• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.145-146
• /
• 2009

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.150-151
• /
• 1993

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.46-46
• /
• 1996

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2001

Chip-on-glass(COG) mounting of area array electronic packages was attempted by heating the rear surface of a contact pad film deposited on a glass substrate. The pads consisted of an adhesion (i.e. Cr or Ti) and a top coating layer(i.e. Ni or Cu) were healed by the UV laser beam transmitted through the glass substrate. The lather energy absorbed on the pad raised the temperature of a solder ball which is in physical contact with the pad, and formed a reflowed solder bump. The effects of the adhesion and top coating layer on the laser reflow soldering were studied by measuring temperature profile of the ball during the laser heating process. The results were discussed based on the measurement of reflectivity of the adhesion layer. In addition, the microstructures of solder bumps and their mechanical properties were examined.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.288-295
• /
• 1995

We have studied about spatial wavefront analysis of a pulsed laser output beam by means of an imaging unstable ring resonator with an infinite Fresnel number. We have constructed a Newtonian telescope type NBUR (Negative Branch Unstable Ring) Nd:YAG laser with 4 plane mirrors. Provided that the NBUR resonator is under self imaging condition, the resonator could be reduced diffraction effects which were occuring to the beam transmitting through the circular aperture of scraper mirror in the resonator. We have observed enhancement in the spatial coherence of wavefronts of laser beam due to the iterative round trips of the self imaging beam inside the ring resonator. The information on the spatial wavefronts was determined by the fringe patterns from Mach-Zehnder interferometer and the fringe analysis by means of the Fourier transform method showed the distortion of wavefronts of less than 0.2), In comparison with a standing wave type resonator, we have confirmed that the spatial coherence of the NBUR Nd:YAG laser output beam was enhanced as much as 75%. s 75%.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.55-63
• /
• 2004

빛이 입사각별로 태양투과율이 제어되어지는 첨단 창과 같은 물체를 통과할 때 투과되는 성분은 직달투과와 산란투과성분으로 볼 수 있다. 직달투과는 물체를 통과하면서 일정한 방향으로 굴절되어 투과되는 성질을 말하고, 산란투과는 직달투과를 제외한 나머지 방향의 성분들의 형태를 말한다. 이러한 첨단 창의 냉난방부하에 미치는 에너지성능을 평가하기 위해서는 산란투과에 대한 정보가 필요하고, 이에 대한 물리적 변수는 입사각, 출력각, 양방향 투과율 분산함수인 BTDF로 정의된다. 본 논문에서는 3개의 서로 나른 첨단 창 (1) $42^{\circ}/5^{\circ}$ 프리즘 창 판넬, (2) 레이저 컷 판넬 (3) $45^{\circ}$ 프리즘 3M 필름의 BTDF 데이터 획득을 위한 실험 방안을 소개하고, 실험을 통해 획득한 정보를 이용하여 계산식과 비교 검증을 하였다. 따라서 이 검증된 방안을 이용하여 지역별 냉난방 부하를 최소화 할 수 있는 입사각별로 태양 투과율 제어 판넬을 선정할 수 있게 되었다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.263-267
• /
• 2004

We have investigated the characteristics of a Nd:YAG laser pumped by a cw Ti:sapphire laser. When the pumping power of the Ti:sapphire laser was 850 ㎽, the maximum output power of the Nd:YAG laser was 450 ㎽. As a result, the slope efficiency for the output power of the Nd:YAG laser was measured to be 56%. We have also investigated the characteristics of a passively Q-switched Nd:YAG laser by using a Cr$^{4+}$:YAG as saturable absorber with initial transmission of 90%. The maximum average output power of 200 ㎽ was obtained with repetition rate of 23.8 KHz and pulse width of 17.0 ns.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.200-201
• /
• 2000

원자와 빛의 결맞음 효과로서 나타나는 많은 흥미로운 현상들 중에서 전자기파 유도 투과(Electro-magnetic Induced Transparency ; EIT)는 원자가 공진주파수를 가진 레이저와 상호작용하였을 때, 광자를 흡수하지 않고 투과하는 현상으로서, 주로 3준위 구도에서 연구되어왔다. 그러나 최근 축퇴된 2준위 구도에서 원자와 빛의 결맞음 효과가 연구되면서 EIT와 정반대의 현상인 전자기 유도 흡수(Electromagnetic Induced Absorption ; EIA)의 관측이 보고되었고 그것과 연관된 물리적 특성들의 연구가 시도되고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.26-27
• /
• 2003

이광자 흡수가 큰 유기 화합물의 개발과 응용을 위해 이광자 흡수과정의 메커니즘을 이해하는 것은 매우 중요하다. 일반적으로 이광자 흡수를 측정하는 방법으로는 비선형 투과나 이광자 여기 형광을 측정하여 이광자 흡수계수를 구하는 방법이 사용되며, 많은 경우 측정에 사용된 레이저의 펄스 폭에 따라 다른 값을 보고하고 있다 본 연구에서는 7 ns와 35 ps-펄스 레이저에서 DTT 유도체의 비선형흡수를 측정하여 그 결과를 여기준위 흡수에 의한 이광자 흡수의 증가로 설명하였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.186-190
• /
• 1998

We fabricated a diode-side pumped high power Nd:YAG laser with a gold coated flow tube(diameter of 10mm) and three sets of 140W diode bar. The diameter of Nd:YAG rod was 6mm and its length was 130mm. We obtained 130W cw power from a linear resonator with an 11% output coupler, which corresponds to the slope efficiency of 43% and the optical efficiency of 31%. The measured beam quality factor(M$^2$) reached about 85 which is fairly large due to the large size of the rod. Thermal lensing of the rod was measured to be 5.3-7.4D/$kW_{pump}$ when the laser was operating.