• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.222-223
• /
• 2000

지금까지 gold-coated 반사체, cusp-shaped 반사체, 복합 포물 반사체(CPC), 난반사 공동체 등 다양한 형태의 반사체가 횡펌핑을 이용한 Nd:YAG 레이저의 개발을 위하여 고안되어졌다. 횡여기되는 Nd:YAG 레이저의 광학적 효율은 반사체의 형태, 다이오드 레이저의 파장, Nd:YAG 결정의 지름, Nd$^3$의 도핑농도에 따라 영향을 받는다.$^{(1)}$ 본 연구에서는 고출력의 횡여기 Nd:YAG 레이저를 개발할 목적으로 광여기 공동으로 사용된 난반사 공동체의 내부지름과 레이저 매질인 Nd:YAG 결정의 흡수계수 등 매개변수를 변화시켜 흡수분포와 출력을 계산하였으며, 이러한 매개변수들이 기울기 효율에 미치는 영향을 수치 해석적으로 연구해 보았다. 광선추적법에서 사용한 매개변수 중에서 다이오드 레이저의 파장은 808 nm이고, 반사율은 90%이며, 여기 다이오드 출력은 1080 W이다. 난반사 공동체$^{(2)}$ 의 반사율은 95.7%이고, 결정의 투과율은 90%이며, 결정의 반지름은 2.5 mm이다. 사용된 여기 구조도는 그림 1과 같다. 여기헤드는 Nd:YAG 결정, 난반사 공동체, 그리고 3개의 360 W급 다이오드 어레이들로 구성되어 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.430-433
• /
• 2005

Laser bonding between similar and dissimilar thermoplastics has been investigated by making use of laser transmission weld technique. Spot welding of two layers of plastic materials has been demonstrated by using of a high-quality diode-laser with 808nm wavelength. Weld areas increases according to power density, exposure time. The results of peel out test show that peel strengths increase with the area of molten plastics. Layers, which have the same chemical properties, have good bonding qualities. A bonding method which dye film is coated on the interface is used for laser bonding between plastics with high transmission for laser wavelength. Laser transmission bonding is worthy of attention because it is not in contact, requires a few tooling devices, allows a flexible energy delivery and produces nearly invisible welds

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.46-47
• /
• 2001

난반사체를 이용한 다이오드 횡여기 Yb：YAG 레이저에서 레이저 결정의 반경과 레이저 결정의 도핑 농도 등을 매개변수로 하여 이들 매개변수의 변화가 열초점거리에 미치는 영향을 분석해 보았다. 이 때 결정의 굴절률은 1.826, 결정의 투과율은 90％, 결정의 길이는 10mm로 하였으며, 냉각수의 굴절률은 1.33, 냉각튜브의 두께는 1.5 mm로 하였다. 또 렌즈를 통과한 황선의 divergence는 5도, 난반사 공동체의 반사율은 95.7％로 계산하였다. 다이오드의 전체 출력은 600 W이다. 펌프헤드의 구조도를 그림1에 보였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.124-127
• /
• 2012

We designed and fabricated dichroic filters for high-power fiber lasers to protect the pumping laser diode from counterpropagating laser beams. The transmittance at laser diode wavelengths of 905 nm~925 nm was designed to be less than 0.1% and the transmittance at the fiber laser or Brillouin scattering wavelengths of 1020 nm ~ 1100 nm was designed to be more than 99.9%. Since oxide materials have good adhesion to the $SiO_2$ substrate, $SiO_2/Ta_2O_5$ were used as coating materials. The filter was fabricated according to our optimized design and its characteristics were compared with the theoretical design. As a result, the transmittance at laser diode wavelengths of 905 nm~925 nm was measured to be less than 0.1%, and the transmittance at the fiber laser or Brillouin scattering wavelengths of 1020 nm~1100 nm was measured to be more than 95.5%, which coincided well with the theoretical design considering processing errors. The filter was found to operate well over 1W of input laser power.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.231-235
• /
• 1998

Passively Q-switched, laser diode(LD) end-pumped Nd:YAG laser was demonstrated by using $Cr^{4+}$:YAG as a saturable absorber. In addition , we could calculate an excitation efficiency, which is an important parameter to evaluate the pumping geometry, directly by measuring the absorbed power in Nd:YAG at threshold condition. We found that output parameters such as average power, pulse duration, and repetition rate strongly depended on the low intensity transmission of $Cr^{4+}$:YAG and driving current of lase diode. The maximum Q-switched output power of 1 W was obtained with 40 kHz repetition rate. The pulse duration was varied from 50 ns to 200 ns.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1992

Frequency modulation spectroscopy of the super-cavity, of which finesse is app. 40,000 has been demonstrated by using a sigle mode He-Ne laser. In-phase and quardrature components of frequency modulation signals (FM signal) were obtained by using the 1.5 MHz-driven-electrooptic phase modulator. The vector locus of the FM signa in the phase space, which is consisted of in-phase and quardrature components of the FM signal, was observed and analyzed for the dependence of FM signal upon the phase of the reference signal of a phase-sensitive-detector. According to rotating the phase of the reference signal, the vector locus was observed to rotate with the same phase angle as the reference signal. The in-phase component of the FM signals will be used to stabilize the frequency of the He-Ne laser to the resonant frequency of the super-cavity.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.206-207
• /
• 2003

전자기 유도 투과(electromagnetically induced transparency ； EIT)는 원자의 공명 진동수를 갖는 조사광이 원자 매질을 통과할 때, 강한 결합광에 의한 효과로 매질에 흡수되지 않고 투과하는 양자 간섭 효과로써 원자결맞음 현상의 가장 대표적인 현상 중의 하나이다. EIT 현상은 Boller 등에 의해서 고출력 펄스 레이저를 이용하여 Strontium 증기에서 처음 관측된 이후, 여러 가지 원자와 분자의 증기 셀, 원자 빔, 고체, 냉각된 원자, 그리고 BEC(Bose Einstein condensate)상태에서 다양한 연구들이 이루어지고 있다. (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2014

A stretchable polymeric membrane shaped diffuser was used to homogenize the coherent laser beam. The developed RGB module was used to focus and defocus test by beam combiners. Average oscillation frequency was set at 180Hz~300Hz and it resulted in the best homogenization effect in visual range. The blue laser module turned out to be the worst case for the transmission and primary reason is believed to be the short length of irradiated laser beam. The developed system removed the speckling and the brightness was decreased by 10 ~ 20% for the RGB laser. Overall the brightness was decreased by 13% and homogenity with respect to the temporal axis was improved from 30fs to 110fs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.136-137
• /
• 2004

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.35-36
• /
• 2012

생체센서, 나노안테나, 테라헤르츠 전송선, 나노레이저, 물성분석기의 기본구조로 쓰이는 나노원기둥 배열의 전자기적 특성을 해석할 수 있는 기법을 소개한다. 테라헤르츠 이상 주파수에서는 반드시 금속을 유전체로 모형화해야한다. 전자기파가 유전체 나노원기둥 배열에서 반사와 투과되는 특성을 공진주파수 관점에서 연구하여 다양한 첨단응용에 활용할 수 있다.