• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.182-187
• /
• 1996

원자로 압력용기강의 품질 열처리인 ？칭과 템퍼링 중간에 페라이트와 오스테나이트가 공존하는 2상영역에서 열처리를 행함으로써 인성을 향상시키는 제조공정을 개발하였다. 710~74$0^{\circ}C$에서 4~8시간 동안 2상영역 열처리를 추가하면 기존 열처리 과정에 비하여 상온 충격인성이 크게 증가하였다. 상온 충격인성과 두께를 고려하여 결정한 최적 조건안 7$25^{\circ}C$에서 6시간 동안 2상영역 열처리를 하면 최대 흡수 에너지가 30~50% 증가하고, 천이 온도가 약 l$0^{\circ}C$ 감소하였다. 2상영역에서 형성된 침상 오스테나이트는 냉각 중에 하부 베이나이트 또는 마르텐사이트로 변태하여 템퍼드 베이나이트와 복합조직을 이루므로 균열진전을 억제하여 충격인성이 향상되었다. 2상영역 열처리 온도가 높거나 시간이 길면 오스테나이트의 체적 분율이 증가하거나 조대화가 일어나 균열진전억제 효과는 저하되었다.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.435-445
• /
• 1997

In order to study the manufacturing possibility of connecting rod by direct quenching method, the difference between connecting rod by direct quenching and that by general heat treatment were investigated by observing microstructure, by measuring mechanical properties, by conducting fatigue testing, and by measuring the amount of tool wear in actual cutting. Connecting rod manufactured by direct quenching had better fatigue life than that by general heat treatment, which was due to homogeneous microstructure, and higher strength. The amount of cutting tool wear of connecting rod by direct quenching was higher than that by general heat treatment, which was due to low machinability and high toughness of tempered martensite microstructure. Therefore it will be added the study of heat treatment and cutting condition for manufacturing by direct quenching.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.469-475
• /
• 1984

In dual phase steel composed of martensite and ferrite which are different in deformation behavior, the quantitative estimation of fracture toughness is investigated by the R-curve method and the stretched zone method of JSME Sool. In the homogeneous material J$_{IC}$ value measured by the R-curve method and the stretched zone method are almost equivalent each other, but in the inhomogeneous material J$_{IC}$ value by the stretched zone method is overestimated than that by the R-curve method. Such a overestimation for the J$_{IC}$ is due to the continuous plastic blunting of ferrite after the stretched zone width in martensite reached critical value which overmeasures the critical stretched zone width.width.

• Journal of the KSME
• /
• v.22 no.3
• /
• pp.184-190
• /
• 1982

어쿠우스틱 에밋션(AE)법에 의한 마찰용접강색도의 공정중 해석에 관한 실험적 연구에서의 탐 색적 연구결과는 다음과 같은 예비적 결론으로 나타내진다. 1) 철금속의 만족한 마찰동정을 달성할 때는 두개의 AE 돌출이 나타난다. 그 하나는 A역인 용 접사이클 중에 일어나는 것이며, B역인 또 다른 하나는 용접종료후 2, 3초 지나서 시작되는 냉 각중의 돌출이다. 최초의 돌출은 주로 재료의 소성변형에 기인하며, 두 번 째 AE 방출은 일반 적으로 크기가 더 크며 냉각중의 마르텐사이트 변태의 결과라고 해석된다. 2) AE의 초량과 강의 마찰용접강도 사이에는 일정한 상관관계가 존재한다고 생각된다. 실험적 오차를 더욱 감소시킨다면 정량관계가 수립될 수 있을 것이다. 3) 트랜스듀서와 기타 부품의 적절한 선택에 의해 철금속의 마찰용접품질(강도)을 공정중에 탐 색하기 위한, AE 법에 의한 공정중 용접강도 해석 시스템의 개발 가능성이 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.2
• /
• pp.36-49
• /
• 1983

최근 높은 경제성과 용접성의 우수성에 의한 마찰 용접의 응용에 있어서 내열.내식 재료가 개스터어빈, 기관, 핵 발전기등의 기계 부품 생산 공업에 널리 이용되고 있다. 따라서 이종내열 합금강의 마찰 용접된 부품을 이용함에 있어서 내식.내마모 및 용접성 뿐만 아니라 고온 피로 강도와 크리이프 강도 등의 복합 특성에 관한 연구가 요구되고 있다. 본 연구에서는 마르텐사이트계 실크롬 내열강과 오오스테나이트계 닉켈크롬 스테인레스강의 이종 내식.내열 합금강의 최적 용접조건하에서 마찰 용접된 후의 시효 열처리가 용접재의 700 .deg.C 고온 회전 굽힘 피로강도 특성에 미치는 영향에 관하여 실험과 강도해석에 의해 조사되었고 용접후의 용체화 처리와 시효 열처리법에 의한 내열강 마찰 용접강도 개선법을 개발코저한 것이다.

• Journal of Power System Engineering
• /
• v.14 no.2
• /
• pp.78-83
• /
• 2010

This study was carried out to investigate the effect of microstructure on the damping capacity of 12Cr martensite heat-resisting steels, in case of the specimen with martensite phase contained the volume faction of ferrite phases, under 5%. The damping capacity was decreased with the increase of solution treatment temperature and time. While it was increased with the increase of tempering temperature and time. The damping capacity was higher in case of specimen with martensite single phase structure than the specimen with martensite phase contained of ferrite phases.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.24-29
• /
• 2005

Optimal heat treatment process in martensitic stainless steel such as SUS416 is investigated. The approach is based on the combination of the interpolation and extrapolation method of a standard heat treatment technology with the principle of quenching and tempering temperature difference. The relationship of the macroscopic structure, fracture toughness and ductility as well as the hardness and strength are considered to induce a simple rule to apply with feasibility. Consequently, Optimal heat treatment condition in martensitic stainless steel is proposed and is shown the better quality. It was found that the smaller pain size of microstructure gives the enhanced fracture toughness and ductility.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 1998

13%Cr martensitic stainless steel was microalloyed with 0~1.5%Mo, and the mechanical properties were tested at the various heat treated conditions. Mo addition increased austenitization temperature(Ac1), and had little influence on the hardness and tensile properties at the annealed condition. The higher the austenitizing temperature, the higher the hardness and tensile strength, but Mo addition decreased those properties. The impact energy after austenitization increased with addition of Mo. The decrease of mechanical properties and increase of impact energy of Mo-alloyed steel after austenitization are thought to be caused by formation of ductile ${\delta}$-ferrite phase in the microstructure.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.66-75
• /
• 1993

This paper proposes a monitoring method for nondestructive and in-process measurement of the case depth in LASER surface heat treatment process. The method is essentially an eddy-current method, and measures sensing coil's electrical impedance which varies with the changes of the material microstructure due to hardening. To investigate te validity of the proposed method a series of experiments were performed for various hardning depths. The results show that the relationship between the eddy- current sensor output and the changes in case depth is almost linear. This indicates that the eddy-current measuring method can be used as one of the possible monitoring method for mesauring the hardened depth in LASER heat treatment processes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.564-571
• /
• 1985

The estimation of fracture toughness in inhomogeneous material is still insufficient because it is difficult to get information of fracture initiation at the crack tip. Therefore, martensite-ferrite dual phase steel was prepared for a model material and micro-fracture behavior was investigated in the region of pre-fatigue crack in order to understand the characteristic of fracture resistance in inhomogeneous materials. In the case of severely inhomogeneous state, micro-fracture appearance is not distributed homogenously so that the estimation of fracture toughness is hardly possible. On the other hand when the grain size is refined or the strength of martensite is lowered, micro-fracture appearance is distributed homogenously and fracture toughness remarkably increases.