• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.3
• /
• pp.206-215
• /
• 2013

A linear engine has advantages in terms of volume and weight, because there are no rotating parts. Thus, it is considered that linear engines might be suitable in hybrid vehicles. However, the linear engine has challenges in terms of the engine ignition timing and efficiency, so the engine has not been commercialized yet. In this study, the dynamic and combustion characteristics of the linear engine might be specified by various loads which are changed by conductance. The engine used in this experiment consists of two combustion chambers, four compressors, two linear alternators and a mover with a piston head and magnets. The way fuel is supplied in the experiment is by propane fuel being mixed with air in the carburetor, then being delivered into combustion cylinders via compressors. In the experiment, conductance is altered from 0.04 to 0.16mho, and the ignition timing is ahead by just 5.0mm from the maximum stroke. As a result of the experiment, frequency, stroke, input calories and maximum pressure are decreased when the conductance is increased. Meanwhile, IMEP, generation efficiency and electric power are increased when the conductance is increased. Therefore, it might confirm that high conductance generates more efficient electric power, but that thermal efficiency is the highest in the state of 0.08mho.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.1
• /
• pp.66-73
• /
• 2005

Hydrogen linear power system is estimated as the next generation power system which can obtain a performance as same as fuel cell. In order to develop Hydrogen combustion power system with high thermal efficiency, it is very important to understand the basic characteristics of hydrogen combustion and establish combustion stabilization technique of its system. In this study, RICEM(Rapid Intake Compression Expansion Machine) for researching of hydrogen combustion linear power system was manufactured and evaluated, and the basic characteristics of linear RICEM were analyzed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.4
• /
• pp.321-327
• /
• 2010

Current rechargeable battery cannot provide high energy density and the operational durations required. But linear engine/generators provide high energy density for portable power applications because fuel is more high density. In this paper, we suggest that basic design of powerpack using linear engine for assisting power output. Efficiency is relatively high because linear engine don't have crank mechanism compared with rotary engine. We made prototype engine and had experiments to know moving characteristic about the Linear Engine. It was possible to operate velocity at 50 Hz at the firing and pressure in cylinder was 16bar.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.4
• /
• pp.283-290
• /
• 2003

To clarify the cause of backfire occurrence and realize a hydrogen fueled engine linear alternator system, dynamic characteristics of a free-piston hydrogen engine were analyzed and compared with those of conventional reciprocating engines. It was found that the mean velocity and acceleration of a free-piston engine were higher than those of reciprocating engines. Piston displacement and compression ratio were varied with the change of the fuel mass flow rate. Therefore, the operational stability and controllability were the most important thinks of the development of a free-piston hydrogen engine.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.2
• /
• pp.183-190
• /
• 2012

The research shows the experiment results according to the combustion characteristics and configuration of the linear generator of powerpack for the generating power applying the 2-stroke compact linear engine. The powerpack used in this paper consists of 2-stroke linear engine, linear generator and air compressor parts. For identifying the combustion characteristics and generating power of linear engine, some parameters were varied sucha as electric load, fuel input calorie, spark timing delay and equivalence ratio. Also generating power was confirmed at each operation conditions, when the air gap length of linear generator part was changed as each 1.0 mm and 2.0 mm. During the all operations, intake air was inputted under the wide open throttle. Mass flow rate of air and fuel was changed using mass flow controller, after these were premixed by premixture device, and then premixed gas was supplied directly into each cylinder. As a result, piston frequency and combustion characteristics were different at each conditions according to parameters affecting the combustion such as fuel input calorie, resistive load, spark timing delay and equivalence ratio. Consequently, these had an effect on generating power.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.124-131
• /
• 2019

A design study of gas turbine engine simulation duct was conducted to investigate the operating characteristics and control gain tunning of the Altitude Engine Test Facility(AETF). The simulation duct design involved testing variable spike nozzle and ISO standard choking nozzle to verify the measurements such as mass flow rate and thrust. The simulation duct air flow area was designed to satisfy Ma 0.4 at the aerodynamic interface plane(AIP) at engine design condition. The test conditions for verifying the AETF controls and measurement devices were deduced from 1D analysis and CFD calculation results. The spike-cone driving part was designed to withstand the applied aero-load, and satisfy the axial traversing speed of 10 mm/s at whole operation envelops.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.160-166
• /
• 2002

In this paper, data acquisition and analysis of a measuring machine for marine engine's cams is discussed. A rotary encoder and linear scale of the machine to measure angular and linear displacement respectively are interfaced to the PC via encoder board with 2 channels. The design and measuring data are interpolated by cubic spline curves to compute the precision error which is defined by the maximum and minimum distances between two curves. The minimum zone fit of ISO is employed to evaluate the geometric deviation. The developed system takes only 5 minutes to measure and analyze while the CMM takes over 1 hours even with a skilled operator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.101-102
• /
• 2013

CAN통신은 자동차 내부 전자제어장치 간의 통신을 위하여 개발되었으며, CAN통신은 UART 방식과는 달리 전송속도와 안정성 측면에서도 뛰어나고 배선 결선에서도 간편한 버스타입으로 구성할 수 있어서 배선량을 줄일 수 있어 생산시간의 단축과 신뢰성을 높일 수 있다. 최근에는 자동제동장치, 선박의 엔진제어 등 다양한 분야에서 사용되고 있다. 본 논문에서는 CAN통신을 기반으로 하여 3개의 리니어 액추에이터(Linear Actuator)를 통하여 수평 플랜트에 대한 수평제어를 구현하였다. 또한 본 논문의 수평제어시스템은 수평조절을 하는 액추에이터와 CAN통신을 내장한 AT90CAN128로 구성되어 있다. CAN통신을 기반의 수평제어를 통해 선박이나 자동차의 액추에이터를 조절하여 수평을 제어하고자 한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.59-63
• /
• 2005

가. 자율주행 트랙터가 작업하는 동안 작동상태를 효과적으로 모니터링하고 제어할 수 있도록 하기 위해 인터넷을 통한 자율주행 트랙터의 모니터링과 원격제어 기술에 대하여 시험 하였다. 나. 트랙터를 모니터링하고 제어하는 곳과 경작지가 있는 곳을 인터넷으로 연결하고, 운전자가 탑승하지 않은 트랙터는 인터넷을 통해 전달받은 명령을 수행하도록 액튜에이터를 제어하고 제어되는 상황을 경작지에 위치한 카메라가 촬영하여 인터넷을 통하여 원격지의 운전자 쪽으로 전송하도록 시스템을 구성했다. 다. HST 트랙터 조종장치로서 서보제어가 가능한 액튜에이터를 개발 장착하고 제어성능을 시험하였다. 전자유압제어(EHPS)식 조향액튜에이터는 , 조향가능각 100도의 전범위에 조향 제어가 가능했으며 전조향에 필요한 시간은 약 1.6초 정도 였다. 피스톤 펌프의 사판각을 제어하는 전후진 제어기는 리니어 모터 구동식으로 총 제어 변위 50mm를 이동하는데 제어시간이 약 1.2초 소요되었다. 엔진 회전수를 제어하기위한 스로틀 액튜에이터는 리니어 모터 구동식으로 제어변위 30mm에 대해 제어시간이 0.8초 소요되었다. 3점 링크에 부착된 작업기의 위치를 제어하는 리프트 제어기도 리니어모터로 구동하였으며 제어거리 40mm에 대해 제어시간 0.9초정도가 소요되었다 라. 제작된 HST 무인 트랙터를 인터넷과 무선통신 시스템을 이용하여 원격 모니터링과제어 가능성에 대해 시험 했다. 인터넷을 통한 장거리 원격제어 및 모니터링 시험에서 제어신호의 전달지연은 0.3 ${\sim}$ 0.5초정도로 제어신호의 피이드 백을 확인할 때까지는 약1초정도의 대기 시간이 필요한 것으로 나타나 모니터링 및 제어 시스템의 개발 시 이를 고려할 설계가 필요한 것으로 나타났다.된 표층수온 분포값보다 2005년 2월에 관측된 표층수온 분포값이 상대적으로 낮은 분포 특성을 나타내고 있었다. 따라서 인공위성자료를 이용한 황해의 2004년 해황 분석 결과는 이상수온 상승의 원인이 쿠로시오 해류의 변동과 관련성이 높다고 판단되며 이에 대한 지속적인 연구가 현재 진행중에 있다.에 인산염 처리, 여기에 초음파 처리, 마지막 단계로 3분 끓이면 억제율이 68%까지 억제되었다. 이는 단일처리시 전혀 억제를 못하는 처리를 단계별로 한 단계씩 더해가면 allergy 억제효과가 나타난다고 할 수 있겠다. 초음파 처리도 역시 저 allergy 처리 공정에 이용될 수 있는데 이것은 그 처리로 인해 새로운 알러젠이 생성될 수도 있다. 또한 복합처리로 allergy를 감소시키면 연속적이고 동시적으로 하기 때문에 원가를 절감할 수 있다.환경현안에 대한 정치경제적 접근을 외면하지 말고 교과서 저작의 소재로 삼을 수 있어야 하며, 이는 '환경관리주의'와 '녹색소비'에 머물러 있는 '환경 지식교육'과 실천을 한단계 진전시키는 작업으로 이어질 것이다. 이후 10년의 환경교육은 바로 '생태적 합리성'과 '환경정의'라는 두 '화두'에 터하여 세워져야 한다.배액에서 약해를 보였으나, 25% 야자지방산의 경우 50 ${\sim}$ 100배액 어디에서도 액해를 보이지 않았다. 별도로 적용한 시험에서, 토마토의 경우에도 25% 야자지방산 비누 50 ${\sim}$ 100배액 모두 약해를 발생하지 않았으나, 오이에서는 25% 야자지방산 비누 100배액에도 약해를 나타내었다. 12. 이상의 결과, 천연지방산을 이용하여 유기농업에 허용되는 각종의 살충비누를 제조할 수 있었으며, 방제가 조사결과 진딧물, 응애 등 껍질이 연약한

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.104-111
• /
• 2009

A ship engine operator should compensate the crankshaft assembly of ship engine after inspecting crankshaft deflection error in the crank throw regularly to avoid engine vibration and abrasions. In the previous method, the operator enters the bed plate and measures crankshaft deflection using dial gauge on rotating crankshaft manually. However, this method can cause dangerous situation to the operator as well as uncomfortable in an inferior environment. In order to solve the problems, this paper studies the method which makes the operator measure the error outside of the bed plate. In this paper, it is suggested that BlueTooth wireless communication transfers the error data to the outer standing operator with digitalized crankshaft deflection inspection device developed in this paper. So, the wireless measurement system is developed and applied to a medium-speed marine engine through size-miniaturization. After applying test, the developed inspection device showed that it provides much safe and ease inspection method. Furthermore, in the result, the measuring accuracy is more improved.