• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.165-168
• /
• 1997

We have constructed a scanning confocal microscope using a 780 nm semiconductor laser, an actuator of a compact disk player and a quad-detector. This device detects heights and characteristics of a surface. The laser focus was located at the surface of a sample by using the error signal obtained by a quad-dector, and the current supplied to the actuator for lens was displayed as a height. The materials of a surface were classified according to reflected total intensities and was displayed by different color in a monitor. The device has very samll dimensions of 30 mm$\times$20 mm$\times$20 mm and scan field is 1.6 mm$\times$1.6mm. We obtained two images, one using only reflected light and the other using an error signal from a quad-detector and compared these two images.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.15-20
• /
• 1999

Laser Scanning Unit (LSU), which is one of the core parts of laser printer, consists of LD Module, cylinder lens, polygon mirror and f$\theta$ lens. After making an initial design on each part, we optimized the one which satisfies the user specification. The optimized optical system has diffraction limited performance for the slit size of 2.7 mm$\times$1.6 mm, f$\theta$ characteristics less than 0.3% and field curvature less 1.2 mm. We also calcurate tolerance of each part based on RSS(Root Sum Square) method to manufacture LSU for mass production.

• Annual Conference on Human and Language Technology
• /
• 1989.10a
• /
• pp.132-136
• /
• 1989

본 논문에서는 한국과학기술원 전산학과 인공지능연구실에서 개발하고 있는 한글 문서 인식 시스템 SILNOON을 소개한다. 본 연구는 인쇄체 한글로 작성된 문서를 자동으로 인식하여 컴퓨터 화일로 저장하고, 인식된 문서를 편집 및 수정하여 레이저 프린터를 통하여 출력할 수 있는 실용적인 한글 문서 인식 시스템의 개발을 그 목적으로 하고 있다. SILNOON 시스템은 크게 전처리, 문자 인식, 후처리 등의 세 단계로 구성되어 있다. 본 논문에서는 SILNOON 시스템의 각 구성 단계에 대하여 설명하고 개인용 컴퓨터 상에서 구현되어 있는 시제품을 가지고서 실험한 결과를 발표한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.386-390
• /
• 2006

Global consumption of aspheric lens will expand rapidly due to golbal transformation of the electronics based industry to optics based mechatronics. Especially, F-Theta lens is one of important parts in Laser Scanning Unit(LSU) because it affects the optical performance of LSU dominantly. Non axisymmetric machine based processing techologies are required to obtain high accuracy in utlra-precision aspheric core, the most important component in plastic injection molded F-Theta lens assembly. In this study, the core with non-axisymmetric aspheric shape which is used to emit the F-Theta lens was processed using the ultra precision processing technology and the shape accuracy of the core was measured. And the results there of were evaluated and compared with the emitted shape accuracy of F-Theta lens.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.53-60
• /
• 1998

The purpose of this paper is to meausre the electrophotographic characteristics of double-layered organic photoreceptor and to evaluate an application for the laser beam printer drum. The characte carrier generation layer(CGL) of double-layered photoreceptor was fabricated with .tau.-H$_{2}$Pc which has high photosensitivity in the near-infrareed region(thickness is about 0.3.mu.m), and Oxadiazole derivative was chosen as a charge carrier transport layer(CTL) because of its high hole mobility. To observe the electrophotographic characteristics of the photoreceptor, we measured the charge acceptance, dark-decay ratio, residual potential after light irradiation. From the result of this study, proper thickness of CTL was about 10.mu.m. Also it's realized that electrophotographic characteristics of the photoreceptor were depend on the thickness of the CTL and the initial surface potential.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.854-855
• /
• 2015

Electric machines for office automation device such as printer and scanner have been required the low noise and vibration performance. Many researches about the low noise and vibration of polygon mirror scanner motor have been also progressed. The noise and vibration of polygon mirror scanner motor can be classified by aerodynamic, structural and electromagnetic. Electromagnetic noise and vibration can be occurred by high cogging torque and nonsinusoidal back EMF. To improve the cogging torque and back EMF characteristic, we apply unequal air-gap. To analyse characteristic of a polygon mirror scanner motor, two dimensional finite element method is used. To minimize the cogging torque of a polygon mirror motor, Kriging based on latin hypercube sampling (LHS) is utilized. As a result, the cogging torque and torque ripple improved while maintaining the back EMF and average torque.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.73-76
• /
• 2000

The magnetization direction of bond magnet is decided by the flux distribution of injection mold during the manufacturing process. The injection mold for the magnetic roller of the laser printer is designed and analysed to fit the design specification. The experiment showed that the flux distribution of a magnet roller agreed with the analysis and the given specifications.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2231-2235
• /
• 2008

Thermal performance of fusing system in laser printer is determined by FPOT(First print out time) required and toner fusing quality. FPOT is influenced by the thermal resistance of fusing system between heat source and nip region. Also FPOT is depended by the heat source power and toner fusing temperature. The fusing quality of toner is decided by the temperature, pressure and duration time in nip region. In this study, I have performed thermal analysis for the toner fusing system. Computational simulation has been used to understand the effect of heat source power and printing speed etc. on the temperature distribution of the fusing system. Also in order to predict fusing quality, numerical simulation of the process that paper is continuously supplied to the nip regions were performed. In comparison with the experimental results of the fusing quality vs transferred calory to the toner layer, I could evaluate various fusing condition parameters effected on the thermal performance.