• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.134-134
• /
• 2018

반데그라프 발전기는 큰 전위차를 생성하고 입자를 가속시키기 위해 발명된 정전기 발생기이다. 현재 반데그라프 발전기는 사이클로톤의 개발 이후 입자 가속 목적으로 주로 사용되고 있지는 않지만 접촉 전하 생성, 전달, 및 축적을 가능하게 하는 전하 운반 시스템에 기반하여 간단한 구조로 직류를 발생시킬 수 있는 점은 주목할만하다. 특히, 최근 경량성, 고효율 발전 등의 장점으로 에너지 하베스팅 분야에서 많은 관심을 받고 있는 마찰전기 에너지 하베스팅 기술 분야에서는 최근, 높은 에너지 저장 효율을 위해 직류 발생이 가능한 마찰전기 에너지 발전 소자에 대한 연구들이 진행되고 있다. 그러나 전하 운반 시스템을 기반으로 한 마찰 전기 직류 발전기에 대한 연구는 거의 이루어 지지 않았으며, 보고된 몇 연구에서는 저 전류, 고 임피던스 및 저효율과 같은 반데그라프 발전기의 구조적 및 물질적 한계를 극복하지 못했다. 또한 마찰에 의해 발생하는 마모에 의한 출력 감소 또한 해결되지 못한 문제이다. 따라서 뛰어난 마찰전기 특성과 함께 우수한 내마모성을 가지는 폴리머에 기반하여 기존의 한계를 극복 한 전하 운반 시스템 기반 마찰 전기 직류 발전기를 제안한다.

• 기계와재료
• /
• v.25 no.3
• /
• pp.130-136
• /
• 2013

철도차량용 제동장치 성능시험기는 제륜자의 마찰계수, 마모량, 열반점 등의 물리적 성질을 실차와 유사한 환경조건에서 시험을 수행함으로써 제륜자의 연구개발 및 성능평가의 목적으로 활용한다. 제륜자는 차량의 운동에너지를 열에너지로 변환한다. 성능시험기는 철도차량의 주행 운동에너지에 해당하는 관성질량으로부터 회전 운동에너지에 해당하는 관성모멘트를 조성하여야 한다. 공용 시험기에서 각종 철도차량에 대한 관성모멘트를 기계적 관성모멘트인 플라이휠로 모의하기에는 용량도 크고 구조가 복합하여 현실적으로 한계가 있다. 본 연구에서는 기계적 관성모멘트의 한계를 극복하고자 전기적 관성모멘트를 부가적으로 활용하는 기법을 제시하고 이를 적용한 시험기를 소개하고자 한다. 이러한 연구는 시험기의 외형적인 크기를 줄이고 또한 각종 철도차량에서 요구하는 정량적인 관성질량의 모의가 가능하리라고 사료된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.13-13
• /
• 2001

현재 초고속 가공 공구의 국내 시장은 150억원이며 향후 3년 내에 1500억원으로 급성 장활 전망이다. 무윤활 초고속 가공을 실현하기 위해서는 윤활특성이 우수한 초고경도 코팅의 개발이 필요하며 이를 통해 기계설비의 수명향상과 폐유문제 해결을 기대할 수 있다. 기존의 고체윤활 코팅은 초고경도 코팅의 상부에 $MoS_2$, Graphite 등 윤활성 박막을 합성하였으나, 이들은 Hexagonal 구조의 연질 박막이며 수분이 존재하는 대기중에서는 윤활 및 내마모 특성이 급격히 저하된다. 환경친화 대체소재 개발의 일원으로 TiN, ZrN 박막 등이 이미 개발되었고 기계적 특성이 우수하여 널리 응용되고 있으나 아직 경도(약 20GPa 내외) 및 윤활성의 한계 (마찰계수 $\mu=O.6$)를 극복하지 못하고 있다. TiN박막 위의 Cu의 첨가는 TiN의 구조와 성질을 크게 변화시키는 것으로 알려져 있다. 따라서 본 연구에서는 TiN 기지 위에 Cu를 도핑함으로써 경도의 상승을 통환 내구력의 향상과 마찰계수의 감소를 통한 윤활성의 향상을 보고자하였다. TiN합성의 안정화를 위하여 magnetron sputtering과 arc ion pIatingd을 병용한 hybrid 공정을 이용하였다. Cu첨가에 따른 결정 성장 거동의 변화를 보기 위해 XRD 분석을 실행하였고, EDS 분석을 통해 Cu target 전류밀도에 의한 기지내의 Cu의 함량변화를 고찰하였으며, 경도 및 윤활특성을 고찰하기 위해서 경도 시험과 마모 시험(ball-on disc type test)를 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.256-258
• /
• 2016

Domestic vehicle demand is growing steadily. In proportion to the increased interest generated by the automobile-related accidents are more frequent. One of the causes of these accidents are caused by vehicle accidents exists tire problems. Users check tire wear with their naked eyes or check the tread and the wear indicator by using a coin. However, such visual judgment cannot be precise and make it possible to identify the time for tire replacement. Therefore, by utilizing visual and objective data rather than incorrect decisions through objective data, we designed a system that accurately and can easily tell whether the tire condition and replacement of the driver.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.424-426
• /
• 2008

A parametric study was carried out to find the fuel lubrication performance of high speed small rolling element bearings. Both MIL-PRF-7808 turbine oil and JP-8 aircraft fuel were used as the lubricant to compare the operational characteristics. 17 mm inner diameter deep groove ball bearing and 20 mm cylindrical roller bearing were used. A high speed bearing test rig was developed and the testing was done with varying applied load, cooling air temperature, lubricant flow rate, and speed. Fuel caused more cage wear than oil for ball bearing with increasing axial load and rotational speed. The bearing temperature using fuel was lower than that using oil, and this seems to be the result of the high cooling capacity of fuel. According to various tests, the fuel lubrication is applicable for the lubrication on the main shaft bearings of expendable small gas turbines.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.47-54
• /
• 2010

This study is progressed function ratio, it's trued taste by an experiment to present data for human work light weight aggregate development that use clink ash progressed liquid limit, small success limit, wear loss in quantity, sand equivalent, sieve cutting examination. 80:20's match of function rain examination is 1.4, and that use rubble aggregate as recyeled-panit lightweight aggregate's capacity ratio increases by 1.0 increase of function rain many. Also, examination multiplied delicate flavor gradually according to increase of the mixing rate, and absorption coefficient increased. This is judged by phenomenon that appear by special quality upper recycled-panit of polystyrene bid and porosity's increase between lightweight aggregate. It is case that use aggregate of wear loss in quantity is 13.5 in sand equivalent and a wear loss in quantity experiment and although case that mix 20% increases by 14.4, this phenomenon by weak tissue of lightweight aggergate be judged. When it's as a these experiment, the statue prevention floor of a street improvement specifications is prescribing so that satisfy by sand equivalent 20, CBR 10. This is showed result that this satisfies in quality standard all in match experiment ago that see.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.116-125
• /
• 2009

This study is progressed function ratio, it's trued taste by an experiment to present data for human work light weight aggregate development that use clink ash progressed liquid limit, small success limit, wear loss in quantity, sand equivalent, sieve cutting examination. 80 : 20's match of function rain examination is 1.4, and that use rubble Goljae as ckink ash lightweight aggregate's capacity ratio increases by 1.0 increase of function rain many. Also, examination multiplied delicate flavor gradually according to increase of the mixing rate, and absorption coefficient increased. This is judged by phenomenon that appear by special quality upper clink ash of polystyrene bid and porosity's increase between lightweight aggregate. It is case that use aggregate of wear loss in quantity is 13.5 in sand equivalent and a wear loss in quantity experiment and although case that mix 20% increases by 14.4, this phenomenon by weak tissue of lightweight aggergate be judge. When it's as a these experiment, the statue prevention floor of a street improvement specifications is prescribing so that satisfy by sand equivalent 20, CBR 10. This is showed result that this satisfies in quality standard all in match experiment ago that see.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1314-1320
• /
• 2001

DC motors have widely been used in the field of variable-speed driving system since it is easy to control flux and torque of the motors precisely but it is hard to check and maintain those periodically. In addition, there are difficulties in high power and high speed running due to rectifying limit of commutator, and are a lot of restrictions in installation. Therefore, speed control in BLDC(Brushless DC) motors have seriously been studied for a long while. In this paper, a mathematical model of BLDC motor driven by PWM inverter is developed. Dynamics and steady-state characteristics of BLDC motor are simulated and analyzed with a series of experiments for the parameter estimation : torque, speed, phase voltage and current.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.408-413
• /
• 2001

DC motor has widely been used in the field of variable-speed driving unit since it is easy to control flux and torque precisely but it is troublesome to check and maintain periodically. In addition, there are difficulties in hish power and high speed running due to rectifying limit of commutator, and are a lot of restrictions in installation. Therefore, speed control in BLDC(Brushless DC) motor has seriously been studied for a long while. In this paper, a mathematical model of BLDC motor driven by PWM inverter is developed. Dynamics and steady-state characteristics of BLDC motor are simulated and analyzed with a series of experiment for the parameter estimation : torque, speed, phase voltage and current.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.553-581
• /
• 2022

Shortly after tunnel boring machine (TBM) was introduced in the tunneling industry, the use of TBM has surprisingly increased worldwide due to its performance together with the benefit of being safely and environmentally friendly. One of the main cost items in the TBM tunneling in rock and soil is changing damaged or worn cutters. It is because that the cutter change is a time-consuming and costly activity that can significantly reduce the TBM utilization and advance rate and has a major effect on the total time and cost of TBM tunneling projects. Therefore, the importance of accurately evaluating the cutter life can never be overemphasized. However, the prediction of cutter wear in soil, rock including mixed face is very complex and not yet fully clarified, subsequently keeping engineers busy around the world. Various prediction models for cutter wear have been developed and introduced, but these models almost usually produce highly variable results due to inherent uncertainties in the models. In this study, a case study of design and construction of disc cutter change is introduced and analyzed, rather than proposing a prediction model of cutter wear. As the disc cutter is strongly affected by the geological condition, TBM machine characteristic and operation, authors believe it is very hard to suggest a generalized prediction model given the uncertainties and limitations therefore it would be more practical to analyze a real case and provide a detailed discussion of the difference between prediction and result for the cutter change. By doing so, up-to-date idea about planning and execution of cutter change in practice can be promoted.