• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.396-405
• /
• 2009

열차제어 지상신호시스템에서 핵심적인 철도보안기능을 수행하는 연동장치는 철도산업의 안전성 확보 지침에 따라 높은 안전성과 신뢰성을 갖추어야만 한다. 따라서 연동장치는 높은 안전성과 신뢰성을 달성할 수 있도록 실시간 운영체제 및 그 구성 하드웨어의 랜덤 고장에 대처하기 위한 Fail-Safe형 다중 제어시스템으로 구성된다. 이러한 구성에서는 운영자 인터페이스를 포함한 다양한 장치와의 메시지 교환을 위한 인터페이스 가능을 구현하기 어려운 특성이 존재한다. 본 논문에서는 연동장치와 상위 인터페이스 설비간의 통신기능을 구현하기 위한 Dual Ethernet 네트워크 구성 및 DPST (Dual Packet Seamless Transfer) 통신 프로토콜을 제안한다. 제안된 시스템의 구성에서는 특정 네트워크 장비의 랜덤 고장이나 통신오류에 강인한 특성을 보이며 통신채널의 장애를 검출할 수 있는 기능이 추가되어 설비의 유지보수에 효과적인 정보로 활용될 수 있음을 실험적으로 검증한다. 제안된 네트워크 구성 및 운영 프로토콜을 현대제철 전용철도용 전자연동장치에 구현하고 그 성능과 특성을 유럽표준규격 EN50159의 지침을 토대로 타당성을 분석한다.

• 한국지반환경공학회 논문집
• /
• 제11권8호
• /
• pp.15-23
• /
• 2010

토석류는 사면 붕괴, 산사태, 홍수 등과 같은 인명 및 재산피해를 수반하는 자연재해의 일종이다. 2006년 7월 집중호우로 인하여 대규모 토석류가 발생하였으며, 이에 따라 고속국도, 일반국도, 철도 등의 국가 기간망이 통제되어 언론에 보도되는 사태가 발생하곤 하였다. 토석류에 대한 연구는 지금까지 충실히 수행되지 않은 것이 사실이다. 원인으로는 예측이 매우 어려웠을 뿐 아니라, 발생위치가 산지에서 주로 발생하였으며 도심지 및 주택가에서 발생하지 않아 국민들에게 부각되지 않았던 이유도 있다. 본 연구에서는 토석류를 방지하기 위하여 사방댐 등의 대책방안이 수립되어 적용되어 오고 있으나, 단점 및 보완점을 개발하여 새로운 기법을 적용하였다. 또한, 계곡부의 특성 및 형상에 따라 다단계의 유연성 시설물을 설치함하여 인명 및 재산피해를 최소화 할 수 있도록 고안하였다. 대상지역을 2개소 선정하여 적용성에 대한 평가를 실시하고 결과를 제시하였다. 연구결과, Site A, B 지역에 토석류 방지시설이 각각 17개와 13개가 설치요구되었다. 향후 토석류에 대한 체계적인 지침 및 방안에 대하여 정립해 나갈 필요가 있을 것으로 생각된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2310-2316
• /
• 2011

In order to apply Interior Permanet Magnet Synchronous Motor(IPMSM) to the propulsion system of the railway transit, 110 (kW) class IPMSMs with high-power density are designed as a concentrated winding model and a distributed winding model in this study. The concentrated winding model designed in this study is 6 poles/9 slots and the distributed winding model is 6 poles/36 slots. In general, the eddy current losses in the permanent magnets of IPMSM are caused by the slot harmonics. The thermal demagnetization of the magnet by the eddy current losses at high rotational speed often becomes one of the major problems in the IPMSM with a concentrated windings especially. A design to reduce eddy current losses in permanent magnets design is important in IPMSM for the railway vehicle propulsion system which requires high-speed operation. Therefore, a method to devide the permanent magnet is proposed to reduce the eddy current losses in permanent magnet in this study. Authors analyze the variation characteristics of the eddy current losses generated in permanent magnet of the concentrated winding model by changing the number of the division of the permanent magnets.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.230-236
• /
• 2006

For a short-term measurement to reduce an accident on a railroad crossing, it is necessary to find out the weakness and problems of existing equipment in the railroad transportation system. The analysis of railroad crossing accidents shows that main causes of accidents (24.9%) are the careless driving including an engine problem, damage on the safety equipment, slide on the snow, and an engine stop on the railroad crossing. Therefore, it is required to install a sensor, or to make a crossing gate at the exist for detecting obstacles on a railroad to prevent collisions among trains. This paper suggests 'a panel sensor using the strain gauge' to make up the weaknesses of the sensing Dead Zone, which are caused by using a laser method, and to detect any small objects passing railroads in order to reduce the errors, which are occurred in the earth magnetic field for controlling Exit Slide Crossing Arm Detector. The device, suggested in this paper, is verified with detecting any small objects passing the railroad, with judging entry decision clearly, and with controlling passing gate and obstruction warnings/cautions obstacles at the same time, through an experimental test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1117-1124
• /
• 2009

Under frame side sill of rolling stock structure is designed for preventing corrosion in order to meet mechanical requirements. However during long operation time more than 20 years, there are corrosion in the under frame side sill caused by environmental effect, vibration and etc. So, detection and evaluation of the corrosion ill the under frame nondestructive is one of important issues to extend their life time. Most of nondestructive methods are not easy to apply for detecting corrosion in the under frame side sill, since the under frame side sill consist of there layered with different material (stainless steel - stainless steel - mild steel) and each layer is connected by spot weld and plug weld. Fortunately, pulsed eddy current method claimed that it can be measured not only thickness change but also corrosion under their insulation layers. So, in this study, we have investigated performance of pulsed eddy current testing method by measuring thickness variation of fabricate of mock-up specimens. The investigation results obtained from mock-up specimens and the corrosion evaluation results of the aged rolling stocks will be presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1709-1715
• /
• 2011

A track-circuit device exploits two rails as a conductor of an electrical circuit. It detects the presence or absence of the trains with variation of received level when wheel sets of the train shunt rails together. So, it plays an important role in train operation. Non-insulated audio frequency(AF) track-circuit device can separate the rails into tracks by insulated joints without physically cutting the rails. And it transmits AF signals at track boundary, of which frequency is different between adjacent tracks. It has been employed at station-to-station section of domestic high speed rail, general rail, and subway. But It was not used at station yard of complicated general railway where lots of branches exist. In this paper, we consider current development status of non-insulated AF track-circuit device for the use of station yard.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1002-1008
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. there are classified variously according to rail type, sleeper type, fastening system, track type. Construction of concrete track are on the increase recently to secure the safety of track structure as well as to reduce the maintenance cost. SFC fastening system used the plain track a lot and for those reasons, The fast clip turnout demand growing to improving efficiency of the maintenance cost by unification of fastening clip on whole line. in this study is about development of the fastening system for new turnout using fast clip. this fastening system assembled elasticity pad underneath a base plate. its can change stiffness how to adjust contact surface area of elasticity pad Developed fastening system have passed test according to rule of KRS-TR0014-09R (rail fastening system) and Performance Certification by KR.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3299-3305
• /
• 2011

Railroad is considered a representative echo-friendly mode, but there are many civil complaints due to dusts arising in the process of bulk cargo transportation. The freight station which is handling coal are slowly decreasing because of civil complaints. Generally gondolas and hopper cars kinds of freight cars have a role to carry coal such as anthracite and bituminous coal. The railroad competitiveness in the field of bulk cargo transportation is diminishing because there are cost increase and dust emission in the process of transshipment. In this study, we analysed the logistics process of bulk cargo transportation in the point of railroad and we could draw the problems from the logistics process. The results could be used to study various alternatives to improve the process of coal transportation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.287-296
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. A movable nose crossing frog is a device used at a railway turnout to eliminate the gap at the common crossing (High manganese, block, assembly crossing)which can cause impact damage, noise and vibration. Our government has a plan speed up of conventional line to 250km/h semi-high speed. We had already developed flexible turnout with fixed crossing(High manganese) and SFC fastening system can cover in the semi-high speed line In this study is about development of the movable nose crossing turnout available Semi-high speed line on concrete track. This paper describes about geometry, attack angle, bending stress at the nose, switching force, safety of continuous welded long rails. This movable nose crossing turnout is expected greatly increases passing speed of turnout in national railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2735-2744
• /
• 2011

Korean-Automated Guideway Transit (K-AGT) was successfully developed through Light Rail System Development Project. Since then, the domestic development rate of on-board signalling system of light rail has been improved up to 90% by Practical Utilization Project of Light Rail. After utilization project, furthermore, POSCO ICT has developed the wayside signalling system of CBTC, including wireless communication equipment. KRRI carried out the performance test of the wireless communication, interfacing and using the other CBTC equipments of KyungSan Test Line so as to see whether it conforms IEEE 802.11x, international communication standard in view of operational concept of CBTC. In this paper, we presents analysis results of roaming test while train runs.