• Title/Summary/Keyword: 로봇보정

Search Result 234, Processing Time 0.034 seconds

Correction of Traveling Error for a Mobile Robot Using a Genetic Algorithm (유전 알고리즘을 이용한 이동로봇의 주행 오차 보정)

  • 박병규;이기성
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 1997.10a
    • /
    • pp.283-286
    • /
    • 1997
  • 일반적으로 직진 경로를 주행하는 이동로봇의 오차 보정을 위해서는 PI 제어기의 계수 보정이 필요하다. 본 논문에서는 직진 경로를 주행하는 이동로봇의 양쪽 바퀴에서 얻어진 엔코더의 값으로 측정하고, 측정되어진 엔코더의 값을 이용하여 방향과 움직임의 오차를 보정해주는 알고리즘을 PI제어기와 유전알고리즘을 사용하여 최적의 파라미터를 구할 수 있는 방법을 제안하였다.

  • PDF

Heading Error Compensation and Navigation Control of Mobile Robot using a Magentic Sensor (지자기 센서를 이용한 이동로봇의 Heading 오차 보정과 주행제어)

  • 정지봉;신위재;이상식
    • Proceedings of the Korea Institute of Convergence Signal Processing
    • /
    • 2000.08a
    • /
    • pp.117-120
    • /
    • 2000
  • 본 논문은 이동로봇이 주행 중 발생하는 heading 오차를 지자기센서를 이용하여 보정하고 주행을 정확히 제어하는 것에 관한 것이다. 일반적으로 이동로봇의 주행제어는 여러 원인에 의한 부정확성을 내포하고 있다. 예를 들어 바퀴의 부정확한 기계적 정렬, 기어의 헐거워짐, 센서 신호의 잡음과 오차, 바퀴의 미끄러짐, 평탄하지 않는 표면에 의한 제도변동 등이다. 따라서, 이동명령어 수행 시 이동로봇의 heading이 의도된 대로 유지되는지를 측정하는 오차 검출이 필요하며 이를 위한 센서 본 논문에서는 지자기센서를 이용하여 오차를 보정하였다. 실험은 무선 원격 제어되는 이동로봇에 지자기 센서를 부착하여 자계의 영향이 비교적 적은 평탄한 옥외에서 수행하였고, 실험 결과를 통해 지자기 센서를 이용한 이동로봇의 heading 오차 보정과 주행제어효과를 보여주었다.

  • PDF

Simultaneous Mobile Robot Calibration using Iterative Linear Method (선형 반복법에 의한 이동로봇의 동시 보정)

  • Kim, Young-Yong;Jeong, Mun-Ho
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.10 no.7
    • /
    • pp.793-800
    • /
    • 2015
  • We presented a method to perform simultaneously both head-eye calibration and wheel calibration for a mobile robot that has a stereo camera mounted on the pan-tilt mechanism. Such a mobile robot system prevails recently. However, conventional methods are not applicable to this system because they assumed that camera systems were mounted on fixed structures. Building on conventional methods, we devised an iterative linear solution to solve the problem, and achieved satisfactory results in terms of accuracy in addition to efficiency due to simultaneous calibration. Furthermore, the calibration accuracy was improved by nonlinear optimization.

Moving Object Detection for Biped Walking Robot by Using Motion Compensation (움직임 보정을 이용한 이족로봇의 동체 추출)

  • Kang, Tae-Koo;Park, Gwi-Tae
    • Proceedings of the KIEE Conference
    • /
    • 2007.07a
    • /
    • pp.1740-1741
    • /
    • 2007
  • 본 논문은 이족 로봇에서의 효과적으로 동체를 탐지하는 방법에 대하여 논한다. 이족 로봇의 움직임은 모바일 로봇의 움직임과는 달리 종횡의 움직임이 동시에 나타나게 된다. 따라서 로봇의 비젼이 움직이는 상황에서 움직이는 물체를 탐지해야 한다. 따라서 본 논문에서는 로봇의 움직임을 분석하여 로봇의 움직임을 보정하여 보다 높은 성능의 동체 탐지 성능을 높였다. 제안된 방법을 실제의 로봇으로부터의 영상을 통하여 실험한 결과 우수한 탐지 성능을 얻을 수 있었다.

  • PDF

로봇을 이용한 진동납땜 시스템 개발

  • 박종오;남도현;윤갑영
    • Journal of the KSME
    • /
    • v.30 no.1
    • /
    • pp.22-28
    • /
    • 1990
  • 로봇을 이용한 납땜자동화 시스템은 현재 산업계에서의 수요가 크게 일고 있다. 기존납땜 로봇 시스템은 느린 납땜 속도와 제한된 납땜 공구 기능으로 인해 그 응용범위의 확산을 저해하고 있다. 여기서는 로봇에 맞는 자동납땜용 공구 시스템 (robotonomic tool system)이 개발되었다. 우선 그 특징으로서 진동납땜 공정을 개발하였으며 평균 25%의 생산속도 향상을 기하였다. 일 정범위에서의 위치 오차 보정기능을 가지고 있다. 위치 오차는 납땜점 오차와 가압력 오차를 초래하며 이는 납땜 품질의 신뢰도를 저하시킨다. 여기서 핀 오차 보정 및 납땜 가압력 최적화 공정을 추가한 유연성이 향상된 자동납땜 시스템을 개발하였다. 이는 정밀 자동납땜 로봇 시스 템으로 그 응용범위를 확장시켰다.

  • PDF

The Chaos Robot for Advanced Self Position Compensation (자기 위치 보정을 향상시킨 카오스 로봇)

  • Bae Young-Chul;Kim Chun-Suk;Koo Young-Duk
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2006.05a
    • /
    • pp.297-300
    • /
    • 2006
  • 카오스 로봇의 하드웨어 구현에서 로봇의 차제 또는 바퀴가 정확하기 자기 위치를 인식하고 지시한 방향과 거리만큼 이동하는 것이 가장 중요하다. 본 논문에서는 방위 측정용으로 사용한 마그네틱 자이로센서를 대체한 새로운 각속도 센서를 사용하여 자기 위치 보정 능력 을 향상시키고 정확한 방향을 움직일 수 있는 카오스 로봇을 설계하였다.

  • PDF

Development and Verication of a Robot Off-line Programming System for Die Polishing Process (금형 연마작업을 위한 로봇 오프라인 프로그래밍 시스템의 개발 및 적용)

  • Kang, Sungchul;Kim, Munsang;Lee, Kyo Il
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.14 no.1
    • /
    • pp.69-77
    • /
    • 1997
  • 본 논문은 금형의 마무리 연마 작업을 로봇을 이용하여 자동화하기 위한 오프라인 프로그래밍 시스템개발을 그 내용으로 하고있다. 3차원 자유곡면 형상을 갖는 금형을 연마하기 위한 로봇 작업 경로를 효율적으로 생성하기 위해서는 기존의 교시 방법이 아닌 CAD시스템과 연계된 시뮬레이션 방식의 자동 경로 생성 방법이 요구된다. 본 연구에서 개발된 금형 연마 작업을 위한 오프라인 프로그래밍 시스템은 연마 작업 시뮬레이션을 위한 기하학적 모델링 기능, 로봇의 작업 공간을 고려한 작업장 배치 기능, 연마 로봇의 효율적인 기구학 해, 3차원 그래픽 시뮬레이션, 3차원 물체간의 충돌 검사 기능 및 유기적인 관계형 데이타 베이스 기능 등으로 구성된다. 본 시스템의 시뮬레이션 결과를 로봇의 위치 보정 과정을 거쳐 로봇 작업 프로그램 으로 변환함으로써 최종적으로 실제 연마 작업이 가능한, 정확하고 안전한 로봇 프로그램을 생성하였다.

  • PDF

Milestone State Generation Methods for Failure Handling of Autonomous Robots (자율 로봇의 오류 보정을 위한 이정표 상태 생성 방법)

  • Han, Hyun-Goo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.6
    • /
    • pp.2760-2769
    • /
    • 2011
  • An intelligent autonomous robot generates a plan to achieve a goal. A plan is a sequence of robot actions that accomplish a given mission by being successfully executed. However, in the complex and dynamic real world, a robot may encounter unexpected situations and may not execute its planned actions any more. Therefore, an intelligent autonomous robot must prepare an efficient handling process to cope with these situations to successfully complete a given mission. Plan repair with milestone states is an efficient method to cope with the situation. It retains the advantages of other plan repair procedures. This paper proposes a regressive method of formulating milestone states and a method of assigning weighting values on conditions that compose a milestone state. The task to repair a plan may employ the weighting values as its job priority. The regressive method formulates less complex milestone states and leads to the conditions of a milestone state to take pertinent weighting values for an efficient handling procedure to repair a plan with milestone states.

Particle filter for Correction of GPS location data of a mobile robot (이동로봇의 GPS위치 정보 보정을 위한 파티클 필터 방법)

  • Noh, Sung-Woo;Kim, Tae-Gyun;Ko, Nak-Yong;Bae, Young-Chul
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.7 no.2
    • /
    • pp.381-389
    • /
    • 2012
  • This paper proposes a method which corrects location data of GPS for navigation of outdoor mobile robot. The method uses a Bayesian filter approach called the particle filter(PF). The method iterates two procedures: prediction and correction. The prediction procedure calculates robot location based on translational and rotational velocity data given by the robot command. It incorporates uncertainty into the predicted robot location by adding uncertainty to translational and rotational velocity command. Using the sensor characteristics of the GPS, the belief that a particle assumes true location of the robot is calculated. The resampling from the particles based on the belief constitutes the correction procedure. Since usual GPS data includes abrupt and random noise, the robot motion command based on the GPS data suffers from sudden and unexpected change, resulting in jerky robot motion. The PF reduces corruption on the GPS data and prevents unexpected location error. The proposed method is used for navigation of a mobile robot in the 2011 Robot Outdoor Navigation Competition, which was held at Gwangju on the 16-th August 2011. The method restricted the robot location error below 0.5m along the navigation of 300m length.

Low-Power Walking Compensation Method for Biped Robot Based on Consumption Energy Analysis (소비 에너지 분석을 통한 이족로봇의 저전력 보행 보정 기법)

  • Lee, Chang-Seok;Na, Doo-Young;Kim, Yong-Tae
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.20 no.6
    • /
    • pp.793-798
    • /
    • 2010
  • In this paper we propose a low-power walking compensation method for biped robot based on consumption energy analysis. Firstly, basic walking motions that can reduce energy consumption of robot movements are implemented based on consumption energy analysis according to robot axes. We define knee bent motion as a basic walking motion. It can improve energy consumption and motion stability by lowering center of gravity of the biped robot. We analyze consumption energy of left and right leg of the robot using motor currents and propose a compensation method of walking motions to reduce unbalance of consumption energy between left leg and right leg. It can also improve energy consumption and walking stability of the robot. The proposed low-power compensation method based on consumption energy analysis is verified by walking experiments of a small biped robot with an embedded system.