• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.4-4
• /
• 2007

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.105-105
• /
• 2003

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.123-123
• /
• 2003

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.137-137
• /
• 2004

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1997.05a
• /
• pp.64-65
• /
• 1997

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1273-1274
• /
• 2011

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.51-51
• /
• 2000

한국진공연구조합의 회원으로 등록 활동하고 있는 당사는 각종 반도체 공정에서 화학적으로 인정하고 불활성인 이태리 AUSIMONT사의 FOMBLIN oil, 진공 그리이스, 환경 친화적인 불소계 용제(FOMBLIN PFS-1), PTFE sheet와 gasket(Italy GUARNIFLON), 비석면 재질로서 내마모성 및 내구성이 뛰어난 로타리 베인 펌프용 vane을 공급하고 있다.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.17-24
• /
• 2002

Activated carbons were prepared from pine bark by steam activation, and pore structures and specific surface areas were then investigated. Three different types of kilns were used for the activation. When the stationary-vertical-or stationary-horizontal-type kiln was used for the steam activation to prepare an activated carbon from the bark, it was not possible to produce activated carbon having high specific surface areas exceeding 1,000 $m^2／g$. Using bark powder improved the specific surface area, but it was still not high enough. When the rotary-horizontal-type kiln was used for the activation, the activated carbons prepared had high specific surface areas of more than 1,000$m^2／g$, which was similar to a commercial first-grade activated carbon. The activated carbon prepared by the rotary kiln had a wide distribution of pore size ranging from microporous to mesoporous.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.904-909
• /
• 2009

In this paper, a rolling piston rotary compressor having a combined vane and roller unit has been introduced. In a conventional rotary compressor, sliding motion takes place between the vane nose and roller. By combining the vane and the roller in one unit, gas leakage through a clearance between the vane nose and the roller can be eliminated, and the frictional loss between them can also be reduced to almost nought. Compressor model with the combined vane and roller has been fabricated and tested in a compressor calorimeter and computer simulation program has been developed to confirm merits of the new mechanism. In a test, cooling capacity has been found to be increased by 1.4%, and the compressor input decreased by 0.3%, resulting in 1.7% increased in EER. Simulation program confirmed the calorimeter test results and the merits of the new model as mentioned above.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.2
• /
• pp.29-37
• /
• 2008

Air supply is required to the cathode of fuel cells for the provision of oxygen to produce electricity through chemical reaction with hydrogen in the cell, and supplied air should be free of impurities such as oil mist and tiny particles separated from sliding surfaces. Hence, air compressor for fuel cell air supply must be oil-less type and have no severe sliding surfaces inside. This paper introduces the concept of single-vane type rotary air compressor whose structure is particularly suitable for the fuel cell application: sliding action of the vane against the cylinder wall, which causes severe friction in the conventional vane rotary compressors, is made to be prevented by attaching the vane to the driving shaft with the compliant device between the vane and the rotor in this new design. For 2 kW fuel cell application, preliminary design has been carried out, and its performance has been estimated by using computer simulation program: for discharge pressure of 2 bar, the volumetric, adiabatic, and mechanical efficiencies are calculated to be 82.5%, 92.5%, and 96.3%, respectively.