• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.872-898
• /
• 2007

Pantograph sliding plate abrasion auto-detect system, one of the electric rail car auto-detecting devices, is a system that decides how much abrasion and when to replace without an inspector physically looking at the abrasion on the wet plate using machine vision, a cutting-edge technology. This paper covers the cause of deteriorating reliability that affects pantograph wet plate edge detection due to noise added to the video when it rains. In order to remove such noise, problems should be checked through Smoothing, Averaging mask and Median filter using filtering technique and stable edge detection without being affected by noise should be induced in video measurement used in machine vision technology.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.133-136
• /
• 2006

한정된 네트워크 대역폭을 가진 현재의 인터넷에서 영상의 품질을 향상시키기 위해 영상의 비트율을 높이는 것은 비용 등 여러 가지 문제로 인해 현실적으로 많은 어려움이 있다. 따라서 비록 충분하지 못한 비트율의 영상을 전송받더라도 전송받은 영상의 화질을 높이는 연구가 다양한 방법으로 진행되고 있다. 영상의 화질을 향상시키는 많은 방법 중 후처리 기법은 이러한 잡음을 효과적으로 제거 할 수 있으면서 동영상 압축 표준 복호기를 수정할 필요가 없기 때문에 좋은 해결책이 된다. 동영상의 압축 과정에서 낮은 비트율로 인해 발생하는 화질 열화 현상 중에 쉽게 완화 할 수 있고, 영상의 질이 비용 대비 높은 효율로 좋아지는 대표적인 현상이 블록화 현상이다. 일반적으로 블록화 현상은 영상의 고주파대역에서 나타나므로 본 논문에서 영상의 고주파 성분과 블록화 현상을 구분하기 위해 Sobel 마스크를 사용한다. 구분된 블록화 현상이 발생한 매크로블록의 양쪽 경계면에 4-tap 저주파 통과 필터를 사용하여 블록화 현상을 효과적으로 완화할 수 있다. 개선된 영상의 화질 평가 기법으로 신호처리 분야에서 많이 사용되는 객관적인 지표인 PSNR에 의한 평가와 함께 실제 인간의 시각을 기준으로 주관적이고 감성적인 관찰에 의한 평가를 함께 수행한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.346-351
• /
• 2006

본 논문은 콘크리트 표면 균열 영상에서 균열의 특징을 추출하기 위해, 영상 처리 기법을 적용하여 균열의 특징(길이, 폭, 방향)을 자동으로 추출 및 처리 할 수 있는 기법을 제안한다. 본 논문에서 적용된 영상 처리 기법으로는 균열 영상의 빛을 보정하기 위하여 모폴로지 기법인 채움(Closing)기법을 적용한다. 균열의 경계를 명확히 추출하기 위하여 고주파 강화 필터링을 적용한 후, 8가지 색상(검정, 빨강, 파랑, 초록, 노랑, 자주, 주황, 하늘)으로 명암 값을 분류하고 그 중 빈도수가 가장 높은 색상을 가진 명암 값을 제거한 후에 추출한 영상을 이진화한다. 이진화된 영상에서 콘크리트 표면 균열의 실거리 측정을 위한 임의의 선을 제거하기 위하여 위치 히스토그램을 적용하여 임의의 선을 제거한다. 임의의 선이 제거된 균열 영상에서 $5\times5$ 마스크를 적용하여 균열을 확대시키고, 3차례에 걸쳐 잡음 제거연산을 수행하여 균열의 후보 영역을 선택한 후, 후보 영역으로부터 특정 균열들을 추출한다. 추출된 특정 균열을 모폴로지 기법인 제거(Opening) 연산을 수행하여 균열의 특징이 일정하게 유지되게 하고 미세하게 끊어진 부분을 보정하여 균열의 특징(길이, 방향, 폭)을 측정한다. 실제 콘크리트 표면 균열영상을 대상으로 실험한 결과, 특정 균열이 효율적으로 추출되었고, 특정 균열의 길이, 방향, 폭의 등이 정확히 추출 및 계산되었다.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.613-621
• /
• 2019

The purpose of this study is to evaluate the effectiveness of supportive devices which are for minimizing the patient's movement during lower extremity angiography and to verify image quality of phantom by analyzing of Mask image, DSA image and Roadmap image into SNR and CNR. As a result of comparing SNR with CNR of mask image obtained by DSA technique using the phantom alone and phantom placed on the supportive devices, there was no significant difference between about 0~0.06 for SNR and about 0~0.003 for CNR. The study showed about 0.11~0.35 for SNR and 0.016~0.031 for CNR of DSA imaging by DSA technique about only water phantom of the blood vessel model and the water phantom placed on the device. Analyzing SNR and CNR of Roadmap technique about water phantom on the auxiliary device (hardboard paper, pomax, polycarbonate, acrylic) and water phantom alone, there was no significant difference between 0.02~0.05 for SNR and 0.002~0.004 for CNR. In conclusion, there was no significant difference on image quality by using supportive devices made by hardboard paper, pomax, polycarbonate or acryl regardless of whether using supportive devices or not. Supportive devices to minimize of the patient's movement may reduce the total amount of contrast, exam-time, radiation exposure and eliminate risk factors during angiogram. Supportive devices made by hardboard paper can be applied easily during angiogram due to advantages of reasonable price and simple processing. It is considered that will be useful to consider cost efficiency and types of materials and their properties in accordance with purpose and method of the study when the operator makes and uses supportive devices.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.739-747
• /
• 2015

Masking technique that is most widely known as countermeasure against power analysis attack prevents leakage for sensitive information during the implementations of cryptography algorithm. it have been studied extensively until now applied on block cipher algorithms. Masking countermeasure have been applied to international standard SEED algorithm. Masked SEED algorithm proposed by Cho et al, not only protects against first order power analysis attacks but also efficient by reducing the execution of Arithmetic to Boolean converting function. In this paper, we analyze the vulnerability of Cho's algorithm against first order power analysis attacks. We targeted additional pre-computation to improve the efficiency in order to recover the random mask value being exploited in first order power analysis attacks. We describe weakness by considering both theoretical and practical aspects and are expecting to apply on every device equipped with cho's algorithm using the proposed attack method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2429-2434
• /
• 2010

In this paper, we propose a method to extract and analyze palm line with fuzzy method. In order to extract the palm part, we transform the original RGB color space to YCbCr color space and extract sin colors ranging Y:65-255, Cb:25-255, Cr:130-255 and use it as a threshold. Possible noise is removed by 8-directional contour tracking algorithm and morphological characteristic of the palm. Then the edge is extracted from that noise-free image by stretching method and sobel mask Then the fuzzy binarization algorithm is applied to remove any minute noise so that we have only the palm lines and the boundary of the hand. Since the palm line reading is done with major lines, we use the morphological characteristics of the analyzable palm lines and fuzzy inference rules. Experiment verifies that the proposed method is better in visibility and thus more analyzable in palm reading than the old method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.58-66
• /
• 1999

In this paper, an advanced histogram equalization algorithm for contrast enhancement is presented. Histogram equalization is the most popular algorithm. Global histogram equalization is simple and fast, but its contrast enhancement power is relatively low. Local histogram equalization, on the other hand, can enhance overall contrast more effectively, but the complexity of computation required is very high. In this paper, a low pass filter type mask is used to get a sub-block histogram equalization function to more simply produce the high contrast. The low pass filter type mask is realized by partially overlapped sub-block histogram equalization (POSHE). With the proposed method. the computation overhead is reduced by a factor of about one hundred compared to that of local histogram equalization while still achieving high contrast.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.624-631
• /
• 2018

To meet the requirements of various satellite synthetic aperture radar(SAR) system performance parameters, the characteristics of the antenna pattern should be analyzed. In this paper, we propose a method to improve the SAR system performance using an effective technique for optimizing antenna pattern synthesis in the presence of element failure. The desired antenna pattern can be synthesized by referring to the optimized antenna mask templates using the particle swarm optimization algorithm. In the simulation, the performance of the proposed method is verified by analyzing characteristics related to the SAR system performance parameters using antenna pattern regeneration.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.8-17
• /
• 2008

A new algorithm for automatic extraction of interesting objects is proposed in this paper. The proposed algorithm can be summarized in two steps. First, segmentation of color image that split interesting objects and backgrounds is performed. According to the research stating, 'Humans perceive things by contracting color into three to four essential colors,' a color image is segmented into three regions utilizing k-mean algorithm, followed by annexing the regions when the similarities of them exceeds the critical value based on the calculation of degrees in the histogram similarity, Second, identifying the interesting objects out of the segmented image, partitioned by the image composition theory, is performed. To have a good picture, it is important to adjust positions of interesting objects according to picture composition. Extracting objects is a retro-deduction process using a weighted mask designed upon the triangular composition of picture. To prove the quality of the proposed method, experiments are performed over four hundreds images as well as comparison with recently proposed KMCC and GBIS methods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.20-26
• /
• 2012

The objective of this study is to assess plastic deformation in aluminium alloy by acoustic nonlinearity of laser-generated surface waves. A line-arrayed laser beam made by high-power pulsed laser and mask slits is utilized to generate the narrowband surface wave and the frequency characteristics of laser-generated surface waves are controlled by varying the slit opening width and slit interval of mask slits. Various degrees of tensile deformation were induced by interrupting the tensile tests so as to obtain aluminum specimens with different degrees of plastic deformation. The experimental results show that the acoustic nonlinear parameter of a laser-generated surface wave increased with the level of tensile deformation and it has a good correlation with the results of micro-Vickers hardness test and electron backscatter diffraction (EBSD) test. Consequently, acoustic nonlinearity of laser-generated surface wave could be potential to characterize plastic deformation of aluminum alloy.