• 제어로봇시스템학회지
• /
• 제12권2호
• /
• pp.34-38
• /
• 2006

• 한국유체기계학회 논문집
• /
• 제12권3호
• /
• pp.31-37
• /
• 2009

This paper presents a implantable intrathecal drug infusion pump for pain control in cancer patients. This device consists of micropump module, drug reservoir module and control module. The micropump module using cam-follower mechanism composed of small-sized four cams and four followers. Each followers is driven by a cam and liquid is discharged by a sequential reciprocal motion of the followers. The advantage of this structure is that it allows the pump to be clean and valveless. The drug reservoir module composed of drug chamber, gas chamber and diaphragm. The control module composed of battery, wireless communication unit and controller. To design a small-sized, low power pump some analysis were performed to determine the design parameters. To verify the feasibility of the experiment, a prototype was manufactured and its operating characteristics were investigated. Experimental results were in accordance with the expected results obtained from analysis.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.378-385
• /
• 2004

Viscous-driven pumping is a very promising type in microscale applications. However, there exist a few disadvantages such as low efficiency and small volume flow rate. In the present study, a pump with tandem rotating cylinders and its optimum synthesis are proposed fur enhancing pumping performance. First, using an unstructured grid CFD method, we investigate the effects of geometrical parameters and then the performance of the pump with tandem cylinders is evaluated. Next, an optimum design synthesis tool is constructed by combining the aforementioned CFD analysis model with the mathematical optimization model, namely, Modified Method of Feasible Directions (MMFD). This technique is used to optimize the geometrical parameters of the pump, fur maximizing pumping efficiency. From the optimization results, it is believed that the present optimum synthesis is robust and has a potential fur other microfluidic device design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3104-3109
• /
• 2007

The present study has been carried out to investigate the pumping characteristics for different figures of inlet and outlet in diffuser/nozzle based on piezoelectric micropump. Piezoelectric micropump system consists of several parts like a pumping chamber, diffuser/nozzle, piezoelectric element and tubes. Parts of the micropump connected with diffuser/nozzle and tubes have been analyzed.. The magnified parts have been classified into two different models based on their resistance. These models have been further classified into six models with each one having three different angles at the magnified parts. Each model has been compared and analyzed using the simulation tool, namely, CFD-ACE depending on their flow rates and characteristics.

• 설비공학논문집
• /
• 제23권1호
• /
• pp.23-31
• /
• 2011

An analysis has been conducted of the flow characteristics and pumping performance of a thermopneumatic micropump with electrically conducting fluid. In the present study, considered is a thermopneumatic micropump for electrically conducting fluids with electromagnetic resistance alternately exerted at the inlet and outlet by alternately applied magnetic fields. A model of Prescribed Deformation is used for the motion of the membrane. Here, the pumping performance of the micropump and flow characteristics of the electrically conducting fluid are investigated in the range of Hartmann number less than 30. The current numerical study shows that the net flow rate through the micropump is almost proportional to the strength of the applied magnetic field.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.350-357
• /
• 2006

A new valveless micropump for bi-directional application has been developed and tested. The micropump was fabricated on silicon and glass substrates by micromachining process. The micropump in this study consists of a membrane actuator, a pumping chamber, fluidic channels and two piezoelectric ceramic films. The channels and pumping chamber were etched on a glass wafer and the membrane was made on a silion wafer which is actuated by a piezoelectric ceramic (PZT) film. The geometry of the micropump was optimized by numerical analysis and the performance of the micropump was investigated by the experiments. The maximum flow rate was $323{\mu}L/min$ and the maximum back pressure was 294 Pa when the membrane actuator of $10{\times}10mm^2$ was driven at 130 Hz and 385 V.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1851-1856
• /
• 2008

A numerical program based on computational fluid dynamics has been developed to simulate characteristics of an EHD induction micropump. The ambiguity of boundary conditions was removed by adopting an equation formulated for electric potential as the dependent variable. The calculations show that the dependency of frequency agrees well with the experiments and the previous analysis. The instability, caused by backflows, is getting stronger as the channel depth increases, which is consistent with experiments. The present study reveals that it is due to the limit in the penetration depth which the electric field can affect. Despite the disadvantage of large channel depth, there is a certain optimal depth for the maximum flow rate.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1256-1261
• /
• 2003

Since the viscous effect increases as the size of device decreases, viscous-driven micropump is a promising mechanism in microscale applications. In the present study, a dual-rotor type pump which contains two counter-rotating cylinders for improving performance characteristics is proposed. First, for flows in the single-rotor type pump, the present unstructured grid simulation method is validated by comparing its results to the previous results. Next, the performance of the dual-rotor type pump is evaluated by the parametric studies and is compared to that of the previous single-rotor type pump. The flow characteristics are qualitatively similar to those of single-rotor type pump. However, the performance of the micropump with tandem rotors is still better than that of previous pumping type, e.g. much larger flow rate, smaller driving region, higher efficiency, and wider operation range.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.49-52
• /
• 2007

마이크로 인공위성에 적용 가능한 마이크로 추력기를 개발하기 위해서는 우주환경을 모사할 수 있는 진공설비가 요구된다. 본 논문에서는 $10^{-5}$ torr의 진공도를 유지할 수 있는 진공설비를 구축하였고, 이 장비는 $100{\sim}120km$의 고도를 모사할 것으로 기대된다. 실제 장비운용에 앞서 사용할 펌프의 성능을 예측하고 저진공 펌프를 작동시켜 이론에 의한 예상 진공도와 실험을 통한 진공도를 비교 분석하였다.

• 설비공학논문집
• /
• 제16권8호
• /
• pp.707-713
• /
• 2004

A numerical analysis has been conducted for flow characteristics of piezoelectric micropumps. In the present study, FSI (Fluid-Structure Interaction) model and grid deform model have been employed for each of two different geometries of the micropumps with two different frequencies in the piezoelectric diffuser/nozzle based micropumps. The displacement of piezo disk and flow rates have been closely examined at the inlet and outlet. It has been found that the motion of the piezo disk investigated with FSI model is not in accordance with that with grid deform model. The results show that the time averaged flow rate calculated with FSI model is larger than that with grid deform model. This study presents the performance analysis of piezoelectric micropumps with two different numerical models for different types of pumps.