• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1263-1266
• /
• 2005

댁내의 제어 네트워크는 냉장고, 세탁기, 전자레인지 같은 가전제품과 전등, 가스 경보기, 보일러 등에서 제품 고유의 기능을 수행하기 위하여 일반적으로 8Bit 이하의 비교적 저 기능의 마이컴을 채용하고 있으며 각각의 통신을 위한 각 기기 고유의 통신 프로토콜을 가지고 있다. 이렇게 각각 다른 통신 방식으로 인하여 실제적으로 하나의 통합된 댁내 제어 네트워크 구성은 매우 어렵다. 이에 기존 제어기기 각각의 프로토콜을 유지한채 모든 제어기기의 프로토콜을 수용할 수 있는 방법은 새로운 프로토콜을 만들어 기존 기기의 프로토콜을 Wrapping 하는 방법이다. 본 논문에서는 기존 제어기기들의 통신 프로토콜을 Wrapping 할 수 있는 통합 프로토콜을 구현하여 하나의 통일된 제어 네트워크를 구성할 수 있도록 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.50-57
• /
• 2011

In this paper, we proposes a new load-sharing algorithm with a ATmega2560 based digital communication. Proposed algorithm is different from conventional analog method. The high speed communication digital control is performed. To apply the digital communication and real-time control for time-sharing token bus method, we implemented high efficient load-sharing and redundancy. Also this system make down the price by auto ID algorithm and system response is improved by controller's voltage and current integral value sharing. In parallel system prototype, each module have controller and performed load-sharing according to master module integral value. In this paper, we verify the validity of proposed algorithm using PSIM program and prototype.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1228-1234
• /
• 2015

In this paper, a fuzzy controller using thermoelectric for temperature environmental tester is developed. The new structure of fuzzy controller based temperature environmental tester is proposed and implemented to maintain a stable temperature and improve temperature change speed. In order to evaluate the efficiency, an experiment is setup to compare PID controller with our proposed controller. The experimental results, we proved that our proposed fuzzy controller has better performance than PID controller.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.4
• /
• pp.166-170
• /
• 2004

In this paper, it has been proposed the simultaneous control of PFC (power factor corrector) and electronic ballast for fluorescent lamp by one chip micro-controller. Boost DC-DC converter is adopted for PFC, and half bridge inverter for electronic ballast. It controls, simultaneously and independently, the boost DC-DC converter and the half bridge inverter. As PFC and electronic ballast are controlled by one chip micro-controller, it is possible to achieve the simpler and the cheaper controller for fluorescent lamp. Experimental results have shown the feasibility of the proposed simultaneous control of PFC and electronic ballast by one chip micro-controller.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.53-59
• /
• 2009

By the use of open source and 16bit Microcomputer, IDB(Integrated Development Board) for embedded technical education was designed and developed. Based on 16bit MCU H8/300H, LED, LED Matrix, motors, sensors and various I/O circuitry, and the connection to a computer via the SCI, and $16{\times}2$ character LCD was designed and implemented on IDB. In addition, the software development environment was build by the assembler and H8 C compiler which is provided to the open-source software. And memory expansion was considered to include TRON(Real time OS) and uClinux. To verify the developed board, IDB was fabricated by PCB machine, and the fuction was confirmed by the basic I/O control program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.