• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2015

In this paper, a gas sensor using a modified $90^{\circ}$ hybrid coupler structure with conducting polymer which operates at 2.4 GHz is represented. Conducting polymers are used to the gas sensing material in proposed sensors. The conducting polymer varies its electrical property, such as work function and conductivity corresponding to the certain gas. To verify this variation of electrical property of conducting polymer at microwave frequencies, the conducting polymer is incorporated with the $90^{\circ}$ hybrid coupler structure, and this proposed sensor operates as reflection type variable attenuator and variable phase shifter. The conducting polymer is employed as impedence-variable transmission lines that cause a impedance mismatching between the general transmission line and conducting polymer. The experiment was conducted with 100 ppm ethanol gas at temperature of $28^{\circ}C$ and relative humidity of 85 %. As a result, the amplitude deviation of $S_{21}$ is 0.13 dB and the frequency satisfying ${\angle}S_{21}=360^{\circ}$ is shifted about 2.875 MHz.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.418-422
• /
• 2022

α-pinene is a natural volatile organic compound secreted by coniferous trees to protect themselves from attacks by insects, microorganisms, and viruses. Recently, studies have reported that α-pinene possesses pharmacological effects on various biological reactions such as anxiolytic, sleep-enhancing, anti-nociceptive, and inflammatory activity. Thus, forest bathing has recently received great attention as a novel therapy for treating severe diseases as well as psychological issues. However, appropriate places and timings for effective therapies are still veiled, because on-site monitoring of α-pinene gas in forests is barely possible. Although portable chemosensors could allow real-time analysis of α-pinene gas in forests, the α-pinene sensing properties of chemosensors have never been reported thus far. Herein, we report for the first time, the α-pinene sensing properties of an oxide semiconductor gas sensor based on rhombohedral In₂O₃ (h-In₂O₃) nanoparticles prepared by a microwave-assisted hydrothermal reaction. The h-In₂O₃ nanoparticle sensor showed a high response to α-pinene gas at ppm levels, even under humid conditions (for example, relative humidity of 50 %). The purpose of this research is to identify the potential of oxide semiconductor gas sensors for implementing portable devices that can detect α-pinene gas in forests in real-time.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.150-155
• /
• 2002

SAR 시스템은 능동적 센서로 마이크로파라 불리우는 전자기파를 직접 지상에 보내고 돌아오는 신호의 위상과 진폭을 이용하여 영상으로 나타내는 간섭성 시스템이다. 이러한 영상의 특성으로 인해 날씨나 태양의 유 무에 상관없이 영상을 취득할 수 있는 장점이 있다. 또한, 최근에는 기존의 다중분광 위성영상과의 SAR 영상의 Data Fusion을 통해 지상의 새로운 정성적 정보를 취득하려는 시도 등 나날이 그 활용성이 증대되고 있는 상황이다. 그러나 SAR 영상의 광범위한 활용을 위해서는 먼저 영상의 지형보정이 선행되어야 한다. 따라서 본 연구에서는 SAR 영상의 활용을 위해서 선행되어야 할 지형보정의 알고리즘을 컴포넌트 기반의 프로그램으로 구현하고 대상연구지역에 대한 적용을 통해 그 활용성과 가능성을 보여주고자 한다. 연구대상지역은 ERS-1, ERS-2 SAR로 촬영된 대전광역시와 그 주변지역으로 해당 SAR 영상에 대하여 엄밀지형보정 알고리즘과 경사거리 영상을 지상거리 영상으로 변환하는 알고리즘을 개발하여 적용하였다. 실험결과 공칭해상도 30m의 ERS 영상에 대하여 39.7m(X방향으로 24.5m, Y방향으로 31.3m)의 수평오차를 나타내었으며 경사거리 영상의 지상거리 영상으로의 변환도 원활하게 수행됨을 알 수 있었다. 마지막으로 본 연구를 통해 연구된 모든 알고리즘은 컴포넌트 기반으로 설계하고 구현되어 향후 국내 SAR 처리기술 개발에 있어서 공유할 수 있도록 하였다.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.721-732
• /
• 2016

The accuracy and error characteristics of microwave Sea Surface Temperature (SST) measurements in the Northwest Pacific were analyzed by utilizing 162,264 collocated matchup data between GCOM-W1/AMSR2 data and oceanic in-situ temperature measurements from July 2012 to August 2016. The AMSR2 SST measurements had a Root-Mean-Square (RMS) error of about $0.63^{\circ}C$ and a bias error of about $0.05^{\circ}C$. The SST differences between AMSR2 and in-situ measurements were caused by various factors, such as wind speed, SST, distance from the coast, and the thermal front. The AMSR2 SST data showed an error due to the diurnal effect, which was much higher than the in-situ temperature measurements at low wind speed (<6 m/s) during the daytime. In addition, the RMS error tended to be large in the winter because the emissivity of the sea surface was increased by high wind speeds and it could induce positive deviation in the SST retrieval. Low sensitivity at colder temperature and land contamination also affected an increase in the error of AMSR2 SST. An analysis of the effect of the thermal front on satellite SST error indicated that SST error increased as the magnitude of the spatial gradient of the SST increased and the distance from the front decreased. The purpose of this study was to provide a basis for further research applying microwave SST in the Northwest Pacific. In addition, the results suggested that analyzing the errors related to the environmental factors in the study area must precede any further analysis in order to obtain more accurate satellite SST measurements.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.113-125
• /
• 2012

The estimations of the surface rain intensity and rain-related physical variables derived from two independent Tropical Rainfall Measuring Mission (TRMM) satellite sensors, TRMM Microwave Imager (TMI) and Precipitation Radar (PR), were compared over four different oceans. The precipitating clouds developed most frequently in the warmest sea surface temperature (SST) region of the west Pacific, which is 1.5 times more frequent than in the east Pacific and the tropical Atlantic oceans. However, the east Pacific exhibited the most intense rain intensity for the convective and mixed rain types while the tropical Atlantic showed the most intense rain intensity for all TMI rainy pixels. It was found that the deviation of TMI-derived rain rate yielded a big difference in region-to-region and rain type-to-type if the PR rain intensity value is assumed to be closer to the truth. Furthermore, the deviation by rain types showed opposite signs between convective and non-convective rain types. It was found that the region-to-region deviation differences reached more than 200% even though the selected tropical oceans have relatively similar geophysical environments. Therefore, the validation for the microwave rain estimation needs to be performed according to both rain types and climate regimes, and it also requires more sophisticated TMI algorithm which reflects the locality of rainfall characteristics.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.359-367
• /
• 2008

TRMM TMI data were used to investigate a relationship between physical parameters from microwave sensor and typhoon intensities from June to September, 2004. Several data such as 85GHz brightness temperature (TB), polarization corrected temperature (PCT), precipitable water, ice content, rain rate, and latent heat release retrieved from the TMI observation were correlated to the maximum wind speeds in the best-track database by RSMC-Tokyo. Correlation coefficient between TB and typhoon intensity was -0.2 - -0.4 with a maximum value in the 2.5 degree radius circle from the center of tropical cyclone. The value of correlation between in precipitable water, rain, latent heat, and typhoon intensity is in the range of 0.2-0.4. Correlation analysis with respect to storm intensity showed that maximum correlation is observed at 1.0-1.5 degree radius circle from the center of tropical cyclone in the initial stage of tropical cyclone, while maximum correlation is shown in 0.5 degree radius in typhoon stage. Correlation coefficient was used to produce regressed intensities and adopted for typhoon Rusa (2002) and Maemi (2003). Multiple regression with 85GHz TB and precipitable water was found to provide an improved typhoon intensity when taking into account the storm size. The results indicate that it may be possible to use TB and precipitable water from satellite observation as a predictor to estimate the intensity of a tropical cyclone.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_1
• /
• pp.993-1001
• /
• 2017

Drought is a worldwide natural disaster with extensively adverse impacts on natural ecosystems, agricultural products, social communities and regional economy. Various global satellite observations, including SMAP soil moisture, GRACE terrestrial water storage, Terra and Aqua vegetation productivity, evapotranspiration, and satellite precipitation measures are currently used to characterize seasonal timing and inter-annual variations of regional water supply pattern, vegetation growth, drought events, and its associated influence ecosystems and human society. We suggest the satellite monitoring system development to quantify meteorological, eco-hydrological, and socio-ecological factors related to drought events, and characterize spatial and temporal drought patterns in Korea. The combination of these complementary remote sensing observations(visible to microwave bands) provide an effective means for evaluating regional variations in the timing, frequency, and duration of drought, and availability of water supply influencing vegetation and crop growth. This integrated drought monitoring could help national capacity to deal with natural disasters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.279-285
• /
• 2017

In this paper, the resonator with a parallel plate capacitor is newly proposed around sub-microwave frequency band and applied to earlobe for non-invasive glucose monitoring the human biological tissue. The capacitor including the earlobe as dielectric material is connected to inductive slot in the ground plane of the microstrip line. Based on the simulation, one port resonator circuit is designed and fabricated as a prototype. Three step glucose concentration levels(0, 250, 500 mg/dL) was tested, and its reflection coefficients($S_{11}$) were measured. Owing to high Q resonator more than 100, resonant frequency shift of about 9 MHz per glucose level of 250 mg/dL has been successfully measured. This proves that the proposed sensor is applicable to a blood glucose sensor.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2017

The SAR payload of the KOMPSAT-5 is equipped with an X-band (9.66GHz) microwave-based sensor. Especially, since it has a fixed antenna that can be electronically steered with respect to the azimuth and elevation planes, various applications are expected. This study evaluates the production performance and the accuracy of the DEM by producing DEM using the HR and UH mode images of KOMPSAT-5. To evaluate the production performance of the DEM, the sensitivity of DEM was assessed through a baseline analysis and $2{\pi}$ ambiguity; it was found to have good production performance. In addition, to evaluate the accuracy of the produced DEM, 30 check points were compared with SRTM data. As a result, STDEV ${\pm}15-20m$ accuracy was obtained. If the accuracy of the DEM is improved by adjusting the parameters of the filtering method or phase unwrapping method in the future, it will be possible to widely use the KOMPSAT-5 image for environmental and disaster monitoring.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.