• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2022

This study presents the bogie arrangement of the load-out system for on-ground shipbuilding. The load-out system is one of the most important systems to perform the bogie arrangement of the on-ground shipbuilding technique without dry dock facilities, and this system is composed of four pieces of equipment: bogies, driving bogie with motors, trestles, and power packs. Also, the bogie arrangement analysis (BAA) is employed to simply calculate the reaction forces at the trestle for structural safety. In this context, the purpose of this study is to propose an optimal design method to perform the bogie arrangement satisfying structural safety requirements with minimal cost. It is expected that the proposed methodology will contribute to the effective practice as well as to the improvement of competitive capability for shipbuilding companies at the on-ground shipbuilding stage. Furthermore, we describe some problems and their solutions of the deformation that may occur in the bottom of the hull during the load-out process. As a result, it is shown that we applied it to the 114K crude oil tanker (Minimum bogie 54EA) and the 174K CBM LNG carrier (Minimum bogie 88EA), it can minimize the number of bogie and critical risks (Safety rate 1.61) during the load-out of on-ground shipbuilding. Through this study, the reader will be able to learn successful load-out operation and economic shipbuilding in the future.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.2
• /
• pp.59-66
• /
• 2013

In this paper, we proposed an optimal ILP algorithm on memory address code generation for DSP in embedded system. This paper using 0-1 ILP formulations DSP address generation units should minimize the memory variable data layout. We identify the possibility of the memory assignment of variable based on the constraints condition, and register the address code which a variable instructs in the program pointer. If the process sequence of the program is declared to the program pointer, then we apply the auto-in/decrement mode about the address code of the relevant variable. And we minimize the loads on the address registers to optimize the data layout of the variable. In this paper, in order to prove the effectiveness of the proposed algorithm, FICO Xpress-MP Modeling Tools were applied to the benchmark. The result that we apply a benchmark, an optimal memory layout of the proposed algorithm then the general declarative order memory on the address/modify register to reduce the number of loads, and reduced access to the address code. Therefor, we proved to reduce the execution time of programs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05c
• /
• pp.1765-1768
• /
• 2003

웹 프로젝트는 다양한 언어와 기술들이 결합되어 매우 복잡하고, 개발 및 유지보수의 생산성이 낮은 분야이다. 특히, 화면의 디자인과 프로그램 코드가 혼재되어 있다는 것이 공동개발과 이해를 가장 어렵게 한다. 웹 기반 시스템을 개발하기 위해서는 사용자 인터페이스 디자이너가 먼저 화면 레이아웃을 설계한 후 그 화면의 레이아웃 소스를 가지고 다시 프로그램 로드 개발자가 코딩을 하여 프로젝트를 완성한다. 유지 보수를 하는 경우에도 이와 비슷한 형태로 작업이 진행된다. 이러한 웹 기반의 소프트웨어 개발 방법은 JSP의 태그 라이브러리와 같은 다양한 형태로 제안되었으나 실제로 적용하는데 여러 가지 문제점이 있으며, 기존치 C/S 기반의 소프트웨어 개발에 비해 생산성 측면에서도 매우 좋지 않다. 본 논문에서는 웹 환경에서 운영되는 정보 시스템의 개발 과정에서 발생하는 디자인(사용자 인터페이스)과 프로그램을 분리하기 위한 방법론들의 문제점들을 제시하고 효율적인 분리 방법론이 갖추어야할 조건들을 제시하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1417-1422
• /
• 1991

In this paper we develop an analytic model for end-to-end communication protocols and study the window mechanism for flow control in store-and-forward computer networks. We develop a flow control model in which the parameters of the system are not dynamically adjusted to the stochastic fluctuation of the system load. Simulation results are presented and it is shown that the throughput-delay performance of a network can be improved by proper selection of the design parameter, such as timeout, the number of retransmission, etc.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.