• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.1
• /
• pp.69-77
• /
• 2012

After lunar explorations were restarted in 1990s, the world space advanced countries have been competing actively to preoccupy the Moon from the 2000s. Korea has been also conducting precedent study on lunar exploration to carry out that by ourselves in 2020. This study analyzed delta-V of various Earth-Moon transfer trajectories for minimization of fuel consumption. Through the simulation, the best Earth-Moon transfer trajectory for Korean lunar mission is suggested and it will be used as useful materials of Korean lunar mission.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.340-340
• /
• 2015

기상이변에 따른 강우강도의 증가는 국지성 집중호우로 나타나게 되고, 이러한 강우양상은 하천에서의 홍수위 증가로 나타나 여러 가지 하천재해가 발생하게 된다. 본 연구에서는 대하천으로 유입되는 지류 합류부에서의 수리학적 특성을 살펴보기 위한 사전 연구로 비교적 규모가 큰 지류하천에 대한 부정류 모의를 수행할 수 있는 홍수추적모형을 구축하였다. 대상 하천은 지류 내 하도가 루프의 형태를 띠고 있는 밀양강을 대상으로 선정하였다. 낙동강의 제1지류인 밀양강에서 낙동강 합류부로부터 30.74 km 상류에 위치한 밀양강의 상동수위관측소를 상류단으로 선정하고 낙동강과 합류하는 밀양강 하류단을 대상구간으로 선정하였다. 상류 경계단인 상동수위관측소에서 측정된 수위자료는 유량자료로 환산하여 상류단 경계조건으로 사용하였으며, 하류단 경계조건은 낙동강 본류의 수산교 수위관측소와 삼랑진 수위관측소에서 측정된 수위자료를 밀양강 합류부까지의 거리 보정을 통해 밀양강 하류단의 수위자료로 사용하였다. 그림 1은 밀양강의 상동수위관측소에서부터 낙동강 합류부까지 구간에 대한 모식도를 나타내고 있으며, 그림 2는 밀양1 지점에 대한 모의결과를 나타내고 있다. 단장천 유입 이후 밀양강 본류가 두 개의 루프형으로 분류되었다가 다시 합류하는 하도의 형태를 가지고 있어 보다 복잡한 검증과정이 요구되었다. 본 연구에서 구축된 밀양강에 대한 수리학적 해석모형은 지류 합류부에서의 배수영향에 의한 수리특성을 분석하는데 활용될 것이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.613-623
• /
• 2012

In this paper, we present an ultra miniaturized voltage tuned oscillator, with HMIC-type amplifier and phase shifter, using LTCC artificial dielectric resonator. ADR which consists of periodic conductor patterns and stacked layers has a smaller size than a dielectric resonator. The design specification of ADR is obtained from the design goal of oscillator. The structure of the ADR with a stacked circular disk type is chosen. The resonance characteristic, physical dimension and stack number are analyzed. For miniaturization of ADRO, the ADR is internally implemented at the upper part of the LTCC substrate and the other circuits, which are amplifier and phase shifter are integrated at the bottom side respectively. The fabricated ADRO has ultra small size of $13{\times}13{\times}3mm^3$ and is a SMT type. The designed ADRO satisfies the open-loop oscillation condition at the design frequency. As a results, the oscillation frequency range is 2.025~2.108 GHz at a tuning voltage of 0~5 V. The phase noise is $-109{\pm}4$ dBc/Hz at 100 kHz offset frequency and the power is $6.8{\pm}0.2$ dBm. The power frequency tuning normalized figure of merit is -30.88 dB.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.42-51
• /
• 1998

This paper suggests a congestion control scheme for CL (ConnectionLess) overlay network using the feedback loops between CL user and CL server, between CL servers, and between end-to-end CL users, and the header translation table of CL server. The CL overlay network for CBDS(Connectionless Broadhand Data Service) defined by ITU-T((International Telecommunication Union-Telecommunication) consists of CL servers which route frames and links which connect between CL user and CL server or between CL servers. In the CL overlay network, two kinds of congestion, CL link congestion and CL server congestion, may occur. We considered the schemes to solve the congestion. link-by-link method[18] has used the ABR feedback loops of ATM layer between CL user and CL server or between CL servers, and the congestion table using header translation table of CL server. As in congestion of output virtual channel this method has an effect on all the traffic transmitting through the link, then it has an effect on the traffic that has not caused the congestion. As a result, the link utilization of output virtual channel that does not bring the congestion and outputs the traffic is decreased. To overcome this drawback of link-by-link, we proposed the hybrid method that are using the ABR feedback loops of link-by-link method, the feedback loop between CL users in end-to-end, the congestion table using and the header translation table. This scheme deals with teh congestion immediately by link-by-link loops and the header translation table, and then regulates the sending rate of CL user that causes the congestion by end-to-end loop.