• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.118-119
• /
• 2013

마리나 시설 내 계류된 선박 및 레저장비를 악천 후 해상상태와 선박 운항에 의해 발생된 파로부터 장비 및 인명의 안전을 위한 파 제거 장치가 필요하다. 본 연구에서는 국내 각 지자체의 수요에 부응하고 시설 및 인명의 안전을 위한 소파 시스템개발을 목적으로 시제품 제작(설계, 해석, 수조시험 등 수행완료)하였다. 실해상 성능시험에서 항주파의 발생을 위해 시험선박 선정하였으며, 소파장치 전후의 파고계측 등을 위해 부가물을 계측하여 파고를 촬영 및 계측하였다. 개발된 소파장치의 실해상 시험임을 감안해 해상 주위의 조류, 풍속, 인근 해역에서 오는 파랑변형 등에 따른 파랑요소를 고려하여 시험하였다. 부소파제는 약 40~80% 의 에너지 감소율을 보였으며, 유의파고 조건에서 42%의 에너지 감소율을 보였다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.60-63
• /
• 2003

Resistance performance of 3 G/T class coastal leisure boat is experimentally investigated at high speed ranges and the effect of a fin attached at hull side is studied together. Wave patterns are observed to make clear the relation between the resistance performances and the wave characteristics.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.80-84
• /
• 2004

The initial hull form of a 3 G/T and 30 knots class coastal leisure boat is newly developed. The performances measured, resistance, trim and sinkage, are investigated in a high-speed, circulating water channel (CWC). The effect of a fin attached on the hull side is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the fin plays a role of increasing the resistance performance above a certain velocity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.203-205
• /
• 2011

부경제적 여유와 함께 사람들의 요구가 다양화 되면서 해양 레저에 대한 관심이 증가하고 있다. 삼면이 바다인 우리나라는 바다를 이용한 해양 레저의 잠재력이 매우 높기 때문에 해양 리조트 개발이 증가할 것으로 예상된다. 그러나 이미 포화상태에 이르렀으며 또한 환경문제를 내포하고 있는 매립에 의한 개발은 상당한 어려움이 따를 것으로 예상된다. 이에 대한 대안으로 플로팅 건축에 의한 개발이 확대될 것으로 기대되지만 플로팅에 의한 해상호텔에 대한 연구는 아직 초보적인 단계에 있으며 이용객의 쾌적성에 직접적인 영향을 미치는 공조 설비 용량을 선정하기 위한 부하계산에 대한 연구는 전무하다고 할 수 있다. 본 연구에서는 육상의 일반적인 호텔과 선박의 공조부하 계산법을 비교 분석함으로써 해상호텔의 공조부하계산방법에 대해 검토한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.93-95
• /
• 2020

주 5일제 근무, 개인 여가문화 확산, 국민 소득 증대 등으로 인해 해양을 레저의 목적으로 이용하는 사람들이 증가하고 있으며, 이러한 이용객의 증가에 따라 사고 발생의 개연성도 함께 증가하고 있는 상황이다. 우리나라에서는 선박을 이용한 레저활동의 경우에는 안정장비의 착용을 의무화하고 있지만, 연안 해역에서의 해양활동에 대하여는 안전장비 착용 의무화가 시행되지 않고 있다. 따라서, 본 연구에서는 연안 이용객에 의한 사고통계 데이터 분석을 바탕으로 연안 이용객의 안전장비 착용의 필요성에 대하여 고찰하였다. 또한, 분석된 내용을 바탕으로 안정장비 착용 의무화 방안에 대하여 제안하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.261-262
• /
• 2012

In this research, intelligent protection system for laser boat is introduced. The function of system is to measure the distance and velocity of object from our boat and generate control signals to avoid collision with moving targets. A novel approach to estimate object's position from our ship is tackled on this paper. To do this laser sensors are used to measure distance from ship to targets. The ship position and velocity is estimated by th Kalman filter algorithm. In the real phase, the filtering method will be applied to process signal gathered by laser sensors. Simulation to estimate ship's position and velocity under noise are executed and the results are introduced to show the effectiveness of the algorithm.

• Composites Research
• /
• v.34 no.6
• /
• pp.350-356
• /
• 2021

When a ship with a planing line operates or turns in a straight line, the floating position and trim change according to the speed, and a large resistance is generated on the hull. In this paper, the resistance to a planing line was estimated through the computational fluid dynamics of a leisure boat with improved hull weight and durability by applying a carbon composite material to the hull. The resistance performance of the bow and stern of the 18ft class leisure boat was checked and the flow field of the entire vessel was estimated, and the stability of the planing line was confirmed by comparing the resistance of each trim through numerical analysis. In addition, it was confirmed that the designed planing line could withstand it sufficiently because the force applied to the hull was not large, and The stability of the boat was analyzed by calculating the wavelength of the wave and the length of the ship as the ratio of gravity to the inertial force and checking how much force the rolling occurred.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.119-123
• /
• 2016

In the coastal area, many kind of vessels are operating and exposed to the various marine accidents. In particular, small-size vessels, which are not equipped with the safety equipment, are in the defenceless state to the marine accidents such as the accident according to vessel's own state caused by the diverse reasons and the collision with the neighborhood vessels and objectives. So it is necessary to resolve these situations through the inexpensive equipment. This paper implements the function that can detect vessel's own motion using Smart Phone. if the motion is over the threshold value assigned, this function decides that the current situation is dangerous for this vessel. So this function informs Smart Phone's ower in the vessel and the control center of this situation. This function can be applied to small-size vessels, such as fishing boating, passenger ship, and leasure boat, which have few the safety equipments, and then improve vessel's safety navigation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.407-416
• /
• 2023

Demand for leisure facilities such as mooring facilities for berthing leisure vessels and floating pensions based on floating bodies is increasing owing to the rapid growth of the population and related industries for marine leisure activities. Owing to its relatively light weight as a fluid, inclination is easily generated by waves and surcharges flowing to the coast, resulting in frequent safety accidents because of the low stability. As a solution to this problem, a motion reduction device for floating bodies is proposed in this study. The device (motion reduction device based on the air pressure dif erence) was attached to a floating body and the effect was analyzed by comparing the results with those of a floating body without motion reduction. The effect analysis was further analyzed using a computer analysis test, and the method for increasing the stability of the floating body was studied, and its the effect was verified. Based on the analysis of the test results, the stability of the floating body increased with a motion damping device is higher than that of the floating body without a motion reducing device as the wave momentum reduces, owing to the air pressure difference. Therefore it was concluded that the use of such a device for reducing motion a floating body is useful not only for non-powered ships but also for powered and semi-submersible ships, and further research should be conducted by applying it to various fields.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.99-104
• /
• 2015

Life rafts, which has been used for domestic vessel currently, are fabricated mostly for the ocean-going vessels in accordance with the SOLAS Resolution. Therefore, there is not any small-sized life raft which can be installed on small fishery boat, leisure boat and cargo vessel with those length shorter than 20 meters in our country. However, in many foreign countries, new standards or the small-sized life rafts applicable to those small vessel have been developed according to the standard of ISO 9650. Furthermore, they make their effort to contribute the safety for the life at sea by supply the superior product of life rafts, which have been adopted by light material (i.e. thermoplastic polyurethane, TPU) and economic production process (i.e. heat sealing, radio-frequency welding, RFW), etc. In this paper, the development results of the small-sized life raft, which has been used the lightening material TPU and fabricated by RF-welding method, will be introduced.