• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.88-94
• /
• 2008

The aim of the study was to assess the cosmeceutical activity of Pinus rigida Mill. and it is possible that can be used as a cosmetic ingredient for application of cosmetic industries. The concentration of total phenolic compound of P. rigida water soluble fraction and P. rigida ethyl acetate soluble fraction showed 47 mg/L and 601 mg/L respectively. In the result of DPPH scavenging radical activity, P. rigida ethyl acetate soluble fraction showed 86% and it was similar to BHA effect at 10 ppm concentration. Xanthine oxidase inhibition of P. rigida water soluble fraction and P. rigida ethyl acetate soluble fraction were 76.3% and 80.5% at 500 ppm, respectively. In the result of tyrosinase inhibition effect related to skin-whitening, P. rigida water and ethyl acetate soluble fraction showed 42%, 10.9% at a 1,000 ppm. In these results, P. rigida has a great potential as a cosmeceutical ingredient with a natural anti-oxidant source.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.382-388
• /
• 1988

Improvement of productivity by forest tree breeding work in Korea was estimated for a few important tree species. Progenies of 17 plus trees of red pine (Pines densiflora) outgrew by 57 percentage compared with progenies of unselected trees at age 15. If best three families are selected among the 17, more than double in volume grow-th is expected. The hybrid Pinus rigida ${\times}$ P. taeda showed more than double volume growth compare to P. rigida at a southern plantation at age 15. However, the superiority of the hybrid decreased at northern plantations, mainly because of low coldhardiness of the hybrid. At a northern plantation, the hybrid grew less than the P. rigida on upper hill, while the hybrid grew much better than the P. rigida on flat area. Another hybrid Populus alba ${\times}$ P. glandulosa grew faster than both parents by two to two and half times according to planting sites at age 10. Introduction of Pinus rigida also showed increased volume growth. Volume increase by selection of best five provenances among 45 at age 12 was estimated as 53 percent compare to progenies of plus trees in Korea, Additional 19 percent of volume increase was expected by selection of the best families within the best provenances. Annual production of chestnuts reached about 70,000 M/T by planting resistant clones to chestnut gall wasp (Dryocosmus kuriphilus), which killed almost all susceptible trees. Although polyploid trees and mutants have been produced by colchicine treatments in over 10 tree species, none of them is economically important Remarkable improvement of productivity is expected by biotechnology in future through selection, hybridization, introduction of foreign genes at cell, cell organelle and gene level, and gene transformation. At present, mass propagation of superior planting materials by tissue culture will increase the productivity.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.165-169
• /
• 2010

Fusarium circinatum is the causal agent of the pine disease commonly referred to as pitch canker. In this study, F. circinatum was isolated from the diseased Pinus rigida in the golf courses, Korea. The morphological characteristics and the molecular features of the isolates were investigated to identify the pathogen. Histone H3 gene and IGS rDNA region was analyzed and consequently the isolates identified as F. circinatum. All of them have the same sequences and the mating type was determined as MAT1-1. The inhibitory effect of the methanol extracts from the disease resistant pine species, Pinus koraiensis and Pinus densiflora and a susceptible species, P. rigida were evaluated against the isolate, F. circinatum. As a result, the extracts of P. koraiensis and P. densiflora showed higher antifungal activity than that of the susceptible, P. rigida.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.271-278
• /
• 1998

Heavy metal concentrations in rocks and soils from serpentinite(SP) and in plants (Pinus densiflora: PD and Pinus rigida: PR) were examined at Baekdong mine in Hongsung, Chungnam. Parent rocks were compared with amphibole schist(AS) and gneiss(GN) and plants divided the above grounds and roots were examined, respectively. In rocks, Ni, Cr, Co, Fe concentrations in SP were higher than those in AS and GN. The concentrations of top soils had the similar differences to their rocks; especially Ni, Cr, Co, Fe concentrations were the highest in SP, Zn and Sc concentrations, however, were the highest in AS. Average Ni, Cr, Co, Au, As, Sb, W concentrations of PD were the highest in SP and especially Ni, Cr, Co concentrations were accorded with changes of rocks and top soils. Zn and Sc concentrations in AS were higher and Fe and Mo concentrations in GN were higher than those in SP. Compared with two plants in the same serpentinite sites, most elements of PR were higher than those of PD. Therefore, these suggested PR absorbed much heavy metal than PD. Most element concentrations of roots in two plants and three rocks were higher than those of the above ground. Relative ratios (average plant concentration/soil concentration) of Ni, Cr, Co, Zn, Sc, Fe in AS and GN were higher than those of SP. Especially, relative ratios of most elements except Zn in GN were the highest.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.30-39
• /
• 1992

Artificial acid rain(pH2.0, 3.0, 4.0 and 5.0) was treated on the seeded pots of 4 species to examine its effects on germination, leaf injury and seedling growth. Aluminum ammonium sulfate solution (0.5, 1.0 and 2.5mM) and artificial acid rain (pH3.0, 4.0 and 5.0) were treated on the seeded germinators of 3 species to examine its effects on germination and radicle growth. Artificial acid rain was prepared by diluting sulfuric acid with ground water and ground water(pH6.5) was used as control. Artificial acid rain was sprayed to seeded pots three times per week. About 5mm of artificial acid rain was treated each time from early April to early October, 1991. Germination, seedling establishment, radicle growth, leaf injury and seedling growth were measured and compared among the treatments. The results were summarized as follows 1. Germination, seedling establishment rate of Pinus densiflora were highest on the pH5.0 pot whereas those of Ailanthus altissima was highest on the control pot, and those of Magnolia sieboldii showed the highest value on the pH3.0 pot. 2. The differences in seedling height of Pinus densiflora and Pinus rigida were significant among the treatment levels of acid rain, whereas those of Magnolia sieboldii and Ailanthus altissima were not significant. Seedling heights of Pinus densiflora and Pinus rigida were highest on the pH3.0 pot, and that of Magnolia sieboldii was highest on the pH4.0 pot, and that of Ailanthus altissima was highest on the control pot. 3. Seedling dry weights of Pinus densiflora. Pinus rigida, and Ailanthus altissima differed significantly among the treatments, but that of Magnolia sieboldii did not differ. Highest seedling dry weights of Magnolia sieboldii and Ailanthus altissima were observed on the pH4.0 pot, and that of Pinus densiflora was observed on the pH3.0 pot, and that of Pinus rigida was observed on the pH5.0 pot. 4. With decrease of pH value of artificial acid rain, the number of injured needle and injured individual tended to be increased. 5. The differences in effects of soil acidity were highly significant among the treatments for all species. 6. Radicle growth of Pinus densiflora differed significantly among pH levels and aluminum concentrations.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.573-588
• /
• 2020

The study investigated the forest vegetation structure of Kongju National University Forests in the vicinity of Seokjangri-dong to provide the information needed for efficient use and management. It conducted a Z-M phytosociological vegetation survey in 60 quadrate plots in August 2019 and generated the actual vegetation map by analyzing the physiognomic community classification and mean importance value. The physiognomic community classification showed five vegetation community types: Quercus acutissima community, Pinus densiflora community, Quercus variabilis community, Pinus rigida community, and Quercus serrata community. The relative importance value in the Q. acutissima community was 31.4% for Q. acutissima, 9.6% for Prunus spp., and 9.0% for Q. variabilis. In the P. densiflora community, it was 24.9% for P. densiflora, 12.4% for Q. acutissima, and 11.5% for Q. serrata. In the Q. variabilis community, it was 25.3% for Q. variabilis, 9.8% for Prunus spp., and 8.5% for Q. acutissima. In the P. rigida community, it was 28.4% for P. rigida 28.4%, 10.0% for Q. acutissima, and 9.3% for P. densiflora. In the Q. serrata community, it was 27.0% for Q. serrata, 11.3% for Q. aliena, and 11.5% for Styrax japonica. The actual vegetation map based on the uppermost dominant species to identify the forest vegetation's spatial distribution characteristics indicated that the natural vegetation covered the most with 87.5%, the number of vegetation patches was 87, and the average area per patch was 1.46ha.

• Proceedings of the Korea Forestry Energy Research Society Conference
• /
• 2011.02a
• /
• pp.92-95
• /
• 2011

• Journal of Korean Society of Forest Science
• /
• v.62 no.1
• /
• pp.82-86
• /
• 1983

Cone and seed development after self-pollination in 14-year-old Pinus rigida Mill. was investigated in an $F_1$-hybrid seed orchard that consists of Pinus rigida Mill. and Pinus taeda L. in alternative rows. On an average, 83.8% of the self-pollinated receptive female strobili developed into cones. This value appears to be normal compared to cone development after open-pollination in other pine species such as in Pinus sylvestris L. However, there was a great variation in filled seed development after self-pollination among the investigated individual trees (Table 1-1). The 34.5%, a ratio of filled seeds after self-pollination was significantly lower than 91.7%, that by the open-pollination. Some of the investigated trees developed 70.0%-83.5% of filled seeds after self-pollination. Thus, those are not desirable as trees for seed parent in establishing $F_1$-hybrid seed orchards in future. A further study on the rate of filled seed development by various pollination systems consisting of self-pollination, self-and cross-pollination with intraspecific, mixed (tree's own and foreign pollens) pollens and cross-pollination with interspecific, mixed pollens of the two parental tree species is necessary to determine the quality of seed parent trees in establishing $F_1$-hybrid seed orchards.

• Proceedings of the Zoological Society Korea Conference
• /
• 1994.10a
• /
• pp.126.2-126
• /
• 1994

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.258-267
• /
• 2017

In this study, pitch pine (Pinus rigida, PIR) and Mongolian oak (Quercus mongolica, QUM) pellets were fabricated with bark or/and drying waste liquor (DWL) of larch (Larix kaempferi, LAK) as an additive. Based on the results of fuel characteristics of the pellets, optimal conditions for producing the high-quality pellets were provided. In the analysis of chemical composition, bark contained holocelluose and lignin of 90% and over. DWL had 0.1% solid assumed to sugars which are generated from the oven-drying of LAK logs. QUM showed high ash content (2.2%) by containing of bark in the sawdust. Bark and DWL of LAK had high ash content of 4% and over. Calorific values of all specimens and additives were higher than that of the $1^{st}$-grade standard of wood pellets designated by NIFOS (18.0 MJ/kg). PIR and QUM pellets were fabricated with additive of 2 wt% based on the solid weight of oven-dried sawdust using a piston-type flat-die pelletizer, and thus ash content and calorific value of the pellets did not affect by the use of additive. Durability of the pellets increased with the use of additive. Durabilties of pellets, which were fabricated with bark as an additive and DWL as a controller of moisture content for sawdust, did not differ from those of pellets without additives and were lower than those of pellets either with bark or DWL. However, use of both bark and DWL for the production of wood pellets might be favorable because it can make a profit from the collection process of DWL. Based on the results of fuel characteristics of the pellets, QUM and PIR pellets were produced by a flat-die pelletizer. Moisture content (MC), bulk density and durability of the pellets improved with the use of additive. Particularly, sawdust MC of 10% and the addition of bark or DWL for PIR as well as sawdust MC of 12% and the addition of bark for QUM might be optimal conditions for the production of high-quality pellets. Except for the ash content of QUM pellets, other properties of PIR and QUM pellets exceeded the $1^{st}$-grade wood pellets standards of NIFOS.