• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.623-626
• /
• 2011

자동차를 위한 전방향(omnidirectional) 감시 시스템 같은 감시 시스템, 로봇의 시각 역할 등 다양한 비젼 시스템에서 카메라가 장착되어 사용되고 있다. 광각 카메라에서 획득한 영상은 비선형적인 방사 왜곡을 가지고 있어서 정확한 영상을 획득하기 위해서는 왜곡 보정 작업을 수행하여야 한다. 카메라로부터 입력되는 왜곡 영상을 실시간으로 보정하기 위해서는 많은 연산량을 요구하므로 임베디드 환경에서는 왜곡 보정을 위해 별도의 시스템을 추가하거나 SOC 형태로 개발한 전용 H/W를 추가한다. 본 논문에서는 왜곡 보정 과정에 필요한 연산들을 분석하고, 연산량을 줄일 수 있는 개선된 왜곡 보정 방법을 제안한다. 또한, ARM11 기반 임베디드 환경에서 제안한 왜곡 보정 방법을 직접 구현하여 성능을 평가함으로써 임베디드 환경에서 추가의 시스템이나 추가의 비용없이 왜곡 보정을 수행할 수 있음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.292-296
• /
• 2001

Nuclear regulation requires a periodic visual test for inside structures of reactor to guarantee safe operation of nuclear power plant. However, existing visual test, which is proceeded manually, needs lots of time and labor. Even more, test workers should be exposed in radioactive environment during the test. An underwater robot system has being studied for more efficient and safer test. The position and pose estimation are important issue for the movement control of the robot. An algorithm was presented in this paper, which estimate the location and pose of the underwater robot clearly using vision system.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.71-79
• /
• 1997

This paper introduces a methodology of the precise control of a mobile/task robot using visual information captured bythe camera attached at the hand of the task robot. The major problem residing in the precise control of mobile/task robot is providing an accurate and stable base for the task robot through the precise control of mobile robot. On account of uncertainties on the surface, the precise control of mobile robot is not feasible without using external position sensor. In this paper, the methodology for the precise control of mobile robot is proposed, which recognizes the position of mobile robot using the camera attached at the hand of the task robot. While the task robot is approaching to an assembly part, the position of mobile robot is measured using the line correspondence between the image capturesd by the camera and the real assembly part, and using the kinematic transformation from the hand of the task robot to the mobile robot. To verify the solidness of this method, experimental data for the measurement of camera position/orientation and for the precise control of mobile robot using measurement are shown.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.590-593
• /
• 2001

In this paper we describe the 6-axes robot's position determination using a stereo vision and an image based control method. When use a stereo vision, it need a additional time to compare with mono vision system. So to reduce the time required, we use the stereo vision not image Jacobian matrix estimation but depth estimation. Image based control is not needed the high-precision of camera calibration by using a image Jacobian. The experiment is executed as devide by two part. The first is depth estimation by stereo vision and the second is robot manipulator's positioning.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.571-578
• /
• 1999

In this paper, we propose a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants, workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.559-563
• /
• 2000

In this paper we describe a method for aligning a robot gripper using image information. The region of gripper is represented from HSI color model that has major advantage of brightness independence. In order to extract the feature points for vision based position control, we find the corners of gripper shape using polygonal approximation method which determines the segment size and curvature of each points. We apply the vision based scheme to the task of alignment of gripper to reach the desired position by 2 RGB cameras. Experiments are carried out to exhibit the effectiveness of vision based control using feature points from polygonal approximation of gripper.

• Journal of Biosystems Engineering
• /
• 제32권1호
• /
• pp.44-49
• /
• 2007

A stereo vision system was developed for robot milking system (RMS) using two monochromatic cameras. An algorithm for inverse perspective transformation was developed for the 3-D information acquisition of all teats. To verify performance of the algorithm in the stereo vision system, indoor tests were carried out using a test-board and model teats. A real cow and a model cow were used to measure distance errors. The maximum distance errors of test-board, model teats and real teats were 0.5 mm, 4.9 mm and 6 mm, respectively. The average distance errors of model teats and real teats were 2.9 mm and 4.43 mm, respectively. Therefore, it was concluded that this algorithm was sufficient for the RMS to be applied.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.73-79
• /
• 2003

Recently, the tole-robot operations to an unstructured environment have been widely researched. The human's interaction with the tole-robot system can be used to improve robot operation and performance for an unknown environment. The exact modeling based on real environment is fundamental and important process for this interaction. In this paper, we propose an extrinsic parameter calibration and data augmentation method that only uses a circular jig in the hand-eye laser virtual environment. Compared to other methods, easier estimation and overlay can be done by this algorithm. Experimental results using synthetic graphic demonstrate the usefulness of the proposed algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2475-2478
• /
• 2002

This paper consider's the problem of exploring an unfamiliar environment in search of recognizable objects of visual landmarks. In order to extract and recognize them automatically, a feature map is constructed which records the set of features continually during a learning phase. The map contains photometric geometric, and metric information of each feature. Meanwhile, the localization algorithm can determine the position of the robot by extracting features and matching in the map. These procedures are implemented and tested using an AMR, and preliminary results are presented in this paper.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.19-33
• /
• 2000

In this paper, we propose anew approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants, workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator model.