• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.145-155
• /
• 2007

The objectives of this study aye to develop an on-line departure time-based travel time estimation method and to determine an optimal link length for the estimation. This study developed a link-based rolling horizon logic as the travel time estimation method. In order to determine an optimal link length, the information error of the travel time provision from the user's perspective was defined and employed as a selection criterion. It was found that, when the travel time aggregation size was set as five minutes, a link length of four kilometers gave the most accurate result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.241-246
• /
• 2010

This study is to estimate the link travel time of road networks in urban areas utilizing traffic information which is collected throughout the operation of Bus Information System (BIS). BIS, which applies the hightech information technology to an existing bus system, has been developing and operating in many bodies including the local self-government entities. However, a study to consider the technology trend is relatively rare. Even though some useful traffic informations have been collected throughout the operation of an existing BIS, which set limits to the development of a future service of integrated analysis. Accordingly, in this study, a fundamental research is performed for traffic controls in urban areas and providing a traffic information for driver throughout the estimation of link travel time of road networks. The study is proceeded throughout the data collected from the operation of BIS (Bus Information System). The result showed that the patterns of going through traffic were divided up to 2 in the bus travel time in BIS then estimate two link travel time.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.45-54
• /
• 2013

Korea Expressway Corporation has been utilizing vehicles equipped with dedicated short range communication (DSRC) based on-board equipment (OBE) for collecting path travel times. A path based method (PBM) estimates the path travel time using probe vehicles traveling whole links on the path, so it is not always possible to obtain sufficient samples for calculating path travel time in the DSRC system. Having this problem in utilizing DSRC for travel time information, this study attempted to estimate path travel time with the help of a link based method (LBM) and examined whether the LBM can be used for obtaining reliable path travel times. Some comparisons were made and identified that the MAPE difference between the LBM and the PBM estimates are less than 3%, signaling that LBM can be used as a proxy for PBM in case of sparse sample conditions. Some limitations and a future research agenda have also been proposed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.59-72
• /
• 2017

As the part of study which handles the measure to use the individual vehicle information of taxi GPS data on signal controls in order to overcome the limitation of Loop detector-based collecting methods of real-time signal control system, this paper conducted series of evaluations and improvements on link travel time, queue vehicle time estimates and traffic condition decision algorithm from the research introduced in 2016. considering the control group and the other, the link travel time has enhanced the travel time and the length of queue vehicle has enhanced the estimated model taking account of the traffic situation. It is analyzed that the accuracy of the average link travel time and the length of queue vehicle are respectably both approximately 95 % and 85%. The traffic condition decision algorithm reflected the improved travel speed and vehicle length. Smoothing was performed to determine the trend of the traffic situation and reduce the fluctuation of the data, and the algorithms have refined so as to reflect the pass period on overflow judgment criterion.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.145-154
• /
• 2008

The purpose of this study is to evaluate the quality of on-line departure time-based link travel time estimates. For this, accuracy (i.e. estimation error) and timeliness (i.e. degree of time lag) are proposed as MOE of the quality of on-line link travel time estimates. Then the relationship between quality of link travel time estimates and link length and level of congestion is analyzed. It was found that there is trade-off between the accuracy and timeliness of link travel time estimates. The estimation error was modeled to consist of two components: one is systematic error and the other is mean square error which reflects level of congestion. further, time lag was again segmented into three parts for the analysis purpose. There are minimum one, congestion-related one, and update interval-related one. From the real-world data using AVI system, it was revealed that regardless of the link length and level of congestion, 10 minutes of time lag occurs in general.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.7-18
• /
• 2006

Data for travel information Provision are regularly aggregated to Provide travel time information in a reliable and convenient manner and to manage traffic data and information efficiently. In most of practices in Korea, the GPS based travel time data are mainly aggregated every 5 minutes As a result, some probes can't pass by a link within aggregation interval and thereby create uncompleted link passing data. But these data are mostly generated during the congested times and therefore a method that uses such uncompleted link passing data are required. This study estimated queue dissipation length, green time and cycle that use GPS spot speed and developed a link travel time estimation method using such uncompleted link passing data. It also presents method and the overall process of using such data to estimate link travel time in a more accurate manner. As a result, MAPE 1.98% and MAE 4.75 sec of link travel time accuracy improvement has been reported, which is not much different from the real link travel time. The method Proposed here would be an alternative to increase the amount of GPS probe data, especially in congested urban arterial case.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.157-168
• /
• 2006

Spatial detection system such as AVI, GPS, and Beacon etc. can provide spatial travel time only after a vehicle Passes through a road section. In this context, majority of the existing studies on the link travel time estimation area has focused on the arrival time-based link travel time estimation. rather than departure time-based link travel time estimation. Even if some of the researches on this area have developed departure time-based link travel time estimation algorithms, they are limited in that they are not applicable in a real-time mode. The objective of this study is to develop an departure time-based link travel time estimation algorithm which is applicable in a real-tine mode. Firstly, this study discussed the tradeoff between accuracy and timeliness of the departure time-based on-line link travel time estimates. Secondly, this study developed an departure time-based on-line link travel time estimation algorithm which utilizes the Baysian inference logic. It was found that the proposed approach could estimate departure time-based link travel times in a real-time context with an acceptable accuracy and timeliness.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.71-79
• /
• 2005

Existing arterial link travel time estimation methods relying on either aggregate point-based or individual section-based traffic data have their inherent limitations. This paper demonstrates the utility of data fusion for improving arterial link travel time estimation. If the data describe traffic conditions, an operator wants to know whether the situations are going better or worse. In addition, some traffic information providing strategies require predictions of what would be the values of traffic variables during the next time period. In such situations, it is necessary to use a prediction algorithm in order to extract the average trends in traffic data or make short-term predictions of the control variables. In this research. a multi-step ahead prediction algorithm using Data fusion was developed to predict a link travel time. The algorithm performance were tested in terms of performance measures such as MAE (Mean Absolute Error), MARE(mean absolute relative error), RMSE (Root Mean Square Error), EC(equality coefficient). The performance of the proposed algorithm was superior to the current one-step ahead prediction algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.559-564
• /
• 2006

The purpose of this study is to minimize negative effect of VMS travel time information service by sensitivity analysis, which forecasts the change in link traffic volume. As a result, strategies for providing travel information that can change driving patterns for minimizing travel time were found. The framework for analysis is recently expanded with the application of game theory. According to the experiment, the algorithm generated for travel time information service reduces total travel time and yields travel patterns that is very close to the system optimization. Also, this study found that the route the travel time service information is provided about could play the important role.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.23-35
• /
• 2009

This study proposes a methodology for estimating representative section travel times using individual vehicle travel information under the ubiquitous transportation environment (UTE). A novel approach is to substantialize a concept of dynamic node-links in processing trajectory data. Also, grouping vehicles was conducted to obtain more reliable travel times representing characteristics of individual vehicle travels. Since the UTE allows us to obtain higher accuracy of vehicle positions, travel times for each lane can be estimated based on the proposed methodology. Evaluation results show that less than 10% of mean absolute percentage error was achievable with 20% of probe vehicle rate. It is expected that outcome of this study is useful for providing more accurate and reliable traffic information services.