• Title/Summary/Keyword: 마모율

검색결과 228건 처리시간 0.025초

타이어 마모에 영향을 미치는 가혹도 인자 (Severity Factors Affecting Tire Wear)

  • 이재우;정창복;최인창
    • 폴리머
    • /
    • 제29권1호
    • /
    • pp.48-53
    • /
    • 2005
  • 타이어 마모는 자동차 드라이버들의 주요 관심 사항 중의 하나일 뿐만 아니라 타이어의 수명과 밀접하게 관련되어 있다. 자동차 타이어의 사용 조건들은 여러 가지 요인들이 함께 작용하기 때문에 타이어 마모에 대해 명확하게 규명하는 것은 쉽지 않다. 따라서, 타이어 마모를 평가하기 위해서는 실제 사용 조건에서의 마모 평가가 필요하다. 타이어의 수명과 밀접한 관련이 있는 마모를 평가하기 위하여 정해진 가혹한 주행 조건을 갖는 dedicated test를 통하여 마모 성능 시험을 실시하였다. 타이어 마모에 영향을 미치는 많은 인자들을 단순화시키기 위하여 정해진 운전자의 가혹도로 시험함으로써 운전자의 운전 습관에 따른 영향을 최소화하였다. 마모와 관련이 있는 노선 가혹도의 영향을 확인하기 위하여 노선 별로 횡가속도를 측정하여 얻어진 driving severity number(DSN)을 이용하여 DSN에 따른 타이어의 마모율과 마모 양상에 대해 비교해 보았다. 이러한 dedicated treadwear test 결과를 제공함으로써 타이어 마모 성능을 만족시키기 위한 설계에 유용한 자료를 제공할 수 있다.

도로터널에서 지보패턴별 굴착지수 상관관계 고찰 (Correlation Between Drilling Parameter and Tunnel Support Pattern Using Jumbo Drill)

  • 김낙영;김성환;정형식
    • 한국터널지하공간학회 논문집
    • /
    • 제3권4호
    • /
    • pp.17-24
    • /
    • 2001
  • 본 연구에서는 시공여건이 유사한 도로터널 4개소을 선정하여 실내시험 및 막장지질조사를 실시하였고 그 결과와 점보드릴을 활용하여 얻을수 있는 비트마모율과 굴착지수의 상관관계를 지보패턴별로 분석하였다. 연구대상 4개 도로터널에 대한 평균비트마모율은 지보패턴별로 11.85%에서 3.25%로 차이를 보였고 굴착지수는 주로 파쇄대의 발달정도에 따라 변동이 발생하였다.

  • PDF

경도의 차이에 따른 재료들의 비윤활 미끄럼 마모에 대한 연구 (A Study of Unlubricated Sliding wear of materials as hardness difference)

  • 김정현
    • 한국산업융합학회 논문집
    • /
    • 제7권4호
    • /
    • pp.369-376
    • /
    • 2004
  • It is shown that the rate of wear can be related to on 'index of wear intensity'. Since both upper and lower specimens have used the same hardness values, equivalent hardness of 'index of wear intensity' used the mean hardness value of specimens. This index is derived from the external variables of load, sliding speed and the hardness of the sliding pairs. The wear behavior as the hardness of the sliding elements on the dry wear has been investigated using a disc on disc configuration. The materials of the specimens are used as ten kinds along their hardness. Using experimental data, we figured the relationship between wea rate and index of wear intensity. The result had been derived a newly wear equation in disc on disc wear system.

  • PDF

판스프링을 사용한 건식마모실험에서 재료경도에 따른 마모거동 (Wear Behavior as Hardness Difference of Material in the Dry Sliding Wear Tests of Using Leaf-Spring)

  • 김정현
    • 한국공작기계학회논문집
    • /
    • 제17권3호
    • /
    • pp.27-33
    • /
    • 2008
  • It is shown that the rate of wear can be related to 'index of wear intensity' using a leaf-spring in the disc on disk on wear tests. Since both upper and lower specimens have used the same hardness values, equivalent hardness of 'the index of wear intensity' used the mean hardness value of specimens. This index is derived from the external variables of load, sliding speed and the hardness of the sliding pairs. The wear behavior as the hardness of the sliding elements on the dry wear has been investigated using a disc on disc configuration. The materials of the specimens are used as ten kinds along their hardness. Using experimental data, we figured the relationship between wear rate and index of wear intensity. A newly wear equation had been derived the result using a leaf-spring in disc on disc wear system.

Unbalanced magnetron sputtering과 Segment target을 활용한 CrZr-Si-N 박막의 미세구조와 마모특성 (Microstructure and tribological properties of CrZr-Si-N films synthesized by unbalanced magnetron sputtering with Cr-Zr-Si segment target)

  • 김동준;라정현;김성민;이상율;이상용
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
    • /
    • pp.113-114
    • /
    • 2012
  • 본 연구는 segment target을 사용하여 unbalanced magnetron sputtering을 활용하여 고 CrZr-Si-N 박막을 합성하고 박막의 미세구조 및 마모 특성을 연구하는데 그 목적이 있다. 박막의 Si 함량을 조절하기 위하여 각 segment target은 Cr,Zr을 일정vol% 유지하며 Si vol%만 변화하여 설계하였다. Si 함량별로 제작된 마모실험 시편의 미세구조는 XRD, FE-SEM, AFM, TEM을 통하여 분석하였으며, ball on disk type의 마모 시험기를 통해 그 마모 특성을 분석하였으며,

  • PDF

이종입자 강화 SiC/Al7075 금속복합재료의 압축특성 및 마모특성 연구 (Mechanical Properties and Wear Performance of the Al7075 Composites Reinforced with Bimodal Sized SiC Particles)

  • 이동현;조승찬;김양도;이상관;이상복;조일국
    • Composites Research
    • /
    • 제30권5호
    • /
    • pp.310-315
    • /
    • 2017
  • 본 연구에서는 액상가압공정을 통해 고체적율의 SiC 입자가 균일 분산된 알루미늄 금속복합재료를 제조하고, 미세조직, 기계적 특성 및 내마모 특성에 대해 분석하였다. 입자크기가 다른 이종 SiC 입자가 약 60 vol.% 이상의 체적율로 균일하게 분산된 SiC/Al7075 복합재료는 단일 SiC 입자로 강화된 복합재료에 비해 체적율이 약 12% 이상 높았으며 압축강도가 200 MPa 이상 증가하였다. 내마모시험 결과 이종 SiC 입자 금속복합재료의 경우 마모너비와 깊이가 각각 $285.1{\mu}m$, $0.45{\mu}m$이며, 마찰계수는 0.16으로 내마모 특성이 가장 우수하였다.

다층 다이아몬드상 카본 필름의 윤활 및 마모 거동 (Tribological behavior of multi-layered diamond-like carbon films)

  • 김명근;이광렬;은광용
    • 한국진공학회지
    • /
    • 제7권1호
    • /
    • pp.59-65
    • /
    • 1998
  • 13.56MHz를 사용하는 r.f.PACVD(Plasma assisted chemical vapor deposition)방법 으로 다층 다이아몬드상 카본(DLC)필름을 Si wafer기판 위에 합성하였다. 다층 DLC필름은 2.5$\mu$m두께의 순수한 DLC필름과 0.2$\mu$m두께의 Si이 함유된 Si-DLC필름으로 구성되었으 며, ball on disk type의 tribometer를 이용하여 대기 중에서 다층 DLC필름의 마모거동을 고 찰하였다. 표면층으로 합성된 Si-DLC필름내의 Si함량이 증가함에 따라 다층 DLC필름과 AISI52100 steel ball 사이에 0.1 이하의 낮은 마찰계수를 유지하는 기간이 증가하였다. 44,000cycle과 158,400cycle의 마모실험 후 측정된 다층 DLC필름의 마모율은 각각 $2.5\times10^{-8}\sim1.8\times10^{-7}\textrm{mm}^3$/rev.과 $7.1\times10^{-9}\sim1.8\times10^{-8}\textrm{mm}^3$/rev.로 나타났다. 158,400cycle의 마모실험 후 측정된 마모율은 내마모 특성이 우수한 DLC필름보다도 2배 정도 우수한 것으로 나타났 다. 마모시험에 의해 형성된 debris의 조성을 분석한 결과, 이런 낮은 마찰계수와 우수한 내 마모 특성은 steel ball의 wear 표면을 덮고 있는 Si oxide debris층의 형성에 따른 결과로 판단되었다. 또한, 이러한 steel ball의 wear scar표면에 형성된 debris층을 제거하여도, 새로 운 Si oxide debris층이 wear scar표면에 다시 생성되어 낮은 마찰계수를 유지하고 있었다.

  • PDF

니켈기 경질 용사코팅의 경도 및 마모율에 미치는 공정조건의 영향 (Effect of Process Parameters on the Hardness and Wear Rate of Thermal Sprayed Ni-based Coatings)

  • 김균택;김재동;김영식
    • 동력기계공학회지
    • /
    • 제15권1호
    • /
    • pp.51-56
    • /
    • 2011
  • The various process parameters of thermal spray process affects on quality of Ni-based coatings. Thus, there is need to analyze the effect of process parameters on quality of Ni-based coatings. In this paper, the effects of process parameters on hardness and wear rate of Ni-based coatings were investigated using 4 design of experiments. First, the Ni-based coatings were fabricated according to $L_9(3^4)$ orthogonal array. The hardness tests and the wear tests were performed on the Ni-based coatings. The analysis of variance for the hardness and wear rate were carried out. As a results, the acetylene gas flow and the powder feed rate were identified as main factors effected on the hardness and the oxygen gas flow and the acetylene gas flow were identified as main factors effected on the wear rate. The full factorial experiments design with different levels was applied for investigation of effect of these main factors.

유동층 연소로에서 국내탄 회재의 마모 특성 (Attrition Characteristics of Korean Antracite Ash in Fluidized Bed Combustors)

  • 이시훈;김상돈;김재성;이종민
    • 공업화학
    • /
    • 제17권5호
    • /
    • pp.547-551
    • /
    • 2006
  • ASTM D5757-95에 따른 입자 마모 측정기와 lab-scale 유동층 연소로에서 국내 무연탄 회재와 모래의 입자 마모 특성을 실험하였다. 기체유속에 따른 마모 특성으로 비산 회재의 입도 분포, 마모 속도, 마모율 등을 측정하였다. 일반적으로 유동층 층물질로 사용되는 모래보다 회재가 마모에 취약해 비산 회재의 발생이 높았으며 마모지수의 경우 5배 정도 높게 나타났다. 기체 유속 변화에 따라 입자의 마모에 의해 미세 입자의 생성이 지속적으로 발생하였으며 다음과 같은 식을 따른다. $$\frac{dW}{dt}=-3.18{\times}10^{-7}(U-U_{mf})W$$.

졸-겔법에 의한 강유전성 PMN 분말 및 박막의 제조와 특성 (The Processing and Characterization of Sol-Gel Derived Ferroelectric PMN Powders and Thin Films)

  • 황진명;장준영;은희태
    • 한국재료학회지
    • /
    • 제8권12호
    • /
    • pp.1138-1145
    • /
    • 1998
  • Ni계 경면합금인 Deloro 50의 마모거동을 15ksi와 30ksi 접촉응력하의 여러 마모조건에서 조사하였다. 상온대기중에서 Deloro 50는 15ksi 응력에서도 극심한 응착마모가 발생하는 매우 낮은 마모저항성을 보였는데 이는 fcc 결정구조를 갖는 Deloro 50 기지상의 경도와 가공경화율이 strain-induced 상변태를 이웅한 hcp 결정구조의 Stellite 6보다 낮기 때문으로 생각된다. 상온 수중에서 Deloro 50는 15ksi 응력에서 Stellite 6와 비슷한 마모저항성을 보였는데 이는 물이 미세요철간의 금속간 접촉을 억제하였기 때문으로 생각된다. 그러나, 30ksi의 높은 접촉응력에서는 상온 대기중길 같은 응착마모가 발생하는 것으로 보아, 30ksi의 높은 응력에서는 물의 응착마모 억제 효과가 없었기 때문으로 생각된다. $300^{\circ}C$ 대기중에서 Deloro 50는 30ksi의 높은 접촉응력에서도 Stellite 6보다 우수한 마모저항성을 보였는데 이는 고온에서 마모시 생성되는 복합산화물층이 효과적으로 금속간 접촉을 방해하여 응착마모를 억제하였기 때문으로 생각된다.

  • PDF