• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.276-285
• /
• 2006

When polluted stream water was treated with biological aerated filter(BAF) in pilot plant, all operation with 90, 60, 45 and 30 min of EBCT at fixed $0.1m^3air/m^2min$ of aeration showed 80% or higher treatment efficiency of particle materials(SS, turbidity and Chl.-a) and 85% or higher efficiency of ammonia nitrogen removal. It was thought that, in case of BOD, biological stability may sufficiently be assured with BAF because grade III or IV inflow water was changed to grade I for outflow water. In case of $COD_{Mn}$, about 60% of removal efficiency was found. When the mechanism of the result was investigated, about 30% of COD materials was produced by algae clogged in the reactor. There was almost no biological decomposition because specific substrate utilization rate of algogenic organic materials were $0.0245mg{\cdot}COD_{Mn}/mg{\cdot}VSS{\cdot}day$, thus partial backwashing(washing the media in 1 m upper of the reactor once a day) was required. It is thought that elevation of removal rate about 10% of $COD_{Mn}$ and 5.5% of $BOD_5$ could be obtained with partial backwashing resulting in assurance of biologically more stable raw water and that saving backwashing water may be significant.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.685-690
• /
• 2014

The treatment of combined sewer overflow (CSO) is one of potential concerns in domestic wastewater treatment in Korea due to the pre-announce of CSO regulations. This work investigated the effects of disinfectant (NaOCl) concentration (0.11 to 4.0 mg $Cl_2/L$), pH (6.5 to 8.0), temperature (15 to $25^{\circ}C$), ammonia (10 to 41 mg N/L), and suspended solids (91 to 271 mg SS/L) on the chlorine disinfection of CSO. The effect of NaOCl concentration on the pseudo-$1^{st}$ order reaction rate for total coliform inactivation was described well with a saturation-type model with the half-velocity constant of 1.212 mg/L. The total coliform inactivation reaction rate decreased with SS and pH, and increased with temperature. Ammonia in the examined range did not affect the disinfection kinetics. A chlorine contact tank with the injection chlorine level of 1 mg $Cl_2/L$ and the hydraulic retention time of 1.25 min is estimated to reduce total coliform from $1{\times}10^5MPN/mL$ to 1,000 MPN/mL at 271 mg SS/L, $15^{\circ}C$, and pH 8.0. Chlorine would be a proper option for the disinfection of CSO.

• Korean Journal of Food Science and Technology
• /
• v.4 no.3
• /
• pp.200-205
• /
• 1972

Effects of several different petroleum fractions (LGO, HGO, VGO, Diesel oil, SP(E), HGO-wax, L/M-wax), stepwise addition of calculated amounts of HGO at defined intervals, recycling of spent media on cell growth of Candida tropicalis KIST 351 were studied using $2.5{\ell}$ fermenter by batch process. In addition, continuous cultivation of the yeast was also performed in the light of biomass production using $28{\ell}$ fermenter with LGO. 1) Cell concentration, yield on the basis of gas oil and n-paraffin with the petroleum fractions were in the range of $11{\sim}15g/{\ell}$, $10{\sim}12%$ and $77{\sim}82%$, respectively. 2) By stepwise addition of the gas oil, cell concentration and yield on the oil were increased up to 18.9 g/land 13%, respectively. 3) Spent medium slowed emulsifying ability of hydrocarbon and stimulating effect on the cell growth. Without additional supplementation of $Mg^{++}$ up to 20% of spent medium could be reused, while by adding of the $Mg^{++}$, 50% of medium could be recycled. 4) Optimum condition of continuous cultivation for biomass production was attained at the dilution rate of $D=0.1{\sim}0.125\;hr^{-1}$. Maximum yield coefficient on consumed n-paraffin was 0.94 at $D=0.1\;hr^{-1}$, however, 24% of supplied n-paraffin in the media was not utilized at this dilution rate.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.24-32
• /
• 1977

According to the chlorous salt method, most of holocellulose whose lignin was removed, was obtained. In extracting xylan from holocellulose by the different densities of alkali, 5% KOH was extracted three times but still there remained part of xylan in it and another composite of hemicellulose and cellulose was obtained. The extraction of 10% and 20% KOH showed a desirable result. Rather than the ordinary method to use a large quantity of ethanol in the precipitation isolation of xylan, the method to use a small quantity of ethanol in adopting the dialysis with cellophane-membrane by condensing density to one tenth, made il possible to extract a high purity xylan in a high retrieving rate. In isolating glucomannan, the residue of 5% KOH extraction contained a large quantity of xylan, the residue of 10% and 24% KOH extraction, also showed the same result and the comparison between glucose and mannose was approximately 1 : 1. The purification of Fehling solution made it possible to obtain comparatively pure xylan but the process of oxidation dissolution was complicated and the retrieving rate was low. This was not a good method. The ethanol titration purified a high purity xylan in a high retrieving rate and was a very excellent purifying method, considering its simple and easy process. These two purifying methods, however, could not completely remove the residue of arabinose. This will be examined and reported later.

• Journal of Korea Water Resources Association
• /
• v.46 no.11
• /
• pp.1115-1128
• /
• 2013

The purpose of this study is to evaluate the suspended solids and eutrophication processes relationships in Chungju lake using CE-QUAL-W2, two-dimensional (2D) longitudinal/vertical hydrodynamic and water quality model. For water quality modeling, the lake segmentation was configured as 7 branches system according to their shape and tributary distribution. The model was calibrated (2010) and validated (2008) using 2 years of field data of water temperature, suspended solids (SS), total nitrogen (TN), total phosphorus (TP) and algae (Chl-a). The water temperature began to increase in depth from April and the stratification occurred at about 10 m early July heavy rain. The high SS concentration of the interflow density currents entering from the watershed was well simulated especially for July 2008 heavy rainfall event. The simulated concentration range of TN and TP was acceptable, but the errors might occur form the poor reflection for sedimentation velocity of nitrogen component and adsorption-sediment of phosphorus in model. The concentration of Chl-a was simulated well with the algal growth patterns in summer of 2010 and 2008, but the error of under estimation may come from the use of width-averaged velocity and concentration, not considering the actual to one side inclination by wind effect.

• Clean Technology
• /
• v.6 no.2
• /
• pp.113-119
• /
• 2000

Due to the toxicity of dioxin in the incinerator flue gas, it becomes a severe social problem. Activated carbon adsorption process is one of the methods for removing dioxin in the flue gas and was investigated its performance for removing hazardous organic compounds. Since dioxin is very hazardous material, 1,2-dichlorobenzene(o-DCB), one of the precursor material of dioxin, was used as adsorbate. The effects of air flow rate, pressure drop in the bag filter, operation temperature of bag filter, and kinds of adsorbents on the removal of o-DCB were measured and analysed. Experimental results showed that the operating temperature was recommended within the range of $140{\sim}170^{\circ}C$ considering the operating condition of incinerator. Also it was necessary to maintain the pressure drop of bag filter $120mmH_2O$ for enhancing the adsorption at the surface layer of activated carbon formed on the bag filter. The use of mixture of same amount of activated carbon and diatomite showed more than 90% removal of o-DCB and also reduced the consumption of activated carbon.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.543-563
• /
• 1999

For hazardous air pollutants(HAP) such as NO and $NO_2$ decomposition efficiency, power consumption, and applied voltage were investigated by SPCP(surface induced discharge plasma chemical processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of HAP with various electric frequencies(5~50 kHz), flow rates(100~1,000 mL/min) initial concentrations(100~1,000 ppm), electrode materials(W, Cu, Al), electrode thickness(1, 2, 3 mm) and number of electrode windings(7, 9, 11) were measured. Experimental results showed that for the frequency of 10 kHz, the highest decomposition efficiency of 94.3% for NO and 84.7% for $NO_2$ were observed at the poser consumptions of 19.8 and 29W respectively and that decomposition efficiency decreased with increasing frequency above 20 kHz. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. Decomposition efficiency was increased with increasing thickness of discharge electrode and the highest decomposition efficiency was obtained for the electrode diameter of 3mm in this experiment. As the electrode material, decomposition efficiency was in order : tungsten(W), copper(Cu), aluminum(Al).

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.368-375
• /
• 2012

To decrease the intake of animal fat and cholesterol, the changes in the physicochemical characteristics of beef loin cooked through different methods (boiling, steaming, baking, and frying) were investigated. The cooking weight loss, moisture drain rate, and cholesterol drain rate were highest during frying, whereas the lipid drain rate was highest during boiling. The pH value increased markedly during steaming, the acid value of meat fat increased remarkedly during boiling, and the refractive index of meat fat increased notably upon frying. The hardness of meat was remarkedly increased by steaming. The gumminess and chewiness of meat were notably increased by frying. The springiness slightly decreased during all the cooking methods, and the cohesiveness was not significantly affected by any cooking process. The CIE $L^*$ (lightness) value increased markedly during boiling, the CIE $a^*$ (redness) value decreased markedly during both boiling and steaming, and the CIE $b^*$ (yellowness) value decreased notably during all the cooking methods. The fatty acid composition did not significantly change after cooking, except when the meat was fried. Therefore, boiling is an effective cooking method for beef loin to decrease the intake of animal fat.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.87-93
• /
• 2009

This study was carried out to suggest an effective cooking method for pork bellies to decrease intake of animal fat. The physico-chemical characteristics of pork bellies cooked by different methods (boiling, steaming, baking and frying) were investigated. The moisture contents of cooked meats decreased but crude lipid contents increased. The cooking losses, moisture drain rates, and lipid drain rates were high after frying and boiling. The pH values increased markedly with boiling and both the acid value and the refraction index of the fat significantly increased with frying. The hardness, gumminess, and chewiness of the meat increased considerably with boiling, but decreased notably after frying. The springiness decreased very much with boiling and cohesiveness greatly increased with steaming. The CIE $L^*$ (lightness) value increased notably with steaming but decreased markedly with frying. The CIE $a^*$ (redness) value decreased markedly with all cooking methods, especially boiling, and the CIE $b^*$ (yellowness) value decreased with both boiling and steaming but increased with both baking and frying. The fatty acids of fat from the raw pork bellies were primarily oleic acid (42.4%), palmitic acid (23.9%), and linoleic acid (16.1%). The ratio of total monounsaturated fatty acids to total saturated fatty acids was 1.190 and the ratio of total polyunsaturated fatty acids to total saturated fatty acids was 0.446. In addition, the composition of fatty acids was not significantly changed with any cooking method except frying. Therefore, boiling is the effective cooking method for pork bellies to decrease intake of animal fats.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.91-102
• /
• 2012

As the basis of the environmental ecological river management, this research developed a method of habitat classification using imagery information to understand a distribution characteristics of fish living in a natural river. First, topographic survey and investigation of discharge and water temperature were carried out to analyze hydraulic characteristics of fish habitat, and the unmanned aerial photography was applied to acquire river imagery at the observation time. Riffle, pool, and glide regions were selected as river habitat to analyze fish distribution characteristics. Analysis showed that the standard deviation of RGB on the riffle is higher than pool and glide because of fast stream flow. From the classification accuracy estimation on riffle region according to resolution and kernel size using the characteristics of standard deviation of RGB, the highest classification accuracy was 77.17% for resolution with 30cm and kernel size with 11. As the result of water temperature observation on pool and glide using infrared camera, they were $19.6{\sim}21.3^{\circ}C$ and $15.5{\sim}16.5^{\circ}C$ respectively with the differences of $4{\sim}5^{\circ}C$. Therefore it is possible to classify pool and glide region using the infrared photography information. The habitat classification to figure out fish distribution can be carried out more efficiently, if unmanned aerial photography system with RGB and infrared band is applied.