• Transactions of Materials Processing
• /
• v.27 no.4
• /
• pp.244-249
• /
• 2018

Rhodium is a representative platinum group material. Rhodium is used in several industrial fields including jewelry, chemical reaction catalyst, electric component etc. In recently, ultra-fine rhodium wire has been applied to the pins of probe card used to test a semiconductor. In this study, in order to produce a fine rhodium wire with the diameter of $50{\mu}m$, a fine rhodium wire drawing process was designed. After design of the fine wire drawing process by using a uniform reduction ratio theory, finite element analysis was performed. Finally, fine wire drawing experiment was performed to verify the effectiveness of the designed process.

• Resources Recycling
• /
• v.18 no.4
• /
• pp.3-13
• /
• 2009

Rare platinum group (RPG)including rhodium, ruthenium, iridium, osmium, exists at the rate of 0.4 ppb or less in the earth's crust. For the purpose of suggestion to developing necessity for recycling technology with the RPG, survey on the characteristics and the recovery technologies was carried out by using patent information.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.275-280
• /
• 2019

The aim of this study is to fabricate an ultra-fine pure rhodium wire using multi-pass wire drawing process. To manufacture $30{\mu}m$ ultra-fine rhodium wire from the initial $50{\mu}m$ wire, a multi-pass wire drawing process was designed based on the uniform reduction ratio theory. The elastic-plastic finite element analysis was then conducted to validate the efficacy of the designed process. The drawing load, drawing stress, and the distribution of the effective strain were evaluated using the finite element analysis. Finally, the wire drawing experiment was performed to validate the designed wire drawing process. From the results of the experiment, the diameter of the final drawn wire was found to be $29.85{\mu}m$.

• Resources Recycling
• /
• v.28 no.2
• /
• pp.46-53
• /
• 2019

In this study, the extraction and reduction behavior of platinum group metals in a non-aqueous solvent based on ionic liquids was investigated in order to confirm a new extraction technology of platinum group metals. Platinum was selectively extracted using an ionic liquid $[C_4mim]PF_6$ from a mixed solution of $PdCl_2$, $PtCl_4$ and $RhCl_3$ dissolved with concentration ratio of 10:1:0.5 M. After stripping of the metals by 1 M $HNO_3$ solution, the platinum was preferentially reduced by aqueous electrolysis on gold electrode at -0.8 V (vs. Pt-QRE). The residual palladium and rhodium were transferred to ionic liquid of $[C_4mim]Cl$. The metallic palladium and rhodium could be sequentially reduced on gold and STS304 as working electrodes by non-aqueous electrolysis, respectively.

• Journal of the Korean Chemical Society
• /
• v.40 no.11
• /
• pp.692-698
• /
• 1996

A synthesis of the oxazole skeleton of discokiolide B, represented by discokiic acid 1, is described. Aldol condensation of 2[2'-(4-phenyl-3-butenyl)]-1,3-oxazole 4-carboxaldehyde(4a) with lithium enolate of methyl propionate provided the discokiic acid methyl ester. The key intermediate 2[2'-(4-phenyl-3-butenyl)]-1,3-oxazole-4-carboxaldehyde (4a) has been synthesized from the rhodium-catalyzed cycloaddition of diazomalonaldehyde with nitrile. The relative stereochemistry of the 3-hydroxy-2-methylpropanoate unit of discokiic acid was assigned on the basis of $^1H$ and $^{13}C$ NMR data.

• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.264-270
• /
• 2016

Self-powered neutron detector (SPND) is a sensor to monitor a neutron flux proportional to a reactor power of the nuclear power plants. Since an SPND is usually installed in the reactor core and does not require additional outside power, it generates electrons itself from interaction between neutrons and a neutron-sensitive material called an emitter, such as rhodium and vanadium. This paper presents the simulations of the depletion sensitivity evaluations based on MCNP models of rhodium and vanadium SPNDs and light water reactor fuel assembly. The evaluations include the detail geometries of the detectors and fuel assembly, and the modeling of rhodium and vanadium emitter depletion using MCNP and ORIGEN-S codes, and the realistic energy spectrum of beta rays using BETA-S code. The results of the simulations show that the lifetime of an SPND can be prolonged by using vanadium SPND than rhodium SPND. Also, the methods presented here can be used to analyze a life-time of those SPNDs using various emitter materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.51-59
• /
• 2005

수소 분리막의 적용 분야는 석탄가스, 천연가스, 메탄가스 혼합기체이며, 고온/고압 및 수소농도가 낮은 혼합기체에서 고순도의 수소를 제조하는 곳이다. 특히 치밀질 세라믹 멤브레인은 고온에서 가스화한 석탄가스나 차세대의 쓰레기 처리 기술인 가스화 용융처리에서 생긴 고온가스로부터 고순도의 수소를 분리할 수 있다. 분리한 수소는 고온을 유지하기 때문에 연료전지 발전에 최적이다. 종래의 연료전지는 발전을 위해서 수소의 가열이 필요했으나 이것이 불필요하게 되어 발전 전체의 효율이 향상된다. 석유화학 산업에서 발생하는 혼합기체에서 수소를 분리하여 사용하고 남은 기체는 연료로 재사용할 수 있다. 분리막의 재질로는 고분자계가 개발되고 있으며 고분자 지지체에 백금이나 로듐과 같은 촉매를 코팅하는 방법이다. 이는 기공의 제어가 용이하고 대량생산이 가능한 장점이 있지만 고온에서 사용이 불가능하고 입자상 물질에 의해 분리막의 손상이 문제가 되고 있다. 이에 비해 치밀질 세라믹 멤브레인은 세라믹의 특성에 의해 고온 및 고압에서도 적용이 가능하며, 실온이나 저압의 조건에서도 적용이 가능한 특징을 가진다. $900^{\circ}C$의 고온에서 적용시 세라믹 멤브레인에는 특성열화가 없어 수명이 긴 장점을 가지게 된다. 수소가 포함되어 있는 기체에서 수소 만을 분리하는 방법은 흡착이나 분리막을 이용하는 방법이 일반적이며 흡착에 의한 방법은 일부 실용화가 진행되고 있다. 고효율의 수소를 분리하는 방법으로 분리막을 이용하는 방법이 있다. 현재 치밀질 수소 분리막의 연구는 외국(미국, 일본 등)에서도 초기 연구 단계이다. 국내에서도 이런 연구가 선행되어 외국과의 기술 격차를 줄이고 에너지 자원에 대한 확보가 필요하기 때문에 이 연구가 수행되었다. 치밀질 멤브레인의 소재로는 proton 및 전자전도가 가능한 소재로서 Ba-Ce-Y계를 기본조성으로 하여 내구성과 전기전도도를 향상시키기 위해 Ca, La, In, Yb를 치환하였다. 제조한 재료의 물리화학적 특성을 평가하였고, 수소여과 장치를 이용하여 여과 효율을 평가하였다.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.2
• /
• pp.81-88
• /
• 2012

Probe tip, which should have not only superior electrical characteristics but also good abrasion resistance for numerous contacts with semiconductor pads to confirm their availability, is essential for MEMS probe card. To obtain good durability of probe tip, it needs thick and crack-free rhodium layer on the tip. However, when the rhodium thickness deposited by electroplating increased, unwanted cracks by high internal stress led to serious problem of MEMS probe tip. This article reported the method of thick Rh deposition with Au buffer layer on the probe tip to overcome the problem of high internal stress and studied mechanical and electrical properties of that. MEMS probe tip with double-Rh layer had good contact resistance and durability during long term touch downs.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.430-435
• /
• 2010

Solvent extraction experiments of Rh(III) and Ir(IV) were performed on the HCl solution by using Alamine336 and TBP. The extraction percentage of Rh and Ir by Alamine336 was much higher than that by TBP. For the solvent extraction with Alamine336, the extraction percentage of Rh and Ir decreased with a HCl concentration. However, the extraction percentage of both metals by TBP was below 12% in our experimental range and increased with an increasing HCl concentration of up to 8 M. From the mixed solution of Ir with an excess SnCl$_{2}$, most of the tin was extracted by Alamine336 and TBP. However, the extraction percentage of Ir by Alamine336 was reduced and no iridium was extracted by TBP. The extraction behavior of Ir and Sn was investigated by scrubbing experiments on the loaded Ir with a SnCl$_{2}$ solution.

• Composites Research
• /
• v.19 no.6
• /
• pp.32-37
• /
• 2006

This paper summarizes the processing inorganic continuous fibers from Korean minerals. Continuous filament fibers have been produced from two rocks, basalt and quartz diorite porphyry(QDP), by melting method. The essence of the method is that the vitrified materials was placed into the bushing, platinum/rhodium alloy crucible with a nozzle, and heated electrically to a temperature which allowed fiber spinning. Vitrified basalt without additive was suitable for producing continuous filament fiber. However doping quartz diorite porphyry with boric oxide yielded a material which could be pulled continuously.