• 제목/요약/키워드: 레저보트

검색결과 83건 처리시간 0.023초

레저용 플로팅건축물 설계를 위한 국내 마리나클럽 현황 및 공간구성에 대한 연구

  • 박성신
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2011년도 추계학술대회
    • /
    • pp.108-110
    • /
    • 2011
  • 국내 해양레포츠 수요는 지속적인 증가세이며, 한국해양수산개발원은 2015년 국내 요트수요 22,000척에 달할 것으로 전망하고 있다. 이에 따른 마리나 및 마리나클럽 공간의 확충도 필요하다. 현재 국내 마리나는 수적으로 한정된 상태로 서울마리나, 아라마리나, 전곡마리나, 수영마리나 등이 대표적인 시설이다. 마리나 공간은 계류시설, 클럽하우스, 보트이동시설, 수리소 및 보관창고, 세척공간 및 각종 지원시설, 복합시설로 구성되며, 마리나클럽은 그 중심 공간이다. 국내 마리나클럽은 식음을 위한 상업공간의 면적이 큰 비율을 차지하고 있다. 전반적으로 마리나는 육지에서 강이나 바다로의 조망, 수면에서 랜드마크 효과 극대화하는 공간 디자인을 추구한다.

  • PDF

팽창식 튜브를 부착한 6m급 스포츠 보트 개발에 관한 연구 (The study on the development of 6m class sports RIB)

  • 김형민;서성부
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제31권5호
    • /
    • pp.606-613
    • /
    • 2007
  • The 6m class high speed boat is developed with a durable hull and inflatable tube, which is called RIB(Rigid Inflatable Boat), for the purpose of marine leisure. In the stage of the conceptual design, its requirements to be optimized are determined based on the presented information of similar marine leisure RIBs. The 3-D graphical technique using Marine Rhino is utilized to optimize the compartment layout of RIB. The stability analysis is performed for the light and full load conditions with and without the inflatable tube. In addition, the sea keeping and hydrodynamic performance was tested using the proto-type ship in the sea condition. From the results of the computation and the sea trial test, it shows that the performance of the marine leisure RIB satisfies the speed, the convenience, and the stability requirements. This study provides the typical information of the design factors and the procedure to manufacture the marine leisure RIB.

18.5ft급 경기용 배스보트의 주요제원 선정에 관한 수치해석 연구 (A Numerical Study on the Selection of Main Specification of the 18.5ft Bass Fishing Boat)

  • 임준택;서광철;박근홍;김상원
    • 해양환경안전학회지
    • /
    • 제24권7호
    • /
    • pp.945-952
    • /
    • 2018
  • 최근 국내에서 배스낚시는 하나의 해양레저 스포츠로서 자리매김하고 있다. 국내 배스 낚시협회는 총 4곳이 있으며 각 협회당 매년 10~15회의 토너먼트 대회를 개최하는 등 수요가 높은 편이다. 그러나 국내 대회에서 선호되는 17ft 이상 급의 배스보트의 경우 현재 100 % 수입에 의존하고 있는 실정이다. 본 연구에서는 해외실적선 자료를 바탕으로 통계분석을 통해 18.5ft급 경기용 배스보트의 초기선형 개발을 위한 주요제원을 도출하였다. 또한 활주선의 저항 및 활주성능에 큰 영향을 미치는 선저경사각 및 종방향 무게중심에 따른 CFD 수치해석을 수행하였다. 수치해석의 경우, 설계 속도인 $Fn=3.284 (Re=9.858{\times}10^7)$에 대해서 수행하였고, 선저 경사각은 $12{\sim}20^{\circ}$, 종방향 무게중심은 부력중심으로부터 선미방향으로 $0{\sim}8%L_{WL}$의 범위로 설정하였다. 수치해석 결과를 바탕으로, 1차적으로 저항성능과 침수용골 길이를 바탕으로 범위를 설정한 후, Savitsky의 Drag-Lift ratio의 상관그래프를 이용하여 최적 트림각에 근접한 선저경사각($14{\sim}16^{\circ}$), 종방향 무게중심위치($4{\sim}6%L_{WL}$)의 범위를 도출하였다.

카타마란형 파워요트의 운동응답 특성에 관한 연구 (Characteristics on the Motion Response of a Catamaran Power Yacht)

  • 김옥석;오우준;손창배;이경우
    • 한국항해항만학회지
    • /
    • 제34권6호
    • /
    • pp.447-452
    • /
    • 2010
  • 내항성능이 우수한 선체는 나쁜 해상상태에서도 효과적으로 운항이 가능하고, 여객과 화물을 안정된 상태로 유지시키게 된다. 이러한 선체의 운동은 선속과 파도의 조우주파수와 밀접한 관계를 가지고 있다. 운동응답에 대한 평가는 입사파에 대하여 3자유도 운동에 대한 계산이 수행되어야 한다. 따라서 본 연구에서는 카타마란형 레저보트의 선형설계를 수행하여 이에 대한 운동성능을 고찰하고자 하였다. 조우각과 선속의 변화에 따른 카타마란의 3자유도에 대한 RAO 및 RMS 값의 반복적인 평가를 통하여 양호한 운동응답을 보였다.

40ft 급 크루즈 레저보트의 운동성능 해석 및 모형시험 비교 연구 (Comparative Study on the Motion Responses for a 40ft Class Cruise Leisure Boat)

  • 김동진;이기표;염덕준;장양
    • 대한조선학회논문집
    • /
    • 제50권4호
    • /
    • pp.240-247
    • /
    • 2013
  • Hydrodynamic characteristics of a planing craft are very sensitive to the hull form variations, especially when the craft navigates with high-speed. Therefore, we need to verify hydrodynamic performances of the craft during the process of hull form design. In this paper, motion performances of a 40ft class cruise leisure boat are evaluated by both model tests and theoretical analyses using two different methods. Model tests are carried out at calm sea and regular wave conditions using high speed towing carriage installed in SNU towing tank. Theoretical methods used are a empirical method proposed by Martin (1976) and a potential method based on Rankine panel (DNV, 2010). The results from the theoretical methods are compared with and verified by those of model tests. Results of empirical formula showed somewhat larger motion RAOs and resonant frequencies than those of model tests. Potential based method showed even larger discrepancies with the model test results. From the analyses of comparison results, we could confirm the limitation of each theoretical method and suggest the way of improvement for the better prediction of motion performances.

레저보트 생산공정정보 기반의 공장 레이아웃 설계 시스템 개발 (Development of a Factory Layout Design System using Leisure-Boat Building Process)

  • 이동건;정용국;신종계
    • 대한조선학회논문집
    • /
    • 제50권1호
    • /
    • pp.14-24
    • /
    • 2013
  • The marine leisure industry in Korea has been the focus of the power of economic growth and the creation of jobs in recent years. In this regard, many studies concerning marine leisure are on-going in various fields. In this paper, developed a layout system and algorithm can resolve the factory and facility layout problem. For a layout design of leisure-boat factories, the leisure-boat production process is analyzed in order to derive standard production space elements for the layout of the factory. Based on the results, a draft design of the factory layout is carried out based on the manpower planning data, as well as the characteristics and relationships of each process data. A layout design of this paper can be verified through a factory simulation solution and we suggest the verification method using a SBD(simulation based design) methodology. The layout system takes into account the user's accessibility and extendibility, so it is web-oriented and uses RIA (rich Internet Application) technology. Furthermore, the system and layout algorithm of this paper are verified with samples data that show the efficient factory arrangement and practical application method.

적층식 평판 키트형 카누 건조 기술 개발에 관한 연구 [1] - 카누 선체의 설계 및 적층식 평판 키트 분할 기법 - (A Study on the Development of Ship Building for the Wooden Canoe by Piling-up Laminated Wooden Plates Kit [1] - A Design for canoe hull and laminating wooden plates for piling-up kit -)

  • 김희중;김성현;정재현
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권5호
    • /
    • pp.762-769
    • /
    • 2009
  • A canoe is one of the most popular boats in leisure on the water. Generally canoe has been built by good wooden strips. And canoe built by FRP is used for business recently. But by the users' demands for good quality and the restriction to environmental pollution the wooden canoes are required for personal and canoe building business. The modern wooden canoes were built by the strip construction method are used typically. However it is not suitable for the mass productivity requires effective resource operations and managements of men, materials, times, and price. On this paper the new construction method, called the piling-up laminated construction method, is studied to building a canoe using the piling-up with the laminated wooden plates gives more productivity than the others. First a canoe with various curved surfaces is designed from 3D design system. And the hull of canoe model is divided horizontally to generating the laminated plates that will be converting real wooden plates available from the market and will be routed by the manufacturing machine. After the simulating and analyzing of piling-up with the laminated plates, the canoe is building with less times, less men, less resources, and lower price than other method, avoid of the requirements of additional building tools. On the next paper the constructing of a real canoe using the manufactured wooden plates will be studied.

IT융합 기술을 활용한 스마트 페데스털 시스템의 개발 (Development of Smart Pedestal System using IT Convergence Technology)

  • 유남현
    • 한국전자통신학회논문지
    • /
    • 제7권5호
    • /
    • pp.1245-1251
    • /
    • 2012
  • 최근 해양 레포츠 활동에 대한 사람들의 참여가 증가하면서 마리나에 대한 수요가 폭증하고 있다. 이와 같은 수요를 충당하기 위하여 국토해양부에서는 2019년까지 총 1조 7000억원을 투입하여 전국 43개소에 5,600여척을 계류할 수 있는 마리나 시설을 건립할 계획이다. 마리나 시설에 가장 필요한 시설이 바로 레저 보트에 전기와 물을 공급할 수 있는 페데스털 시스템이다. 현재, 우리나라에 설치되는 페데스털 시스템은 전부 해외에서 수입하고 있다. 이에 본 논문에서는 국내 최초로 IT 융합 기술을 이용하여 스마트 페데스털 시스템을 개발하였다.

반 잠수형 쌍동선에 설치된 수중관람용 관람창 설계 및 구조 안전성 평가 (Structural Safety Assessments for Viewing Window of Semi-Submersible Catamaran)

  • 황세윤;김호성;이경훈;김유일;이장현
    • 대한조선학회논문집
    • /
    • 제51권4호
    • /
    • pp.291-299
    • /
    • 2014
  • In the design process of ship or its comprising components, the key to the successful design is how to guarantee the structural safety satisfying the international standard and regulation, which sometimes is not clear enough to cover the detail designs. This study deals with the design procedure for submersible viewing window installed in catamaran. As the window material, the Plexiglass, a type of reinforced plastic, is considered to satisfy the design requirements of international standard. Window thickness is calculated using geometric nonlinear finite element analysis, in order to take into account possible large deformation due to low stiffness of the Plexiglass, and the results are compared with those determined by the procedure specified in ISO12216. Finally, for the validation of proposed design, the pressure test had been carried out following the procedure specified in the standard, and structural safety was checked.

친수공간 이용효율성 개선을 위한 중요도·만족도 분석 - 국내·외 드래곤 보트 페스티벌을 위한 친수공간 사례로 - (An Importance and Satisfaction Analysis for Improvement Efficiency Use of Waterfront - A Focus on the Waterfront Analysis for Domestic and Foreign Dragon Boat Festival -)

  • 안병철
    • 한국조경학회지
    • /
    • 제44권4호
    • /
    • pp.86-99
    • /
    • 2016
  • 본 연구에서는 친수공간을 적극적으로 활용하는 수상레포츠인 드래곤 보트 페스티벌을 통해 친수공간의 외적 환경과 내적 공간구조의 분석하고, 이용효율성을 증진시키는 방안을 고찰해 보고자 하였다. 홍콩, 부산, 인천, 대전 등 국내외 4곳의 대상지를 통해 친수공간의 이용효율성에 영향을 미치는 요소에 대한 이용자들의 중요도와 만족도를 분석하고, 이에 따른 기초데이터를 제공하여 친수공간의 문화컨텐츠 활성화에 도움이 되고자 하였으며, 그 결과는 다음과 같다. 첫째, 12항목에 대한 중요도 분석에서 친수공간 주변의 현대적 관광자원이 가장 높게 나타났으며, 수변경관, 수변광장 및 오픈스페이스, 편의시설, 교통접근성, 수변녹지, 전망공간, 역사적 관광자원, 보행접근성, 수면의 폭, 수질, 수심, 파랑 등의 수면조건, 계류시설 순으로 분석되었다. 둘째, 수변경관성은 대상지의 공간 구조적 문제라기보다는 도시 규모에 따른 외적 환경 요인에 의한 것으로 해석되며, 친수공간 입지선정에 영향을 미칠 수 있는 중요한 요인으로 해석된다. 수변 녹지경관의 분석에서 국내 대상지의 만족도가 높은 것은 최근 천변공원 등이 친수적 행위를 고려하여 조성된 원인에 있다고 볼 수 있다. 전망공간은 수변 쾌적성 체험과 드래곤보트를 비롯한 수상레포츠의 역동성을 입체감 있게 볼 수 있는 주요 인프라로서, 이용효율성을 위해 개선되어야 할 부분이라고 판단된다. 셋째, 관광자원적 요소는 친수공간 이용효율성에 영향을 미치는 중요도가 높은 인자로서, 역사적 자원보다는 현대적 관광자원에 더욱 민감히 반응하는 것으로 나타났는데, 이는 젊은 계층들의 쇼핑, 레저 등을 위한 관광인프라가 영향을 미친다고 분석되며, 홍콩과 부산은 주변 관광자원 인프라가 인접해 있는 친수공간 이용에 유리하게 작용한다는 것을 보여준다고 할 수 있다. 넷째, 교통 접근성 분석에서, 홍콩과 부산 두 곳 모두 지하철에 의한 교통 접근성이 우수한 지역의 영향으로 높게 평가되었으며, 대전은 교통 인프라에 비해 상대적으로 낮은 장소적 인지도의 영향 탓으로 만족도가 낮게 분석되었다. 홍콩의 보행접근성은 친수공간이 도심으로 연결되어 있고, 부산은 주거단지와 쇼핑센터 등의 이용객들이 도보로 접근할 수 있는 위치에 의한 결과로 분석된다. 마지막으로, 수면의 폭의 중요도 만족도 분석에서, 인천을 제외하고는 3곳 모두 수면의 폭이 200m 이상이며, 일정수준 이상의 수면 폭이 수상레포츠를 즐길 수 있는 집중력을 저해하는 결과로서 해석될 수 있다. 수질, 수심, 파랑 등의 수면 조건의 분석에서, 부산은 설문조사시 수질에 대한 문제가 제기되었으며, 대전 갑천의 경우는 대회 참여자들에 의해 적정수심에 대한 문제점이 제기되었다.