• Journal of Advanced Marine Engineering and Technology
• /
• 제15권2호
• /
• pp.53-63
• /
• 1991

This study suggests a new type shaft generator driven by hydraulic power suitable for small size vessels. Since the shaft generator system is very easy to be affected by disturbances such as speed variation of main engine and load variation of the generator, a robust servo control must be implemented to obtain stable electric power with constant frequency. Thus, in this study two types of controller design method-the reference following optimal control method and robust servo control method-are adopted to the controller design. In the experiment, static and dynamic characteristics of the shaft generator system according to the variation of input frequency setting, the speed variation of the pump and the load variation of the generator are investigated. From the considerations on the computer simulation results and experimental results, it is ascertained that the shaft generator system proposed in this study has good control performances.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.223-228
• /
• 1992

This study was conducted to develop an electro-hydraulic three-point hitch control system using an electro-hydraulic servo valve and microcomputer and to investigate the performance of the three-point hitch control system through indoor and field experiments. 1. The results from indoor experiments coincided with those from computer simulation reported in the previous paper. However, the draft control with the value 4 of Kd showed a slight sustained oscillation after it reached the draft set. 2. From the field experiments, it appeared that the RMS errors increased with the ground speed of tractor. In position control, the three-point hitch control system with electro-hydraulic servo valve showed better performance than that with on-off electro-magnetic valve in the ground speed less than 1.6 m/s. In draft control, however, there was no significant differece in performance between those two systems. 3. In depth control, the both types of electro-hydraulic three-point hitch control system showed better performance than the conventional mechanical-hydraulic three-point hitch control system.

• 한국도서관정보학회지
• /
• 제16권
• /
• pp.99-128
• /
• 1989

The purpose of this study is to examine the problems of the each cataloging rules about the physical description area that generated the greatest controversy in the cataloging of microcomputer software, and to suggest solutions of these problems. The results of the study can be summarized as follows: 1. Because the physical description area of materials is to identify the physical attributes of the carrier, file description might better described in the material specific details area. 2. Integrated software that related file is linked together need to be used terms that represented any type of software 3. It is desirable that the term 'computer' is to be used as a modifier to devide the carrier of microcomputer and other non book materials. 4. System requirements would better described in a note area rather than physical, description area. 5. It is desirable that other physical details such as recording density, tracks, etc., is to describe in the physical description area, since such information is to represent specifics of the carrier.

• 대한의용생체공학회:의공학회지
• /
• 제12권4호
• /
• pp.303-308
• /
• 1991

Computer assisted cardiac mapping system has made it possible to display local activation times of the heart using a simultaneous multi-point data aquisition system, and opened an era in electrophyslology guided cardiac arrhythmia surgery especially in ventricular tachycardia. In this study, we have developed a 64 channel computerized cardiacmapping system us:ng a micro-computer for basic reasearch of electrophysiology and electrical propagation in cardiac arrhythmias. The significant tasks of this study were the simultaneous acquisition of large amount of data from 64 sites, accurate and rapid analysis, and the effective display of the analyzed data. To solve these problems, we made a 64 channel signal pre-processing board in order to amplify and fitter the raw signals. And we developed the soflu'are Yor cardiac isochronous mapping whictl is presented immediately ama computer-generated graphics. This system is expected 4o enable us to study pathophyslology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatments for cardiac arrhythmia.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.487-490
• /
• 2004

상황 인식(context-awrare)은 인간-컴퓨터 상호작용의 단점을 극복하기 위한 방법으로써 많은 주목을 받고 있다. 이 논문에서는 SoC(System-on-a-Chip)로 구현될 수 있는 상황 인식 시스템 구조를 제안한다. 제안한 구조는 센서 추상화, 컨텍스트 변경에 대한 통지 메커니즘, 모듈식 개발, if-then규칙을 이용한 쉬운 서비스 구성과 유연한 상황 인식 서비스 구현을 지원한다. 이 구조는 통신 모듈, 처리 모듈, 블랙보드를 포함하는 SoC 마이크로프로세서 부분과 규칙 기반 시스템 모듈을 구현한 하드웨어로 구성된다. 규칙 기반 시스템 하드웨어는 모든 규칙의 조건부에 대해 매칭 연산을 병렬로 수행하고, 규칙의 결론부는 마이크로프로세서에 내장된 행위 모듈을 호출함으로써 작업을 수행한다. 제안한 구조의 SoC 시스템은 SystemC SoC 개발 환경에서 설계되고, 성공적으로 테스트되었다. 제안한 SoC 기반의 상황 인식 시스템 구조는 주거 환경에서 컨텍스트를 인식하여 노인을 보조하는 지능형 이동 로봇 등에 적용될 수 있을 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.540-545
• /
• 1988

In this study a microcomputer-aided design program has been developed to design and analysis for the digital adaptive control system. DACS(Digital Adaptive Control System) program has been written in GWBASIC language which is suitable for IBM-PC compatible. The dynamics of each element was modulized and described by linear difference equations. By the aid of this program, sampling time, the number of bits of A/D and D/A converter and the stability for the digital adaptive control system can be determined. In order to estimate the system parameters an on-line identification and a regression analysis method are utilized. The simulation results have been well agreed with the experiments. To demonstrate the utility of this program, an adaptive control system has been designed for air-heating system.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.1-6
• /
• 1984

본 논문에서는 시뮬레이션에 의하여 R2 MFC 디지탈 수신기의 구성을 위한 알고리즘을 선택하고 평가하였다. 이러한 알고리즘은 CCITT 규정을 만족함을 보여 준다. 또한 PCM 화한 신호를 수신하여 유효한 주파수 성분을 검출할 수 있는 개선된 회로를 디지탈 신호 처리 소자(S2811)를 이용하여 제시하였다. 마이크로컴퓨터 Altair 8800b를 이용하여 시뮬레이션한 결과, 주어진 잡음, 주파수 편이 및 진폭 왜곡 등에 대한 특성이 허용치내에 들어옴을 보여 주었다.

• 한국의학물리학회지:의학물리
• /
• 제3권1호
• /
• pp.19-24
• /
• 1992

마이크로 프로세서를 이용하여 8채널 방식의 선량측정장치를 구성하여 방사선 치료시 환자의 부위별 선량측정 및 밀봉선원을 이용한 치료에서의 선량분포와 뇌정위적 방사선 수술에서의 선량 측정에 이용할 수 있도록 하였다. 본 연구에서는 방사선 검출소자에 상용 반도체도 이용할 수 있도록 하는데에도 목적을 두고 여러개의 검출소자의 신호를 실시간 계측이 가능토록 하였으며 개인용 컴퓨터의 RS-232C 직렬 포트를 이용하여 본 시스템의 모든 기능을 제어하고 데이타 처리를 하도록 하였다.

• 대한기계학회논문집
• /
• 제5권4호
• /
• pp.274-283
• /
• 1981

An inexpensive and very simple microcomputer-aided measurement system has been designed for on-line experiments, which perform simultaneously data acquisition, data recorditing, calculations with the data, and positioning of necessary sensors. Interfacting between the microcomputer and the data acquisition board which consists of A/D converter, analog multiplexer, and sample-and-holder, etc. has been done through IEEE-488 interface port and parallel user port both provided by the PET computer's main logic board. Data and control signals are transfered between devices without handshaking. By utilizing BASIC commands PEEK, POKE, SYS, USR which are offered by PET microcomputer, it is possible to link machine code subroutines into the main BASIC program. This facilitates ease of data transfer, programming, and speedy execution of the program. In addition, an X-Y scanning table has been concected to the system in order to automatically position measuring sensors along a pre-determined path of interest.

• 마이크로전자및패키징학회지
• /
• 제2권2호
• /
• pp.49-56
• /
• 1995

ATM 교환기에 사용되는 하이브리드 IC에 대해 냉각성능과 전자파 차폐성능을 실 험과 수치해석에 의해 분석하였다. 하이브리드 IC 상부에 전자파 차폐를 위해 부착하는 덮 게의 형상에 따라 냉각공기 유속 0.5~0.4m/sec 조건에서 냉각실험을 하였고 냉각 해석 코 드인 Flotherm으로 컴퓨터 시뮬레이션하여 비교하였다. 그리고 각 덮게의 형상에 따라 30MHz ~1GHz 대혁에 걸쳐 전자파 차폐 실험을 하엿다. 실험결과 냉각 특성의 실험과 수 치해석 결과 잘 일치하였으며 공기 유속을 1.0m/sec 이상으로 유지시키면 덮개 형상에 무관 하게 열적으로 안저하였다. 30~700MHz 영역에서는 덮게로 인한 전자파 차폐효과가 뚜렷하 였으나 700MHz 이후의 대역에서는 접지와 접속되는 리이드의 임피던스 증가로 인하여 차 폐효과가 감소하였다.