• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제45권6호
• /
• pp.26-34
• /
• 2008

The information of traversability and path planning is essential for UGV(Unmanned Ground Vehicle) navigation. Such information can be obtained by analyzing 3D terrain. In this paper, we present the method of 3D terrain modeling with color information from a camera, precise distance information from a 2D Laser Range Finder(LRF) and wheel encoder information from mobile robot with less data. And also we present the method of 3B terrain modeling with the information from GPS/IMU and 2D LRF with less data. To fuse the color information from camera and distance information from 2D LRF, we obtain extrinsic parameters between a camera and LRF using planar pattern. We set up such a fused system on a mobile robot and make an experiment on indoor environment. And we make an experiment on outdoor environment to reconstruction 3D terrain with 2D LRF and GPS/IMU(Inertial Measurement Unit). The obtained 3D terrain model is based on points and requires large amount of data. To reduce the amount of data, we use cubic grid-based model instead of point-based model.

• Journal of Institute of Control, Robotics and Systems
• /
• 제17권6호
• /
• pp.513-520
• /
• 2011

This paper presents the motion planning of robotic vehicles for the path tracking and the obstacle avoidance. To follow the given path, the vehicle moves through the turning radius obtained through the pure pursuit method, which is a geometric path tracking method. In this paper, we assume that the vehicle is equipped with a 2D laser scanner, allowing it to avoid obstacles within its sensing range. The turning radius for avoiding the obstacle, which is inversely proportional to the virtual force, is then calculated. Therefore, these two kinds of the turning radius are used to generate the steering angle for the front wheel of the vehicle. And the vehicle reduces the velocity when it meets the obstacle or the large steering angle using the potentials of obstacle points and the steering angle. Thus the motion planning of the vehicle is done by planning the steering angle for the front wheels and the velocity. Finally, the performance of the proposed method is tested through simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1348-1351
• /
• 1997

The federated Kaman filter(FKF) is being widely used in many multisensor navigatiion systems. It is know that the FKF has advantages of simplicity and fault-tolerance over other decentralized filter techniques. In this paper, optimal and suboptimal FKF configuratiions are mentioned and a covariance analysis technique for the suboptimal FKF is newly presented. The suboptimal FKF configuration, known as No-reset(NR) mode, has better fault tolerance capability than the optimal FKF coniguratioin. In the suggested technique, a suboptimal fusion process of FKF is considered a swell as suboptimal gains of local filters. An upper boun of error covariance for suboptimal FKF is derived. Also, it is mathematically shown that this bound is smaller thanexisting bound in the literatrue. A vehicle-navigaion system is designed using the FKF. In thissystem, a map constraing equation is introduced and used as a measurement equatioin of Kalman filter. Performance analysis is done by the suggested covariance analysis techniques.

• Journal of Institute of Control, Robotics and Systems
• /
• 제20권12호
• /
• pp.1278-1283
• /
• 2014

This study proposes a NN (Neural Networks)-based adaptive control method for a 6X6 skid-type UGV (Unmanned Ground Vehicle) with 6 in-wheel motors. The UGV experiences lots of uncertainties and, thus, the control performance can degrade significantly without a compensation of the unknown terms. To improve the control performance of the UGV, the NN is utilized to design the adaptive controller. Then, the designed overall force and moment are optimally distributed into 6 traction forces with the assumption that six vertical forces of the UGV are known exactly, because the six traction forces are original source to be excited to the UGV to move. Finally, numerical simulations with the TruckSim model are performed to validate the effectiveness of the proposed approach.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권2호
• /
• pp.146-154
• /
• 2000

An $H\infty$ controller is designed for active suspensions of vehicles using 7-degree-of-freedom full-car model. Its performance robustness as well as stability robustness to system parameter variations and unmodelled dynamics are assured through the $\mu$-framework. The performance of the $H\infty$ controller is compared with that of a LQC controller in compute simulations. From the simulations it is found that the active suspension with the $H\infty$ controller reduces the acceleration and motion of the sprung mass in the heaving rolling and pitching directions when the car is driven on a normal road or through an asymmetric bump. The suspension stroke and the road holding capability are also improved with a relatively small level of power consumption. Overall the $H\infty$ controller shows a more robust performance than that of the LQG design.

• Journal of Institute of Control, Robotics and Systems
• /
• 제11권12호
• /
• pp.1002-1010
• /
• 2005

We study on the implementation of reconfigurable position control system which is based on Open Control Platform(OCP) for Unmanned Expedition Vehicles(UEV) in ubiquitous environment. The control system uses hierarchical control structure and OCP structure which contains three layers such as core OCP, reconfigurable control API(Application Programmer Interface), generic hybrid control API. The goal of our research is to implement an UEV control system using advanced software technology. As a specific control problem, we study a transition management problem between PID control and neural network control depending on fault or parameter change of the plant, i.e., UEV. The concept of the OCP-based software-enabled control can provide synergy effect by the integration of software component, middleware, network communication, and control, and thus can be applied to various systems in ubiquitous environment.

• Journal of Institute of Control, Robotics and Systems
• /
• 제17권12호
• /
• pp.1256-1265
• /
• 2011

Automated parking assist systems are being commercialized and rapidly spread in the market. In order to improve odometry accuracy, we proposed a practical odometry calibration scheme of Car-Like Mobile Robot (CLMR). However, there were some open problems in our prior work. For example, it was not clear whether the kinematic parameters always converged or not using the proposed calibration scheme. In addition, test driving had to be carried out "twice" without detailed explanation. This research aims to provide answers for the addressed questions though the convergence property analysis of the calibration scheme. In this paper, we evaluate on the effect of the kinematic parameter error on the odometry error at the final pose by numerical computation. The evaluation will show that the wheel diameter and tread of the CLMR can be calibrated by iterative test drives. In addition, the region of convergence in the parametric space will be discussed. Presented experimental results clearly showed that the proposed calibration scheme would be useful in practical applications.

• Korean Journal of Construction Engineering and Management
• /
• 제10권1호
• /
• pp.136-145
• /
• 2009

The objective of the Intelligent Excavation System (IES) is to recognize the work environment and produce work plan and automatically control the excavator through integrating sensor and robot technologies. This paper discusses one of the core technologies of IES development project, development of 3D work environment modeling. 3D laser scanner is used for 3-dimensional mathematical model that can be visualized in virtual space in 3D. This paper describes (1) how the most appropriate 3D imaging system has been chosen; (2) the development of user interface and customization of the s/w to control the scanner for IES project; (3) the development of the mobile station for the scanner; (4) and the algorithm for the automatic registration of laser scan segments for IES project. The development system has been tested on the construction field and lessons learned and future development requirements are suggested.

• Electronics and Telecommunications Trends
• /
• 제21권1호통권97호
• /
• pp.57-67
• /
• 2006

차세대 임베디드 시스템은 언제 어디에서나 통신, 방송 등의 통신 인프라를 통해 정보를 주고 받을 수 있으며, 다양한 서비스를 사용자에게 편리하고 안전하게 제공할 수 있는 휴대 가능한 IT 장치를 말하며, 이러한 장치상에 탑재되어 서비스 제공자, 콘텐츠제공자, 인프라 운영자, 서비스 개발자, 단말 개발자 등의 단말 사용자에게 개방형 서비스를 가능케 하는 프레임워크가 차세대 임베디드 시스템을 위한 소프트웨어 플랫폼이다. 대표적으로 차량을 기반으로 다양한 서비스를 제공하는 텔레매틱스 단말, 개인의 휴대성을 지향하는 스마트폰, 멀티미디어 정보를 개인화하는 PMP 및 홈네트워크연동을 통하여 다양한 서비스를 제공하는 가정용 지능형 로봇 등이 있다. 본 고에서는 상기 단말에 대한 소개를 통해 개념을 살펴보고, 부가가치를 창출하기 위한 서비스 제공이 가능하도록 하는 소프트웨어 플랫폼의 제공 요소에 대해 언급하고, 소프트웨어플랫폼의 현황과 동향을 파악하기 위해 관련 단말의 시장 현황을 살펴봄으로써 차세대임베디드 소프트웨어 플랫폼 기술이 나야가야 할 방향을 알아보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제37권1호
• /
• pp.25-30
• /
• 2013

In military vehicles moving over poor roads, severe vibration of the chassis can damage internal components. Currently, many studies have focused on active and semi-active suspensions to reduce the vibration of the chassis. In this study, a vibration reduction technique is suggested by applying a unique rotating suspension structure. SH-ADD, a type of modified Skyhook, was selected as a controller for vibration reduction. A random ISO class E road was selected as the driving road. The simulation was performed using ADAMS Control and Matlab Simulink. The control result was compared with the RMS acceleration with a focus on the cumulative fatigue of the internal equipment.