• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제2권)
• /
• pp.143-147
• /
• 2006

컨테이너의 양 ${\cdot}$ 하역 작업 시 크레인을 정 위치에 고정시키고, 돌풍으로 인해 크레인이 레일방향으로 미끄러지는 것을 방지하는 장치가 레일클램프이다. 쐐기형 레일클램프는 풍속이 증가하면 쐐기작용에 의해 압착력이 증가하므로 구조적으로 안정성과 내구성이 있게 설계해야한다. 따라서 본 연구에서는 순차적 표본방법을 기반으로 하는 크리깅 모델을 이용하여 조 형상최적설계를 수행하였다. 크리깅은 표본점의 반응치를 기초로 내삽법에 의해 임의의 점에서의 반응치를 예측하는 근사기법의 하나이다. 이것은 최적설계 분야에서 자주 사용되는 근사기법인 반응표면법에 비해 반응치의 보다 정확한 예측이 가능하며 특히 비선형성이 강한 함수의 예측에 적합하다고 알려져 있다. 순차적 크리깅 모델에 의하여 구해진 최적해를 상용프로그램을 이용하여 구한 최적해와 비교하고 제안된 방법의 유용성을 검토하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.355-360
• /
• 2006

컨테이너 크레인용 쐐기형 레일클램프에서 조 패드의 초기 압착력은 라커의 물림각 설정 후 라커를 체결 시 주요 부품의 변형량에 의해서 결정된다. 이때 여러 인자들로 인해 쐐기 프레임의 저항력이 발생하게 되면, 인장봉의 변형을 감소시켜 초기 압착력 설정을 위한 라커의 물림각이 변하게 된다. 이러한 쐐기 프레임의 저항력은 롤러와 쐐기사이의 편심거리와 쐐기 프레임과 외곽 프레임 사이의 틈새에 따라 결정된다. 본 연구에서는 초기압착단계에서 인장봉에 전달되는 인장력을 실험을 통하여 측정함으로써 쐐기 프레임의 저항력이 라커의 쐐기형 레일클램프의 압착력에 미치는 영향을 평가하고자 한다.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.117-122
• /
• 2009

The wedge type rail clamp compresses the rails with small clamping force at first, and with large clamping force when the wind speed increases because of the wedge working. If the supporter is not installed in the rail clamp with V-type wedge when the wind speed increases more and more, the structure will occur overload which leads the structure to fracture. But in the clamp with U-type wedge the supporter is not necessary because the tangential angle of the wedge increases as the sliding distance increases. The proper shape of U-type wedge is determined by the initial clamping force and the tangential angle of the wedge. Accordingly we, first carry out the finite element analysis in order to analyze the relation between the sliding distance and the wedge angle. Next we suggest the proper shape of U-type wedge as analyze the relation between the radius of curvature and the sliding distance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1446-1449
• /
• 2003

In this study we analyze operation principle of wedge type rail clamp using in the harbor and when wind force applies to container crane, we calculate deformation in each part of rail clamp. As a result of calculation, we will design rail clamp supporter that forbid overload to be applied at rail clamp according to adjust climbing wedge distance of roller. It would be adapted various container capacity and wind velocity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1517-1520
• /
• 2003

In this paper, we design a wedge type rail-clamp which can protect container crane from wind with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine the weight for locker to descent smoothly with an initial clamping force of rail and pad. Therefor, this paper suggest a process to decide a wright within proper range which could be obtained using FEA of wedge type rail clamp.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.379-380
• /
• 2006

In this study we dealt with the relationship between the initial clamping force and the sliding distance in the wedge type rail clamp. The sliding distance is determined by the wedge angle and the initial clamping force. In order to derive the relation formula between the wedge angle and the sliding distance, we ad opt 5-kinds of the wedge angle, such as 2, 4, 6, 8, $10^{\circ}$. And then we analyze the effect of the initial clamping force on the sliding distance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1042-1045
• /
• 2005

The wedge type rail clamp has the operating mechanism: First, the jaw pad clamps a rail with small clamping force. Next as the wind speed increases, the clamping force of the Jaw pad Is Increased by the wedge. The initial clamping force of a jaw pad was determined by the clamping angle of a locker. In this study, we carried out the finite element analysis to evaluate the relationship between the clamping angle of a locker and the clamping force of a jaw pad with respect to the design wind speed, such as 2, 4, 6, 8, and 10m/s, we adopted the wedge type rail clamp fur 50tons class container crane with the wedge angle of $10^{\circ}$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.237-237
• /
• 2003

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.103-110
• /
• 2006

The rail clamp is very important device to prevent that a container crane slips along a rail due to the wind blast as well as to locate the crane in the set position during an operating mode. Recently, the design wind speed criteria were intensified from the wind speed of 16m/s to 35m/s during an operating mode, and from 50m/s to 75m/s during a stowed mode in Korea, according to the 'Inspection Criteria for Facilities and Equipments in Port' reformed after typhoon 'Maemi'. In order to design the wedge type rail clamp for the reinforced design wind speed criteria of 35m/s, we carried out the finite element analysis of the rail clamp with respect to the wedge angle, and analyzed the relationship between the wedge angle and the sliding distance of the rail clamp.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.58-64
• /
• 2007

The clamping force of a jaw pad is determined by the displacements of main part when two lockers are locked, after the clamping angle of a locker was set up in the wedge type rail clamp for a container crane. In this time, if the resistance of wedge frame generates due to several factors, the clamping angle of a locker to display the initial clamping force will be changed because of the reduction of displacement of extension bar. This resistance is determined by the eccentric distance between the roller and the wedge, and by the gap between the wedge frame and outer frame. In this study we measured the tensile force of both extension bar through the performance test of the prototype rail clamp in order to evaluate the effect of the resistance of wedge frame on the clamping force of the wedge type rail clamp.