• 한국광학회지
• /
• 제8권2호
• /
• pp.165-168
• /
• 1997

780 nm의 반도체 레이저, compact disk의 광 pick-up용 actuator, 그리고 4분할 photodiode를 이용하여 scanning confocal microscope를 구성하여 시료면의 높이와 재질의 차이를 측정하였다. 4분할 photodiode에 검출되는 오차 신호를 이용하여 렌즈가 장착되어 있는 actuator를 움직이면서 시료면에 레이저 광속의 초점이 항상 위치하도록 하였으며, 이 때 actuator에 흐르고 있는 전류를 시료면의 높이로 나타내어 3차원 영상으로 표현하였다. 또한 재질의 차이는 4분할 photodiode에 검출되는 합산 신호를 이용하여 컬러 프린터에 나타나는 3차원 영상의 색을 다르게 나타내었다. 전체적인 크기도 30 mm * 20 mm * 20 mm 로서 작고 간단하며 scan 영역은 최대 1.6 mm * 1.6 mm이다. 반사광의 세기를 이용한 scanning confocal microscope의 영상과 4분할 photodiode에 검출되는 오차 신호를 적분하는 방식을 이용한 scanning confocal microscope의 영상을 구하여 그 차이를 비교하였다.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• 한국광학회지
• /
• 제10권1호
• /
• pp.15-20
• /
• 1999

레이저 프린터의 핵심부품 중 하나인 LSu(Laser Scanning Unit)를 구성하는 광학부품 및 각 부품들의 역할에 대해서 살펴보았고, 각 부품별로 기초설계를 한 후 Code-V를 사용하여 최적설계를 했다. 특히 f$\theta$렌즈 설게시 기존제품들을 비교.분석하여 설계에 반영했다. 본 논문에서는 LSU의 저가격화 및 소형화를 위해, 초점거리가 136mm인 2매의 플라스틱 f$\theta$렌즈로 구성된 LSU용 광학계를 설계하였다.

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 1989년도 한글날기념 학술대회 발표논문집
• /
• pp.132-136
• /
• 1989

본 논문에서는 한국과학기술원 전산학과 인공지능연구실에서 개발하고 있는 한글 문서 인식 시스템 SILNOON을 소개한다. 본 연구는 인쇄체 한글로 작성된 문서를 자동으로 인식하여 컴퓨터 화일로 저장하고, 인식된 문서를 편집 및 수정하여 레이저 프린터를 통하여 출력할 수 있는 실용적인 한글 문서 인식 시스템의 개발을 그 목적으로 하고 있다. SILNOON 시스템은 크게 전처리, 문자 인식, 후처리 등의 세 단계로 구성되어 있다. 본 논문에서는 SILNOON 시스템의 각 구성 단계에 대하여 설명하고 개인용 컴퓨터 상에서 구현되어 있는 시제품을 가지고서 실험한 결과를 발표한다.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.386-390
• /
• 2006

Global consumption of aspheric lens will expand rapidly due to golbal transformation of the electronics based industry to optics based mechatronics. Especially, F-Theta lens is one of important parts in Laser Scanning Unit(LSU) because it affects the optical performance of LSU dominantly. Non axisymmetric machine based processing techologies are required to obtain high accuracy in utlra-precision aspheric core, the most important component in plastic injection molded F-Theta lens assembly. In this study, the core with non-axisymmetric aspheric shape which is used to emit the F-Theta lens was processed using the ultra precision processing technology and the shape accuracy of the core was measured. And the results there of were evaluated and compared with the emitted shape accuracy of F-Theta lens.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.53-60
• /
• 1998

The purpose of this paper is to meausre the electrophotographic characteristics of double-layered organic photoreceptor and to evaluate an application for the laser beam printer drum. The characte carrier generation layer(CGL) of double-layered photoreceptor was fabricated with .tau.-H$_{2}$Pc which has high photosensitivity in the near-infrareed region(thickness is about 0.3.mu.m), and Oxadiazole derivative was chosen as a charge carrier transport layer(CTL) because of its high hole mobility. To observe the electrophotographic characteristics of the photoreceptor, we measured the charge acceptance, dark-decay ratio, residual potential after light irradiation. From the result of this study, proper thickness of CTL was about 10.mu.m. Also it's realized that electrophotographic characteristics of the photoreceptor were depend on the thickness of the CTL and the initial surface potential.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.854-855
• /
• 2015

Electric machines for office automation device such as printer and scanner have been required the low noise and vibration performance. Many researches about the low noise and vibration of polygon mirror scanner motor have been also progressed. The noise and vibration of polygon mirror scanner motor can be classified by aerodynamic, structural and electromagnetic. Electromagnetic noise and vibration can be occurred by high cogging torque and nonsinusoidal back EMF. To improve the cogging torque and back EMF characteristic, we apply unequal air-gap. To analyse characteristic of a polygon mirror scanner motor, two dimensional finite element method is used. To minimize the cogging torque of a polygon mirror motor, Kriging based on latin hypercube sampling (LHS) is utilized. As a result, the cogging torque and torque ripple improved while maintaining the back EMF and average torque.

• 조명전기설비학회논문지
• /
• 제14권4호
• /
• pp.73-76
• /
• 2000

본드자석을 사용한 마그네트 롤러의 배향은 사출시 금형내의 자화분포에 의해 결청된다. 본 연구는 본드자석올 사용한 레이저 프린터용 마그네트 롤러의 배향을 자기 해석을 이용하여 설계하고 이를 이용하여 마그네트 롤러를 제작, 측정한 결과이다. 제작한 비대칭 4극 마그네트 롤러에 대해 측정한 결과 제품의 주요 특성인 자극의 자속밀도 및 극간 각도가 설계치와 사양의 오차범위 내에서 만족함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2231-2235
• /
• 2008

Thermal performance of fusing system in laser printer is determined by FPOT(First print out time) required and toner fusing quality. FPOT is influenced by the thermal resistance of fusing system between heat source and nip region. Also FPOT is depended by the heat source power and toner fusing temperature. The fusing quality of toner is decided by the temperature, pressure and duration time in nip region. In this study, I have performed thermal analysis for the toner fusing system. Computational simulation has been used to understand the effect of heat source power and printing speed etc. on the temperature distribution of the fusing system. Also in order to predict fusing quality, numerical simulation of the process that paper is continuously supplied to the nip regions were performed. In comparison with the experimental results of the fusing quality vs transferred calory to the toner layer, I could evaluate various fusing condition parameters effected on the thermal performance.