• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.668-673
• /
• 1997

A Single-crystalline Mn-Zn Ferrite (110 orientation) was masklessly etched by focused Ar laser irradiation in an H$_3$PO$_4$ solution. The depth of the etched grooves increases with increasing a laser power, decreasing a scan speed, and increasing the H$_3$PO$_4$concentration. The width of the etched grooves increases with a increasing laser power, but was relatively insensitive to the scan speed and H$_3$PO$_4$concentration. High etching rate of up to 714 ${\mu}{\textrm}{m}$/s and an aspect ratio of 6 for vertical slab structure have been obtained by the light-guiding effect of the laser bean in the H$_3$PO$_4$ solution.

• Laser Solutions
• /
• v.16 no.4
• /
• pp.12-16
• /
• 2013

For mass production of electronic devices, the processing of the printing roll is one of the most important key technologies for printed electronics technology. A roll of printing process, the gravure printing that is used to print the electronic device is most often used. The indirect laser processing has been used in order to produce printing roll for gravure printing. It consists of the following processing that is coating of photo polymer or black lacquer on the surface of printing roll, pattering using a laser beam and etching process. In this study, we have carried out study on the coating and etching for $25{\mu}m$ line width on the printing roll. To do this goals, a $4{\mu}m$ coating thickness and 20% average coating thickness of the coating homogeneity of variance is performed. The factors to determine the thickness and homogeneity are a viscosity of coating solution, the liquid injection, the number of injection, feed rate, rotational speed, and the like. After the laser patterning, a line width of $25{\mu}m$ or less was confirmed to be processed through etching and the chromium plating process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.533-538
• /
• 2011

A plastic-compatible low-temperature metal deposition and patterning process is essential for the fabrication of flexible electronics because they are usually built on a heat-sensitive flexible substrate, for example plastic, fabric, paper, or metal foil. There is considerable interest in solution-processible metal nanoparticle ink deposition and patterning by selective laser sintering. It provides flexible electronics fabrication without the use of conventional photolithography or vacuum deposition techniques. We summarize our recent progress on the selective laser sintering of metals and metal oxide nanoparticles on a polymer substrate to realize flexible electronics such as flexible displays and flexible solar cells. Future research directions are also discussed.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.28-34
• /
• 2020

A structure in which GaAs and AlGaAs epilayers are formed with a metal organic chemical vapor deposition equipment on a GaAs wafer similar to the structure of making a vertical cavity surface emitting laser is used. Photonic Quantum Ring (PQR) devices that are naturally generated by 3D resonance are manufactured by chemically assisted ion beam etching technology, which is a dry etching method. A new technology that can be fabricated has been studied, and as a result, the possibility of wet etching of a solution containing phosphoric acid, hydrogen peroxide and methanol was investigated, and the device fabrication by applying this method are also discussed. In addition, the spectrum of the fabricated optical device was measured, and the results were theoretically analyzed and compared with the wavelength value obtained by the measurement. It is expected that the PQR device will be able to model cells in a three-dimensional shape or be applied to the display field.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.202-206
• /
• 2004

본 연구에서는 고밀도로 백색 발광다이오드를 웨이퍼 상에 제작하기 위한 제조공정에 필요한 포토마스크를 제작하는 연구를 수행하였다. 발광다이오드 한 개의 패턴을 웨이퍼상에 연속적으로 배열하여 이를 병렬로 연결하는 금속배선을 고려하였다. AutoCAD의 DWG 파일로 캐드작업을 수행하여 이를 DXF 파일로 변환하였으며, 레이저빔으로 스켄하여 소다라임 유리판 위에 크롬을 식각함으로써 포토마스크를 제작하였다. 이는 기존에 제작된 개별칩 형태의 발광다이오드 제작공정을 집적공정화함으로써 웨이퍼상에서 전면 발광하는 조명광원의 구조를 갖는다. 또한 이를 활용하여 백색 발광다이오드 집적칩을 제작하려 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.249-250
• /
• 2011

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.94-98
• /
• 2007

AC PDP에 사용되는 ITO 전극의 공정시간을 단축시키고 생산성을 향상시키기 위해서 $Nd:YVO_4$ laser(${\lambda}=1064\;nm$)를 사용하여 ITO 전극 패턴을 형성하였다. ITO etchant를 사용하여 ITO 전극 패턴을 형성한 샘플과 비교해서 laser를 사용하여 제작한 샘플은 ITO 라인 가장자리에 shoulder와 물결무늬를 형성했다. Q스위치 $Nd:YVO_4$ laser와 갈바노메트릭 스캐닝 시스템을 사용하여 500 mm/s의 스캔속도와 40 kHz의 펄스 반복 율을 기본조건으로 결정했다. PDP 테스트 샘플을 제작하여 방전 테스트를 진행하였다. 사진식각공정을 이용하여 만든 PDP 샘플과 비교해서 laser를 이용하여 제작한 PDP 샘플의 최소 방전유지전압은 더 높게 측정됐다. 이것은 ITO 라인의 shoulder와 물결무늬의 형성과 관련이 있다고 판단된다. 본 실험을 통해 레이저를 이용한 PDP용 ITO 전극막의 직접 패터닝 가능성을 확인할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.408-413
• /
• 1995

We investigated the effect of mechanical backside damage upon minority carrier recombination lifetime measurement in Czochralski silicon substrate by laser excitation/microwave reflection photoconductance decay method. The intensity of mechanical damage was evaluated by X-ray double crystal rocking curve, X-ray section topography and wet oxidation/preferential etch methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the threshold full width at half maximum value which affect minority carrier lifetime measurement is about 13 secs.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.84-88
• /
• 2005

본 연구에서는 백색광원용 조명램프에 필요한 고밀도로 집적된 LED 어레이를 제작하기 위하여 반도체제조 공정에 필요한 포토마스크를 AutoCAD 상에서 설계하였으며 레이저 리소그래피 장비를 이용하여 포토마스크를 제작하였다. 웨이퍼상에 LED칩을 개별적으로 제작한 후 이들을 직렬 및 병렬로 금속배선하여 연결하였다. 특히 AutoCAD로 각 공정의 포토마스크 패턴을 설계 작업한 후 DWG 파일을 DXF 파일로 변환하여 레이저빔으로 스캔닝하였다. 이를 소다라임 유리판 위에 크롬을 증착한 후 각 패턴에 맞추어 식각 함으로써 포토마스크를 제작하였다. 또한 2인치 InGaN/GaN 다중 양자우물구조의 광소자용 에피박막이 증착된 사파이어 웨이퍼에 포토마스크를 활용하여 반도체 제조공정을 수행하였으며, 금속배선된 백색LED램프를 제작하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.709-713
• /
• 2004

Characteristics of laser-assisted wet etching of titanium in phosphoric acid were investigated to examine the feasibility of this method for fabrication of high aspect ratio microchannels. Laser power, number of scans, etchant concentration, position of beam waist and scanning speed were taken into consideration as the major process parameters exerting the temperature distribution and the cross sectional profile of etched channels. Experimental results indicated that laser power influences on both etch width and depth while number of scans and scanning speed mainly affect on the etch depth. At a low etchant concentration, the cross sectional profile of an etched channel becomes a U-shape but it gradually turns into a V-shape as the concentration increases. On the other hand, surface of the laser beam focus with respect to the sample surface is found to be a key factor determining the bubble dynamics and thus the process stability. It is demonstrated that metallic microchannels with different cross sectional profiles can be fabricated by properly controlling the process parameters. Microchannels of aspect ratio up to 8 with the width and depth ranges of 8∼32 m and 50∼300 m, respectively, were fabricated.