• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1045-1046
• /
• 2011

본 논문에서는 굴곡면 커버내에 전기회로를 구현시 그 동안 포토리소그라피 공정으로 제작된 PCB를 휴대기 등 내부 케이스에 부착하여 전기회로를 구현하였으나 본 논문에서는 PCB없이 직접 케이스인 복합 폴리머소재에 레이저조사에 의해 패턴과 무전해도금으로 전기회로를 직접구현하는 기술이다. 이러한 방법은 제안한 3단계 공정기법에 의해 가능하며, 즉 사출형 복합폴리머소재제작, 소재의 레이저조사에 의한 시드패턴 구현 및 형성시드의 무전해도금에 의한 전도성패턴구현 공정을 통하여 곡면커버의 전기회로구현이 가능하다. 이에 따라 기존의 복잡한 10 단계 이상의 포토리소그라피 공정을 레이저조사에 의한 3단계 공정으로 간소화함으로서 제품의 생산성향상, 다량장비 구입절감, 작업공간축소 및 기타 소재절감 등의 경제적 효과를 얻을 수 있다. 응용분야는 2차원 평면 전기회로 외에 3차원 곡면형상의 제품인 자동차, 휴대폰, 의료기, 센서, 오토바이 등의 커버에 직접회로 응용이 가능하다. 이에 대한 타당성은 실험결과를 통하여 입증하였다.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.33-44
• /
• 1997

연소상태의 온도를 이동하면서 측정할 수 있는 광대역 코헤런트 반스톡스 라만 분광기를 제작하였다. 분광기의 온도 측정 정확도를 향상시키기 위하여 무모드레이저를 제작하여 스톡스광으로 사용하였다. 이동형 CARS 분광기에 적합하도록 CARS신호 측정용 단색기를 제작하여 분광기 내부에 설치 하였다. CARS 분광기의 온도 측정의 정확도를 알아보려고 흑연관 전기로를 이용하여 표준 복사온도계와 CARS 분광기로 측정한 온도의 차이를 측정하였다. 장치의 온도 정확도는 1000 K - 2400 K 사이의 온도영역에서 2%이내 였다. 무모드 색소레이저의 출력 스펙트럼의 시간에 따른 안정도를 측정하여 온도측정에 미치는 오차를 조사한 결과 1500 K에서 5 시간 동안 1.5 %이내 였다. 평면 화염 버너에서 프로판공기 예혼합 화염의 온도 분포를 측정하여 이 장치의 응용 가능성을 확인하였다.

• Korean Journal of Optics and Photonics
• /
• v.26 no.1
• /
• pp.38-43
• /
• 2015

We propose a linearly polarized long-cavity Yb:YAG laser with a variable-reflectivity output coupler and investigate its output characteristics. The variable output coupler consists of a polarized beam splitter and a quarter-wave plate. The linearly polarized laser has a long cavity length of about 3.7 m. The slope efficiency of the proposed laser is 19%, and the beam quality ($M^2$) is about 1.2.

• Korean Journal of Optics and Photonics
• /
• v.7 no.2
• /
• pp.157-161
• /
• 1996

A simple laser Doppler velocimeter(LDV) using a $CO_2$ laser with its self-mixing effect has been developed. We measured the laser power which was modulated by Doppler frequency, when monochromatic laser light was focused to a moving target. The Doppler-shifted frequency was controlled by changing rotating speed of the turntable or the cosine of the angle between the direction of the laser beam and that of the rotating velocity.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.543-547
• /
• 2002

We have constructed two extended-cavity diode lasers which are phase-locked with a 9.2 GHz frequency offset. We adopted a digital servo circuit for the phase-locking. The relative linewidth of the phase-locked lasers was less than 2 Hz. Using the measured beat spectrum, we found the carrier concentration to be about 93 %. We measured phase noise and relative frequency stability of the lasers. The Allan deviation at the gate time of 20 s was $2.7{\times}10^{-19}$.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.60-67
• /
• 2006

We constructed a TEA $N_2$ laser which consists of spark gap, pulse type high voltage power supply, Blumlein transmission line circuit, laser tube with Ernst electrode. We observed the self-preionization with an optical fiber in the spark gap and laser tube. The higher voltage power supplied to the Blumlein transmission line circuit, the better preionization was. An U-type transformer yielded better stability and output power than an I-type transformer. The discharge time after triggering a spark gap for the U-type transformer was also short. We obtained the stability of $2.7\%$ and output power of $36{\mu}J$ when the optimum conditions of the laser operation were spark gap distance of 6.0 mm, electrode distance in laser tube of 5.0 mm, $N_2$ gas flow rate in spark gap of 1500 cc/min, $N_2$ gas flow rate in laser tube of 4 ${\iota}$/min, output window reflectivity of $40\%$ and repetition rate of 10 Hz.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.177-183
• /
• 2005

In this work, Inconel 600, Inconel 625 and Haynes 230 are welding using Nd:YAG laser and electron bear. These heat-resistant alloys are typically used for the liquid thruster. To examine, the affects of experimental parameters on weld ability, the plate welding of these materials were carried out using both Nd:YAG laser and electron bear. Also, the micro-structure, micro-hardness, and tensile strength of the specimens were analyzed. from the analysis of the experimental results of laser and electron beam welding, we have obtained the optimal welding conditions.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.214-221
• /
• 1995

When the broad pressure region (0.5-3.5 atm) of laser media is pumped by 70 ns [FWHM] electronbeam accelerator (800 kV, 21 kA), the correlation between free-runnuing XeF$(C\rightarrowA$ excimer laser output and Xe concentration are studied. The resonator consisted of dichroic output coupler, and the laser output is optimized with laser media $(Xe/F_2/Ar)$ as functions of total pressure and gas mixing ratio. Under the condition of F2 0.46% fixed, the laser intrinsic efficiencies of 0.38%, 1.03%, and 0.29% are obtained at 1. 2, and 3 atm, respectively. So then the peaks of laser intrinsic efficiency occured to the higher Xe concentration with decreasing total gas pressure. By analyzing the kinetics for the $XeF^*(C)$ formation efficiency and XeF$(C\rightarrowA$ laser extraction efficiency the dependence of Xe concentration on their correlation is explained. As the results we propose efficient operation of an atmosphericpressure XeF$(C\rightarrowA$ laser. laser.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.53-57
• /
• 1999

We established the laser oscillator using Nd:YAG crystal grown at Ssang Yong company in Korea and investigated the characteristics of oscillation, Q-switching and wave front of output beam. We measured the single pass gain by controlling the threshold input energy with two output couplers of different output reflectances. Moreover, we compared the gain measured by different output couplers with the gain directly measured by the laser amplifier. The peak power of Q-switching, the pulse width, and the single pass gain coefficient at the threshold energy were 1.5 MW, 30ns, and 0.0958 cm-$^1$ respectively and they were compared with those of the commercial Nd:YAG crystal. Our crystal was proved to be as good as the commercial crystal.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.90-94
• /
• 2014

We propose a Yb:YAG laser Q-switched by a semiconductor saturable absorber and a laser output coupler composed of a polarizer and a quarter-wave plate, and we investigate the output characteristics of the proposed Q-switched laser. We show that the laser power can be varied by rotation of the quarter-wave plate.