-18
• /
• 2010

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.71-74
• /
• 2000

본 논문에서는 무선LAN용으로 사용할 수 있는 마이크로 스트립을 이용한 대역동과 필터를 설계하였다. 기존의 링이나 square loop의 구조를 이용한 공진기와는 다르게 cross loop 와 meander loop의 구조를 이용한 공진기를 혼합한 형태로써 크기가 상당히 줄어든 새로운 구조와 BandPass Filter를 설계하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9B
• /
• pp.1196-1202
• /
• 2001

본 논문에서는 대역통과 필터특성을 위해 통과대역의 상단과 하단의 저지대역에서 감쇄극을 갖는 두 종류의 새로운 마이크로스트립 구조를 제안한다. 이 구조는 TEM모드의 유전체 공진기를 마이크로스트립선로에 용량성 또는 유도성의 병렬 포스트와 연결하여 구성된다. 제안한 구조에 대한 등가회로를 추출하였다. 이 구조의 S-파라미터를 실험과 등가회로 시뮬레이션으로 구하였고, 그리고 유도성포스트의 경우는 3D-FDTD 계산을 추가하여 서로를 비교하였는데 등가회로 모델이 이들 결과와 매우 잘 일치하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.396-396
• /
• 2000

Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is $TE_{01{\delta}}$ mode.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.36-43
• /
• 2000

Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is TE$_{01{\delta}}$ mode.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.5
• /
• pp.42-48
• /
• 1979

In this paper, it is shown that a microwave frequency discriminator can be realized by use of a simple ring resonator. Its characteristics have been analyzed by employing Green's function and verified experimentally. The maximum frequency bandwidth obtained from the experiments is 45MHz at S-band(center frequency 50=3GHz).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.25-30
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectanglar Split Ring Resonator (R-RSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. the size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.22-27
• /
• 2007

In this paper, a novel voltage-controlled oscillator (VCO) using the microstrip square open loop split ring resonator (OLSRR) is presented for reducing the phase noise. For this purpose, the square-shaped split ring resonator (SRR) haying the form of the microstrip square open loop is investigated. Compared with the microstrip square open loop resonator, the microstrip square OLSRR has the larger coupling coefficient value, which makes a higher Q value, and has reduced the phase noise of VCO. The VCO with 1.7V power supply has the phase noise of $-120\sim-116.5$ dBc/Hz @ 100 kHz in the tuning range, $5.746\sim5.854$ GHz. The figure of merit (FOM) of this VCO is $-200.33\sim-197$ dBc/Hz @ 100 kHz in the same tuning range.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.56-60
• /
• 2009

In this paper, a novel voltage controlled oscillator (VCO) has been presented by using the microstrip square multiple spiral resonator for reducing the phase noise of VCO. The microstrip multiple square resonator has the large coupling coefficient value, which makes a high Q value, and has reduced phase noise of VCO. The VCO with 1.8 V power supply has phase noise of -115.0~-117.34 dBc/Hz @100 kHz in the tuning range, 8.935~9.4 GHz. When it has been compared with microstrip square multiple spiral resonator and coventional spiral resonator, the reduced Q value has been -32.7 dB and -57.6 dB respectively. This low phase noise VCO could ve available to a VCO in X-band.