• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.439-444
• /
• 1996

0.15(B $a_{0.95}$ S $r_{0.05}$)O-0.15(S $m_{2(1-x}$/N $d_{2x}$) $O_{3}$-0.7Ti $O_{2}$(x=0-10[m/o]) ceramics were fabricated by mixed oxide method. Microwave dielectric properties were investigated with contents of N $d_{2}$ $O_{3}$. In the case of specimen with N $d_{2}$ $O_{3}$(6[m/o]), dielectric constant, quality factor and temperature coefficient of resonant frequency were 78.14, 2938(at 3[GHz]) and +14.19[ppm/.deg. C], respectively. By comparison its properties with undoped specimen, dielectric constant and quality factor were highly improved, but the temperature coefficient of resonant frequency was increased to positive value......

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.775-779
• /
• 1998

The resonant frequency fo and unloaded quality factor Qu of CoTi-substituted Barium ferrites($\textrm{BaCo}_{x}\textrm{Ti}_{x}\textrm{Fe}_{12-2x}\textrm{O}_{19}$, $1.0\leq\textrm{x}\leq5.0$) were measured at frequencies between 5 to 10GHz using the paralleled copper-plate wave guide method. The measurements showed that the permittivities of CoTi-substituted Barium ferrites(CoTi-BF) increased from 14.7 to 23.4 with the contents of CoTi, x, and the loss tangents had values of $\textrm{10}^{-3}$ order. From these results, CoTi-BF are considered to be very promising materials in microwave devices such as dielctric resonator antennas.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.508-517
• /
• 2004

We described a near-field scanning microwave microscope which uses a high-quality dielectric resonator with a tunable screw. The operating frequency is f=4.5 5GHz. The probe tip is mounted in a cylindrical resonant cavity coupled to a dielectric resonator We developed a hybrid tip combining a reduced length of the tapered part with a small apex. In order to understand the function of the probe, we fabricated three different tips using a conventional chemical etching technique and observed three different NSMM images for patterened Cr films on glass substrates. We measured the reflection coefficient of different metal thin film samples with the same thickness of 300m and compared with theoretical impedance respectly. By tuning the tunable screw coming through the top cover, we could improve sensitivity, signal-to-noise ratio, and spatial resolution to better than $1{\mu}m$. To demonstrate the ability of local microwave characterization, the surface resistance of metallic thin films has been mapped.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.5
• /
• pp.217-222
• /
• 2007

Microwave dielectric properties of $(1-x)CaWO_4-xYNbO_4$ ceramics have been investigated as a function of $YNbO_4$ content($0.05{\leq}x{\leq}0.4$). A single phase with tetragonal scheelite structure was obtained up to x=0.10 and then the secondary phase with fergusonite structure was increased. With the increase of $YNbO_4$ content, apparent densities of the specimens were decreased. This results were due to the lower theoretical density of $YNbO_4(5.581g/cm^3)$ than that of $CaWO_4(6.117g/cm^3)$. Dielectric constant(K) and quality factor(Qf) were decreased with $YNbO_4$ content which could be attribute to the decrease of density and the increase of secondary phase. Temperature coefficient of resonant frequency (TCF) of the specimens with the $YNbO_4$ content was depended on dielectric mixing rule.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.872-876
• /
• 1997

(1-x)CaTi $O_{3}$-xLa(Z $n_{1}$2/ $Ti_{1}$2/) $O_{3}$의 마이크로 유전특성을 조사하였다. x가 증가함에 따라 비유전율과 공진주파수의 온도계수는 감소하였으며, Qㆍ $f_{0}$는 증가하였다. 그 결과 x=0.5인 (C $a_{0.5}$L $a_{0.5}$)( $Ti_{0.75}$Z $n_{0.25}$) $O_{3}$의 조성에서 $\varepsilon$$_{r}$=51, Qㆍ $f_{0}$=38,000 (at 7 GHz), $\tau$$_{f}$=+5ppm/$^{\circ}C$의 유전특성이 나타났다. (C $a_{0.5}$L $a_{0.5}$)( $Ti_{0.75}$Z $n_{0.25}$) $O_{3}$조성의 소결온도를 저하시키기 위하여 B $i_{2}$ $O_{3}$를 주조성으로한 소결체를 첨가하여 소결 및 유전특성을 조사하였다. 1wt% 0.76B $i_{2}$ $O_{3}$-0.24NiO가 첨가된 경우 소결온도는 15$0^{\circ}C$ 낮아졌으며, 비유전율 ($\varepsilon$$_{r}$), 공진주파수의 온도계수($\tau$$_{f}$), Qㆍ $f_{0}$가 각각 50+5ppm/$^{\circ}C$, 35,000인 마이크로파 유전특성이 얻어졌다. 또한 3wt%의 0.76B $i_{2}$ $O_{3}$-0.24NiO가 첨가된 경우 소결온도는 20$0^{\circ}C$ 저하되었고, 비유전율 ($\varepsilon$$_{r}$)과 공진주파수의 온도계수 ($\tau$$_{f}$)는 변하기 않았으나, Qㆍ $f_{0}$값이 38,000에서 25,000으로 저하되었다. 25,000으로 저하되었다.되었다.되었다.되었다.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.274-283
• /
• 1997

These days, according to surprising development of communication enterprises, every soft of devices is getting smaller and cheaper. Among these Devices, microwave dielectric ceramics are studied and progressed briskly as the materials of dielectric resonator. Dielectric properties of BaO-S $M_{2}$ $O_{3}$-Ti $O_{2}$, one of the BaO Lnsub 2/ $O_{3}$-Ti $O_{2}$ (Ln=La, Sm, Nd, Pr…) system, synthesized by solid-reaction and coprecipitation method were investigated. Disk-type samples were sintered at 1250-1400.deg. C for 2hrs. As a result, single phase was not synthesized in both method. First created the second phase of S $M_{2}$ $Ti_{2}$ $O_{7}$, and then the last phase of $Ba_{3.75}$S $m_{9.5}$ $Ti_{18}$ $O_{54}$, Ti $O_{2}$, and $Ba_{2}$ $Ti_{9}$ $O_{20}$. When the sample was sintered at 1280.deg. C (in solid reaction method) and at 1310.deg. C (in coprecipitation method), it obtained highest dielectric constant (72.96 and 71.70, respectively) and high Q value. Above that temperature, dielectric constant and Q value decreased because of lattice defect according to oxygen vacancies........

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.05a
• /
• pp.82-82
• /
• 1998

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.30.1-30.1
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.32.1-32.1
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.37.1-37
• /
• 2003