• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.41-49
• /
• 2017

In the acquisition program, the conceptual design is the most important step toward specifying the military objectives, establishing requirements and determining future developmental directions, of a target system. However, if both the requirements and directions are incorrectly set due to the lack of development experiences and literature backgrounds in the target systems, such as future ground combat vehicles, it may become a major risk in the future design phases and the entire acquisition program. In order to correct these errors in the future phases, time, effort and cost are required. Therefore, it is necessary to reduce the errors that occur in the initial stages to effectively acquire the future ground combat vehicles. This paper describes the initial design method for verifying the requirements and the developmental directions and estimating the system performance at the conceptual design through the system-level physical modeling and simulation (M&S) and the target system performance analysis. The system-level physical M&S use cutting-edge design tools, model-based designs and geometric-based designs. The system performance estimation is driven from the results of the system-level physical M&S and the specialized system analysis software.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.18-29
• /
• 2022

Recently, cooperative intelligent transport systems (C-ITS) testbeds have been deployed in great numbers, and advanced autonomous driving research using V2X communication technology has been conducted actively worldwide. In particular, the broadcasting services in their beginning days, giving warning messages, basic safety messages, traffic information, etc., gradually developed into advanced network services, such as platooning, remote driving, and sensor sharing, that need to perform real-time. In addition, technologies improving these advanced network services' throughput and latency are being developed on many fronts to support these services. Notably, this research analyzed the network latency requirements of the advanced network services to develop a remote driving service for the droid type low-speed robot based on the 3GPP C-V2X communication technology. Subsequently, this remote driving service's performance was evaluated using system modeling (that included the operator behavior) and simulation. This evaluation showed that a respective core and access network latency of less than 30 ms was required to meet more than 90 % of the remote driving service's performance requirements under the given test conditions.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.157-166
• /
• 2024

The Army TIGER System, which is being deployed to implement a future combat system, is expected to bring innovative changes to the army's combat methods and comabt execution capability such as mobility, networking and intelligence. To this end, the Army will introduce various systems using drones, robots, unmanned vehicles, AI(Artificial Intelligence), etc. and utilize them in combat. The use of various unmanned vehicles and AI is expected to result in the introduction of equipment with new technologies into the army and an increase in various types of transmitted information, i.e. data. However, currently in the military, there is an acceleration in research and combat experimentations on warfigthing options using Army TIGER forces system for specific functions. On the other hand, the current reality is that research on cyber threats measures targeting information systems related to the increasing number of unmanned systems, data production, and transmission from unmanned systems, as well as the establishment of cloud centers and AI command and control center driven by the new force systems, is not being pursued. Accordingly this paper analyzes the structure and characteristics of the Army TIGER force integration system and makes suggestions for necessity of building, available cyber defense solutions and Army TIGER integrated cyber protections system that can respond to cyber threats in the future.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.17-21
• /
• 2015

There have been sustained developments of advanced technologies using traffic safety facilities recently and techniques for identifying failure modes and devices which could result in fatal outcomes. The purpose of this research is aimed at improving the driving conditions in advance through analyzing the IT convergence, driving education, researches for vehicles, field of construction and robotics. The researchers evaluate on usability tests of the driving with 26 candidates through focusing on safety, convenience, efficiency, effectiveness. Using specialized LED panel to enhance driving performances of disabled people are for cautious road conditions like foggy weather or heavy rain. As a result, there were improvements in the driving conditions, and candidates reported this system was helpful. It allows them for maintaining proper driving all times and was especially informative for people with low vision or visually impaired. This system plays a pivotal role as a prevention mechanism not only for regular drivers but also for further delict of traffic violations or accident offenders who already have former record on tort.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.182-184
• /
• 2009

FlexRay is a new standard of network communication system which provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for future automotive and ship applications. FlexRay communication controller(CC) is the core of the FlexRay protocol specification. In this paper, we first design the FlexRay CC protocol specification and function parts using SDL(Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay CC system was synthesized using Samsung $0.35{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 80 MHz. In addition, to show the validity of the designed FlexRay system, the FlexRay system is combined with sound source localization system in Robot applications. The combined system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.845-850
• /
• 2021

In this study, the energy conversion characteristics and design of electric vehicle (EV: Electric Vehicle) powertrain were performed. An interior permanent magnet synchronous motor (IPMSM) was targeted as a power source for the EV powertrain, and control was performed. In order to drive the IPMSM, two regions are considered: a constant torque and a constant output (field-weakening) region. The design of the control system for IPMSM was constructed based on the d-q reference frame (vector control). To determine the static characteristics of motor torque appearing in two areas of IPMSM, a torque control system and a d axis current control system of IPMSM were implemented and proposed. Matlab-Simulink software was used for characteristic analysis. Finally, by applying IPMSM to the powertrain model under the actual EV vehicle level conditions, simulation results of the proposed control system were performed and characteristics were analyzed.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.14-19
• /
• 2021

This paper presents LiDAR static obstacle map based vehicle dynamic state estimation algorithm for urban autonomous driving. In an autonomous driving, state estimation of host vehicle is important for accurate prediction of ego motion and perceived object. Therefore, in a situation in which noise exists in the control input of the vehicle, state estimation using sensor such as LiDAR and vision is required. However, it is difficult to obtain a measurement for the vehicle state because the recognition sensor of autonomous vehicle perceives including a dynamic object. The proposed algorithm consists of two parts. First, a Bayesian rule-based static obstacle map is constructed using continuous LiDAR point cloud input. Second, vehicle odometry during the time interval is calculated by matching the static obstacle map using Normal Distribution Transformation (NDT) method. And the velocity and yaw rate of vehicle are estimated based on the Extended Kalman Filter (EKF) using vehicle odometry as measurement. The proposed algorithm is implemented in the Linux Robot Operating System (ROS) environment, and is verified with data obtained from actual driving on urban roads. The test results show a more robust and accurate dynamic state estimation result when there is a bias in the chassis IMU sensor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.1
• /
• pp.45-55
• /
• 2013

With the recent advancement of control method and battery technology, the electric vehicle have been researched to replace the conventional vehicle with electric vehicle with the view point of the environmental concerns and energy conservation. An electric vehicle which is equipped with the independent front steering system and in-wheel motors has advantage in terms of control. For example, the different torque which generated by left and right wheels directly can make yaw moment and the independent steering using outer wheel control is able to reduce the sideslip angle. Using of independent steering and driving system, the 4 wheel electric vehicle can improve a performance better than conventional vehicle. In this paper, we consider the method for improving the cornering performance of independent front steering system and in-wheel motor used electric vehicle with the compensated outer wheel angle and direct yaw moment control. Simulation results show that the method can improve the cornering performance of 4 wheel electric vehicle. We also apply the steering motor failure to steer the vehicle turned by the torque difference without steering. This paper describes an independent front steering and driving, consist of three parts; Vehicle Model, Control Algorithm for independent steering and driving and simulation. First, vehicle model is application of TruckSim software for independent front steering and 4 wheel driving. Second, control algorithm describes the reduced sideslip and direct yaw moment method in view of cornering performance. Last is simulation and verification.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.121-129
• /
• 2015

This paper presents a multiple vehicle recognition algorithm based on radar and vision sensor fusion for lane change assistance. To determine whether the lane change is possible, it is necessary to recognize not only a primary vehicle which is located in-lane, but also other adjacent vehicles in the left and/or right lanes. With the given sensor configuration, two challenging problems are considered. One is that the guardrail detected by the front radar might be recognized as a left or right vehicle due to its genetic characteristics. This problem can be solved by a guardrail recognition algorithm based on motion and shape attributes. The other problem is that the recognition of rear vehicles in the left or right lanes might be wrong, especially on curved roads due to the low accuracy of the lateral position measured by rear radars, as well as due to a lack of knowledge of road curvature in the backward direction. In order to solve this problem, it is proposed that the road curvature measured by the front vision sensor is used to derive the road curvature toward the rear direction. Finally, the proposed algorithm for multiple vehicle recognition is validated via field test data on real roads.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.297-305
• /
• 2017

As the development of autonomous vehicles becomes realistic, many automobile manufacturers and components producers aim to develop 'completely autonomous driving'. ADAS (Advanced Driver Assistance Systems) which has been applied in automobile recently, supports the driver in controlling lane maintenance, speed and direction in a single lane based on limited road environment. Although technologies of obstacles avoidance on the obstacle environment have been developed, they concentrates on simple obstacle avoidances, not considering the control of the actual vehicle in the real situation which makes drivers feel unsafe from the sudden change of the wheel and the speed of the vehicle. In order to develop the 'completely autonomous driving' automobile which perceives the surrounding environment by itself and operates, ability of the vehicle should be enhanced in a way human driver does. In this sense, this paper intends to establish a strategy with which autonomous vehicles behave human-friendly based on vehicle dynamics through the reinforcement learning that is based on Q-learning, a type of machine learning. The obstacle avoidance reinforcement learning proceeded in 5 simulations. The reward rule has been set in the experiment so that the car can learn by itself with recurring events, allowing the experiment to have the similar environment to the one when humans drive. Driving Simulator has been used to verify results of the reinforcement learning. The ultimate goal of this study is to enable autonomous vehicles avoid obstacles in a human-friendly way when obstacles appear in their sight, using controlling methods that have previously been learned in various conditions through the reinforcement learning.